NEB3I0T IoT Device
“
Specifications:
- Product Model: G3S-KS-OM-NA-P-B
G3S-KS-OM-NA-L - Version: Version 0.1
- Manufacturer: Shenzhen Omni Intelligent
Technology Co., LTD - Website: www.omnisharing.cn
Product Information:
1. Product Description:
G3S-KS-OM-NA-P-B and G3S-KS-OM-NA-L is a customized IOT for
scooters, Ebike, and other models. The product design features
semi-embedded assembly with BLE, Voice notification, 4G, GPS, and
other functions. Communication modes include URAT and CAN.
2. Product Features:
- IPX 7 waterproof
- Dual-frequency and multi-mode high-precision positioning
- BLE 5.2
- 4G LTE-Cat1
- Clear Voice Notification
- Wide Working Voltage
- URAT communication / CAN communication
- Semi-embedded assembly method for robustness
- Compact size
3. Technical Parameters:
| No. | Item | Specification |
|---|---|---|
| 1 | Working Current | 100mA@36V |
4. GPS Module Specification:
| No. | Item | Specification |
|---|---|---|
| 1 | Receive Bands | GPS/QZSSL1C/AL5C BDSB1lB2a GLONASSL1OF |
Product Usage Instructions:
Installation:
The product should be installed using 2-M6 screws as per the
specified dimensions of 157.1*42.5*71mm.
Power Supply:
The input voltage range is from 24V to 100V. Ensure the working
current does not exceed 100mA at 36V.
Waterproofing:
The product is IPX7 waterproof rated due to the PCBA glue
filling process. It can withstand exposure to water up to a certain
depth.
Communication Interface:
The product supports URAT and CAN communication interfaces for
connecting with vehicles and other systems.
Frequently Asked Questions (FAQ):
Q: Is the product suitable for use in extreme
temperatures?
A: The product has a working temperature range of -20°C to +65°C
and a storage temperature range of -40°C to +80°C, making it
suitable for various environments.
Q: What is the weight of the product?
A: The net weight of the product is approximately 260g, making
it lightweight and portable.
“`
Shenzhen Omni Intelligent Technology Co., Ltd
G3S-KS-OM-NA-P-B G3S-KS-OM-NA-L
Specification
Product model: G3S-KS-OM-NA-P-B G3S-KS-OM-NA-L
Version: Version0.1 Manufacturer: Shenzhen Omni Intelligent Technology Co., LTD
Address: 11th floor, Lianchuang Science Building, Technology Bulan Road, Nanwan Street, Longgang District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-211,-
Website: www.omnisharing.cn
Shenzhen Omni Intelligent Technology Co., Ltd
1.Product Description
G3S-KS-OM-NA-P-B and G3S-KS-OM-NA-L is a customized IOT for scooters, Ebike and other models. Product shape design idea is semi-embedded assembly, small exposed volume, simple, beautiful, solid and reliable. With BLE, Voice notification, 4G, GPS,and other functions. Among them, the communication mode between vehicles and IOT include URAT and CAN, which can be selected in different versions.
2. Product Features
IPX 7 waterproof Dual-frequency and multi-mode and high-precision positioning BLE 5.2 4G LTE-Cat1 Clear Voice Notification Wide Working Voltage URAT communication / CAN communication Semi-embedded assembly method, robust and reliable The PCBA glue filling process Compact size
Address: 11th floor, Lianchuang Road, Nanwan Street, Longgang
Science Building, Technology District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-221,-
Bulan
Website: www.omnisharing.cn
Shenzhen Omni Intelligent Technology Co., Ltd
3. Technical Parameter
No.
Item
1
working current
2
input voltage
3
Back-up Battery
4
Serial port baud rate
5
Working temperature
6
Storage temperature
7
Waterproof
8
Communication Interface
9
Audio frequency
10
BLE Version
11
Voice
12
SIM Card
13
Case material
14
Installation
15
Product Dimension
16
Net weight
Basic Information Specification 100mA@36V 24-100 V
1800 mAh (18650 lithium battery) 115200
-20 ~+65 -40 ~+80
IPX 7 (PCBA glue filling process)
TTL Serial Port / CAN Bus 24bit, 8 96 Kbps frequency, 82dB SNR
BLE5.2 Class D power amplifier, 4 2W horn
Micro Sim3FF PCFR6005+
2-M6 screws 157.1*42.5*71mm
About 260g
Address: 11th floor, Lianchuang Road, Nanwan Street, Longgang
Science Building, Technology District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-231,-
Bulan
Website: www.omnisharing.cn
Shenzhen Omni Intelligent Technology Co., Ltd
GPS module Specification
No.
Item
Specification
GPS/QZSSL1C/AL5C
1
Receive Bands
BDSB1lB2a GLONASSL1OF
2
Receive Sensitivity
GalileoE1E5a
Cold start-up: -148 dBm Hot start-up: -155 dBm
Recatch: -158 dBm
3
Position Precision
<=2M(open sky)
4
Starting Time
Cold start: <35s Temperature start: <30s
Hot start: <2s
5
Antenna
Built-in dual-frequency ceramic antenna 25*25*4mm/18*18*4 mm
No.
Item
1
Bluetooth version
2
Max Transmitted Power
3
Receiving sensitivity
4
Frequency
5
Antenna
Bluetooth Information Specification BLE5.2 +10 dBm
-98 dBm 2.4Ghz Onboard Antenna
Address: 11th floor, Lianchuang Road, Nanwan Street, Longgang
Science Building, Technology District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-241,-
Bulan
Website: www.omnisharing.cn
Shenzhen Omni Intelligent Technology Co., Ltd
(European version) Communication module specification (CAT 1)
No.
Item
Specification
1
4G Band
FDD-LTE B1/B3/B5/B7/B8/B20
2
2G Band
GSM 900/1800MHz
(Australian version) Communication module specification (CAT 1)
No.
Item
Specification
1
4G Band
FDD-LTE B1/B2/B3/B4/B5/B7/B8/B28/B66
2
2G Band
GSM 850/900/1800/1900MHz
(North American Edition) Communication Module Specification (CAT 1)
No.
Item
Specification
1
4G Band
FDD-LTE B2/ B4/B12
2
3G Band
WCDMA B2/B5
(China version) Communication module specification (CAT 1)
No.
Item
Specification
1
4G Band
LTE-FDD B1/B3/B5/B8 LTE-TDD B34/B38/B39/B40/B41
(Korean version) Communication module specification (CAT M)
No.
Item
Specification
1
CAT-M frequency
range
B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27 /B28/B66/B85
Address: 11th floor, Lianchuang Road, Nanwan Street, Longgang
Science Building, Technology District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-251,-
Bulan
Website: www.omnisharing.cn
Shenzhen Omni Intelligent Technology Co., Ltd
Accelerometer
No.
Item
Specification
1
Specification
2
Acceleration value range
3
Posture detection
The 3-axis acceleration sensor ±2G/±4G/±8G/±16G
Fall detection, vibration detection, roll detection
No.
Item
1
Core
2
Frequency
3
Flash
4
RAM
MCU characteristic Specification
ARM Crotex M4 144 MHz 256 KB 32 KB
4. Other Technical Parameters
(1) Charging management Integrated dynamic power path management, no backup battery when there is external power supply. When the external power supply is cut off, automatically switch to the backup battery power supply. Support the maximum charging current of 0.2A Support battery short-circuit protection and chip overheating protection Support for rechargeable battery temperature detection (2) Power interface Wide voltage input range 24-72V DC, maximum voltage 100V short-circuit protection Soft start (3) Serial port communication interface Support 9600,115200 (default) port rate
Address: 11th floor, Lianchuang Road, Nanwan Street, Longgang
Science Building, Technology District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-261,-
Bulan
Website: www.omnisharing.cn
Shenzhen Omni Intelligent Technology Co., Ltd
Built-in level conversion circuit, compatible with 3.3V and 5V level (4) Power to enable the ON / OFF control feet Control the power supply of the vehicle controller, and the internal Open Drain open and leakage output mode (5) Flash Built-in 64M Bit SPI Flash, used to store local electronic fence data, Log data, upgrade files, location data, etc.
5. Product display
Address: 11th floor, Lianchuang Road, Nanwan Street, Longgang
Science Building, Technology District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-271,-
Bulan
Website: www.omnisharing.cn
Shenzhen Omni Intelligent Technology Co., Ltd
Installation instructions: The horn hole of G3SG IOT is facing downwards, connect the cable, and it is embedded in the vehicle tube. The back is locked to the tube with 2 M6 screws to complete the installation.
Address: 11th floor, Lianchuang Road, Nanwan Street, Longgang
Science Building, Technology District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-281,-
Bulan
Website: www.omnisharing.cn
Shenzhen Omni Intelligent Technology Co., Ltd
Picture of PCB glue perfusion
6. Communication Interface Definition
Note: The TX and the RX are described for the IOT
Note: The CAN-H and CAN-L are described for the IOTs
7. Certification Statement
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
Address: 11th floor, Lianchuang Road, Nanwan Street, Longgang
Science Building, Technology District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-291,-
Bulan
Website: www.omnisharing.cn
Shenzhen Omni Intelligent Technology Co., Ltd
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Notice: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the
device. Cetappareilestconforme à la norme RSS d’Industrie Canada. Sonfonctionnementestsujet aux deux conditions suivantes: (1) ledispositif ne doit pas produire de brouillagepréjudiciable, et (2) cedispositifdoit accepter tout brouillagereçu, y compris un brouillage susceptible de provoquer un fonctionnementindésirable.
ISED RF Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Address: 11th floor, Lianchuang Road, Nanwan Street, Longgang
Science Building, Technology District, Shenzhen
Park,
Phase
3,
Lianchuang
Science,
No.-2110,
B- ulan
Website: www.omnisharing.cn
Documents / Resources
 |
Omni NEB3I0T IoT Device [pdf] Instruction Manual G3S-KS-OM-NA-P-B, G3S-KS-OM-NA-L, NEB3I0T IoT Device, NEB3I0T, IoT Device, Device |