nVent LENTON T Series Vertical Splice Kit Owner's Manual
Material number
RBT1091
T-Series splice kits contain the following: Sleeve, filler material kit (filler material, packing, pouring basin ceramic insert and disk, pouring basin ceramic guide tube), pouring basin and pouring basin crucible. Splice kits are ordered based on the quantity of splices needed. Sleeves and filler material kits are one-time use parts. Pouring basins and crucibles are prorated based on their anticipated life. Ordering splice kits simplifies ordering, reduces order errors and helps ensure proper sizing of components. Kits can be ordered with longer (extended) sleeves for use when the reinforcing steel deformation pattern or spacing does not meet the minimum product specifications.
Function
Simplifies ordering
Used to splice the same diameter bars
Available with extended sleeve lengths
Product Attributes
Sleeve: Standard Length
Rebar Size, Metric: 32 mm
Rebar Size, US: #10
Length 1 (L1): 362 mm
Length 2 (L2): 51 mm
Height 1 (H1): 660mm
Height 2 (H2): 451mm
Height 3 (H3): 210mm
Height 4 (H4): 197mm
Diameter (Ø): 127 mm
ADDITIONAL PRODUCT DETAILS
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System instruction manual.
All dimensions are for reference only.
Components can also be purchased separately: (1) Sleeve, (2) Filler Material Kit (filler material, packing, pouring basin ceramic insert and disk, pouring basin ceramic guide tube), (3) Pouring Basin, and (4) Pouring Basin Crucible.
Chart
Warn
nVent products should be installed and used only in accordance with nVent product instructions and training materials. Instructions are available at www.nvent.com or from your nVent customer service representative. Improper installation, improper use, abuse, or failure to fully comply with nVent instructions and warnings may result in product failure, property damage, serious personal injury or death, and/or void the warranty.
North America
+1.800.753.9221 Option 1 Customer Care Option 2 Technical Support
Europe
Netherlands: +31 800-0200135 France: +33 800 901 793
Europe
Germany: 800 1890272 Other Countries: +31 13 5835404
APAC
Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
CADDY ERICO HOFFMAN ILSCO SCHROFF TRACHTE
©2025 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
This document is system-generated.
Documents / Resources
 |
nVent LENTON T Series Vertical Splice Kit [pdf] Owner's Manual RBT1091, T Series Vertical Splice Kit, T Series, Vertical Splice Kit, Splice Kit, Kit |