nVent LENTON End Alignment Fitting

Model: RBM2974100U

Description: End alignment fittings properly locate the sleeve onto the reinforcing steel. The fittings also retain the packing materials and hold them in place, which helps ensure a leak-free installation.

Features

Durable, re-usable and long lasting
Easily replaced if damaged
Split-collar design allows for easy installation and removal

Product Attributes

Material: Steel
Rebar Size, US: #6
Rebar Size, Canada: 20M
Height (H): 2 1/2"
Diameter 1 (Ø1): 2 3/4"
Diameter 2 (Ø2): 1.4"

Additional Product Details

Diameter 2 is the mating surface for the outside diameter of the appropriate sleeve.

Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.

Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.

Diagrams

The fitting has a main body with two connection points labeled Ø1 and Ø2. A height dimension 'H' is indicated. An exploded view shows the fitting with a split collar design.

Warning

nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

Contact Information

North America: +1.800.753.9221

Europe (Netherlands): +31 800-0200135

Europe (France): +33 800 901 793

Europe (Germany): 800 1890272

Other European Countries: +31 13 5835404

APAC (Shanghai): +86 21 2412 1618/19

APAC (Sydney): +61 2 9751 8500

nVent Brands

nVent is a portfolio of leading brands including CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF, and TRACHTΕ.

	nVent LENTON End Alignment Fitting: Specifications and Usage Detailed information on the nVent LENTON End Alignment Fitting, including features, product attributes, and installation guidance. Covers 20 mm, #6, 20M, 2.75" dia 1, and 1.4" dia 2 sizes.
	nVent LENTON End Alignment Fitting: Specifications and Usage Detailed information on the nVent LENTON End Alignment Fitting, including features, product attributes, and installation guidance. Covers specifications for 20 mm, #6, 20M, 2.75" dia 1, and 1.4" dia 2.
	nVent LENTON Crucible Extension 97 mm Dia - Product Information Discover the nVent LENTON Crucible Extension, a 97 mm diameter steel tube designed to enhance graphite crucibles. Learn about its features, product attributes, and installation guidelines.
	nVent LENTON Crucible Cover, 10.32" - Product Information Details on the nVent LENTON Crucible Cover, 10.32", including features, product attributes, and installation guidance.
	nVent LENTON Crucible Cover, 10.32" - Product Information Details on the nVent LENTON Crucible Cover, 10.32", including its features, product attributes, and application. Made from heat-resistant graphite, it protects operators from heat and sparks.
	nVent LENTON Pouring Basin Crucible 152 mm dia - Product Information Detailed product information for the nVent LENTON Pouring Basin Crucible, 152 mm diameter. Includes features, material specifications, and important safety warnings.
	nVent LENTON Angular Pouring Basin, Top Fill, 15°, 64 mm dia - Product Information Detailed product information for the nVent LENTON Angular Pouring Basin, Top Fill, 15°, 64 mm dia. Includes features, product attributes, and installation guidance.
	nVent LENTON T-Series Horizontal Installation Equipment - Product Overview Detailed overview of the nVent LENTON T-Series Horizontal Installation Equipment, including catalog number, features, product attributes, and additional product details. This equipment simplifies ordering and ensures proper sizing of components for rebar splicing.