RBWS1537C Angular Pouring Basin Top Fill
“
Specifications
- Catalog Number: RBWS1537C
- Material: Heat-resistant graphite
- Compatibility: T-Series and B-Series horizontal top fill
sleeves
Product Information
The RBWS1537C top fill pouring basin is designed for angular
installations where clearances allow. Its compact size facilitates
optimal flow of filler material. Made from durable heat-resistant
graphite, this pouring basin is reusable and long-lasting.
Product Usage Instructions
Installation
- Ensure the installation area meets the clearance requirements
for the top fill pouring basin. - Use with RBM2660 pouring basin frame (sold separately).
- Refer to nVent LENTON Cadweld Rebar Splicing System Instruction
Manual for detailed installation instructions.
Maintenance
Regularly inspect the pouring basin for any damage or wear.
Clean as needed to maintain optimal performance.
Compatibility
Designed specifically for use with T-Series and B-Series
horizontal top fill sleeves. Ensure proper compatibility before
use.
FAQ
Q: Can I use the RBWS1537C pouring basin without the RBM2660
pouring basin frame?
A: No, the RBWS1537C pouring basin requires the RBM2660 pouring
basin frame for proper installation and functionality.
Q: Where can I find additional sizes of the RBWS1537C pouring
basin?
A: Sizes not shown may be available by special order. Please
contact your nVent LENTON representative for more information on
availability.
Q: Are there any safety precautions I should be aware of when
using the RBWS1537C pouring basin?
A: Prior to installation, read and understand all detailed
instructions and safety notices provided in the nVent LENTON
Cadweld Rebar Splicing System Instruction Manual to ensure safe
usage.
“`
We connect and protect
Angular Pouring Basin, Top Fill, 45°, 1.88″ dia
CATALOG NUMBER
RBWS1537C
Top fill pouring basins should be used on angular installations whenever the clearances of the structure allow. The compact size of the top fill pouring basins help ensure the best possible flow of filler material.
FEATURES
Made from heat-resistant graphite Durable, re-usable and long lasting Designed for use with T-Series and B-Series horizontal top fill sleeves
PRODUCT ATTRIBUTES
Material: Graphite Diameter (Ø): 1.88″ Length 1 (L1): 6.38″ Length 2 (L2): 0.56″ Width (W): 3″ Height 1 (H1): 0.38 Height 2 (H2): 3 1/2″ Angle (a): 45 ° Unit Weight: 9 lb
ADDITIONAL PRODUCT DETAILS
RBWS1537 pouring basins require one RBM2660 pouring basin frame (sold separately).
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America +1.800.753.9221 Option 1 Customer Care Option 2 Technical Support
Europe Netherlands: +31 800-0200135 France: +33 800 901 793
Europe Germany: 800 1890272 Other Countries: +31 13 5835404
APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
CADDY ERICO HOFFMAN
ILSCO
SCHROFF
TRACHTE
©2025 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
This document is system-generated.
| nVent.com/LENTON 2
Documents / Resources
 |
nVent RBWS1537C Angular Pouring Basin Top Fill [pdf] User Guide RBWS1537C, RBM2660, RBWS1537C Angular Pouring Basin Top Fill, RBWS1537C, Angular Pouring Basin Top Fill, Basin Top Fill, Top Fill |