RBM2974100U LENTON End Alignment Fitting
“
Product Specifications:
- Catalog Number: RBM2974100U
- End Alignment Fitting: 20 mm, #6, 20M
- Dimensions: 2.75 diameter 1, 1.4 diameter 2
Product Information:
End alignment fittings are designed to properly locate the
sleeve onto the reinforcing steel, retain packing materials
securely, and ensure a leak-free installation. They are durable,
re-usable, and long-lasting with a split-collar design for easy
installation and removal.
Product Usage Instructions:
Installation:
- Ensure you have the appropriate sleeve for your project.
- Place the end alignment fitting over the reinforcing
steel. - Align the sleeve with the fitting ensuring a proper fit.
- Securely tighten the fitting to hold the sleeve in place.
Removal:
- Loosen the end alignment fitting to release the sleeve.
- Gently remove the sleeve from the reinforcing steel.
Safety Precautions:
Before installation, carefully read and understand all detailed
instructions and safety notices provided in the nVent LENTON
Cadweld Rebar Splicing System Instruction Manual to prevent any
accidents or injuries.
FAQ:
Q: Can I use these end alignment fittings for all sleeve
sizes?
A: Diameter 2 of the fitting is specifically designed to match
the outside diameter of the appropriate sleeve. Sizes not shown may
be available by special order; contact your nVent LENTON
representative for more information.
Q: How do I obtain additional product details?
A: You can refer to nVent’s product instruction sheets available
at www.nvent.com or contact your nVent customer service
representative for further assistance.
“`
We connect and protect
End Alignment Fitting, 20 mm, #6, 20M, 2.75″ dia 1, 1.4″ dia 2
CATALOG NUMBER
RBM2974100U
End alignment fittings properly locate the sleeve onto the reinforcing steel. The fittings also retain the packing materials and hold them in place, which helps ensure a leakfree installation.
FEATURES
Durable, re-usable and long lasting Easily replaced if damaged Split-collar design allows for easy installation and removal
PRODUCT ATTRIBUTES
Material: Steel Rebar Size, US: #6 Rebar Size, Canada: 20M Height (H): 2 1/2″ Diameter 1 (Ø1): 2 3/4″ Diameter 2 (Ø2): 1.4″
ADDITIONAL PRODUCT DETAILS
Diameter 2 is the mating surface for the outside diameter of the appropriate sleeve. Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual. Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America +1.800.753.9221 Option 1 Customer Care Option 2 Technical Support
Europe Netherlands: +31 800-0200135 France: +33 800 901 793
Europe Germany: 800 1890272 Other Countries: +31 13 5835404
APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
CADDY ERICO HOFFMAN
ILSCO
SCHROFF
TRACHTE
©2025 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
This document is system-generated.
| nVent.com/LENTON 2
Documents / Resources
 |
nVent RBM2974100U LENTON End Alignment Fitting [pdf] Owner's Manual RBM2974100U, RBM2974100U LENTON End Alignment Fitting, LENTON End Alignment Fitting, End Alignment Fitting, Alignment Fitting |
 |
nVent RBM2974100U LENTON End Alignment Fitting [pdf] Owner's Manual RBM2974100U LENTON End Alignment Fitting, RBM2974100U, LENTON End Alignment Fitting, End Alignment Fitting, Alignment Fitting |
 |
nVent RBM2974100U LENTON End Alignment Fitting [pdf] Owner's Manual RBM2974100U, RBM2974100U LENTON End Alignment Fitting, LENTON End Alignment Fitting, End Alignment Fitting, Alignment Fitting |