nvent LENTON

Angular Pouring Basin, Top Fill, 45°, 1.88" dia

CATALOG NUMBER

RBWS1537C

Top fill pouring basins should be used on angular installations whenever the clearances of the structure allow. The compact size of the top fill pouring basins help ensure the best possible flow of filler material.

FEATURES

Made from heat-resistant graphite
Durable, re-usable and long lasting
Designed for use with T-Series and B-Series horizontal top fill sleeves

PRODUCT ATTRIBUTES

Material: Graphite
Diameter (Ø): 1.88"
Length 1 (L1): 6.38"
Length 2 (L2): 0.56"
Width (W): 3"
Height 1 (H1): 0.38"
Height 2 (H2): 3 1/2"
Angle (a): 45°
Unit Weight: 9 lb

ADDITIONAL PRODUCT DETAILS

RBWS1537 pouring basins require one RBM2660 pouring basin frame (sold separately).

Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.

Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.

DIAGRAMS

Diagram showing dimensions: L2, H1, a, H2, W, L1. A circular opening is at the top, leading to a tapered body.

WARNING

nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

Contact Information

North America
+1.800.753.9221
Option 1 - Customer Care
Option 2 - Technical Support

Europe
Netherlands: +31 800-0200135
France: +33 800 901 793

Europe
Germany: 800 1890272
Other Countries: +31 13 5835404

APAC
Shanghai: +86 21 2412 1618/19
Sydney: +61 2 9751 8500

Our powerful portfolio of brands:

nvent CADDY ERICO HOFFMAN ILSCO SCHROFF TRACHTE

©2025 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.

This document is system-generated.

nVent.com/LENTON | 2

	nVent LENTON Angular Pouring Basin, Side Fill, 45°, Left Hand Information on the nVent LENTON Angular Pouring Basin, Side Fill, 45°, Left Hand, including features, specifications, and additional product details. This basin is made from heat-resistant graphite and is designed for use with T-Series and B-Series horizontal side fill sleeves.
	nVent LENTON Angular Pouring Basin, Top Fill, 30°, 2.5" Dia - Product Information Detailed information on the nVent LENTON Angular Pouring Basin, Top Fill, 30°, 2.5" diameter (RBWS2223F). Features include heat-resistant graphite construction, durability, and suitability for T-Series and B-Series horizontal top fill sleeves. Learn about product attributes, dimensions, and installation requirements.
	nVent LENTON Angular Pouring Basin, Top Fill, 15°, 64 mm dia - Product Information Detailed information about the nVent LENTON Angular Pouring Basin, Top Fill, 15°, 64 mm dia, including features, product attributes, and installation guidance.
	nVent LENTON Angular Pouring Basin, Top Fill, 15°, 64 mm dia - Product Information Detailed product information for the nVent LENTON Angular Pouring Basin, Top Fill, 15°, 64 mm dia. Includes features, product attributes, and installation guidance.
	nVent LENTON Horizontal Pouring Basin, Top Fill, Extended, 48 mm dia - Product Details Detailed information on the nVent LENTON RBHA9740C Horizontal Pouring Basin, Top Fill, Extended, 48 mm dia. Features, specifications, and usage instructions for this heat-resistant graphite product.
	nVent LENTON RBTSA9040F Horizontal Pouring Basin - Specifications and Details Detailed specifications for the nVent LENTON RBTSA9040F Horizontal Pouring Basin, made from heat-resistant graphite, designed for top-fill rebar splicing applications. Includes dimensions, material properties, and contact information.
	nVent LENTON Angular Pouring Basin, Top Fill, 30°, 2.5" dia - Product Information Detailed information on the nVent LENTON Angular Pouring Basin, Top Fill, 30°, 2.5" diameter. Includes features, product attributes, and additional details for installation and use.
	nVent LENTON Pouring Basin Crucible 152 mm dia - Product Information Detailed product information for the nVent LENTON Pouring Basin Crucible, 152 mm diameter. Includes features, material specifications, and important safety warnings.