nvent Elexant 4010i Replacement Control Module
nVent RAYCHEM ELEXANT 4010i-MOD is a replacement module for the Elexant 4010i heat tracing controller.
FEATURES
- Simple to install
- Reliable during long life: 2 year product warranty available
SPECIFICATIONS
|
Catalo g Numb er |
Item Nam e |
Op era tin g Te mp era tur e |
Relative Humidity |
Control Relay Type |
Control Max Voltage |
Control Max Current |
Control Algorithms |
Tem pera ture Cont rol Ran ge |
Tem pera ture Alar m |
Gr ou nd Fa ult Ala rm |
Cu rre nt Ala rm |
Vol tag e Ala rm |
Aut oc ycl e |
Max Pow er Sup ply Inpu t Wire Size |
|
|
4010i- MOD |
−40 to 60 °C |
0% to 90%, Noncondensating |
Double- Pole, Solid- State, Double- Pole, Mechanical |
277 VAC Nominal, 50/60Hz |
32A @
40°C, De- Rated to 24A @ 50°C and Further De- Rated to 16A @ 60°C |
On/Off, Proportional, PASC, Always On, Always Off |
−200 to 700 °C |
−200 to 700 °C |
10 – 500 mA |
0.1 – 100 A |
80 – 300 V |
1 – 750 h |
16.8 mm² |
|
|
4010i- MOD- IS |
−40 to 60 °C |
0% to 90%, Noncondensating |
Double- Pole, Solid- State, Double- Pole, Mechanical |
277 VAC Nominal, 50/60Hz |
32A @
40°C, De- Rated to 24A @ 50°C and Further De- Rated to 16A @ 60°C |
On/Off, Proportional, PASC, Always On, Always Off |
−200 to 700 °C |
−200 to 700 °C |
10 – 500 mA |
0.1 – 100 A |
80 – 300 V |
1 – 750 h |
16.8 mm² |
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
Tel +1.800.545.6258 Fax +1.800.527.5703 thermal.info@nvent.com
Europe, Middle East, Africa
Tel +32.16.213.511
Fax +32.16.213.604 thermal.info@nvent.com
Asia Pacific
Tel +86.21.2412.1688
Fax +86.21.5426.3167
cn.thermal.info@nvent.com
Latin America
Tel +1.713.868.4800 Fax +1.713.868.2333 thermal.info@nvent.com
© 2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
Documents / Resources
 |
nvent Elexant 4010i Replacement Control Module [pdf] Instructions Elexant 4010i Replacement Control Module, Elexant 4010i, Replacement Control Module, Control Module, Module |
