Nuvance CR1001F Digital Projection Alarm Clock Instruction Manual

To activate the projection feature, press and hold the projection button for a few seconds to switch and rotate the projection content by 180 degrees.

Environmental Notice & Recycling Information

This product is recyclable. Please dispose of it according to local recycling regulations.

INTRODUCTION

Product

Read the instructions before use.

Start your day in style and convenience with our digital alarm clock with projection function.
Designed for effortless morning routines, it offers a clear projection of time on the ceiling or wall, convenient USB charging options for your devices, and dual alarms for two wake-up times.

With a snooze function for extra time in bed and a stylish design that fits in any bedroom, every morning will be an elegant start.

Overview

Snooze icon
Temperature max

Temperature min
Temperature display

Time display
Alarm clock 1 icon
Alarm Clock 2 icon
Snooze/light button
Projection port
Compartment
Adjustment knobs
Alarm 1
Alarm 2
DC power input
USB output

First use

Remove the insulation sheet from the battery.
The battery is a 3V CR2032 battery, and this battery has a memory function.
When you connect the alarm clock to the power adapter, all icons on the LCD screen will light up for 5 seconds, and you will hear a beep.
The alarm clock will display the default switch-on time “0:00”.

Time and general settings

Press and hold the clock icon on the back for more than 2 seconds to enter the time setting mode. When ”24H” flashes on the screen, use the (+) or (-) button to select the 12H or 24H time format.

Press the clock icon to confirm the current setting and move to the next setting. Then use the (+) or (-) button again.

Remark

The order of the settings is as follows:

Time format 12H or 24H, Hour setting, Minute setting, Temperature unit °C or °F.
Press and hold the (+) or (-) key to speed up the setting.
If you do not press the button for more than 15 seconds, the settings will be automatically saved, and the time setting mode will exit.

Set daily alarms

Use the 2 alarm switches on the back of the alarm clock to turn the alarm on or off. When the alarm is on, you will see an alarm icon on the display with a 1 or 2 on it.
Press and hold the alarm icon on the back for more than 2 seconds to set alarm 1. The default alarm is set to ”6:00”. Use (+) or (-) to set the hour.

Press the alarm icon again to set the minutes.
Press the alarm icon again to go to alarm 1’s snooze time.

Remark

The order of the alarm settings is as follows:

Alarm 1 hour, Alarm 1 minute, Alarm 1 snooze time, Alarm 2 hours, Alarm 2 minute, Alarm 2 snooze time.
The adjustable range of the snooze time is 5 to 60 minutes, but it can also be turned off. If you set the key to OFF, it means that there is no sleep function.

Turn off the alarm sound

When the set alarm time has elapsed, the alarm clock will sound an alarm. The alarm symbol with 1 or 2 ﬂashes on the display.
Press any button except the ﬁnger symbol on the top of the alarm clock to stop the alarm. The alarm symbol will stop ﬂashing automatically.

The alarm will stop automatically after 2 minutes without any operation.

Snooze function

When the set alarm time expires, the product will sound an alarm, and the alarm symbol will ﬂash on the display. Press the ﬁnger symbol to stop the beeping and enter hibernation mode.
A snooze symbol will ﬂash and be indicated by ”zz. The alarm clock will beep again when the set snooze time has elapsed.

The snooze time is set in the alarm time setting. When set to “OFF”, pressing the ﬁnger symbol does not have a snooze function.

Projection function

When the product is powered by the power cable, the projection is on by default.

In normal mode, short-press the ON/OFF button to turn the projection on or off.
Press and hold the ON/OFF button for more than 2 seconds to switch the projection content and rotate it 180 degrees.
When the projection is activated, the projection distance is approximately 2 to 4 meters.

Temperature display

In standard mode, short-press the (+) button once to see the maximum temperature, and short-press the button again to see the minimum temperature.
Press and hold the (+) button for 2 seconds to clear the current maximum/minimum temperature.

Backlight

When the product’s power supply is powered by direct current, the default setting is the brightest.

The backlight brightness has a total of 4 levels. Press the key once to switch between L01 ➔ L02 ➔ L03 ➔ OFF or L AU auto-brightness mode.
In the L AU mode, the brightness will automatically switch to high light from 6:00 to 17:59, and medium brightness from 18:00 to 5:59.
But it will switch to the darkest level at any time when it detects that the ambient light is dark enough.

Notice

Environment & Recycling

Mobius Loop

This product (or its packaging) is recyclable.

Throw it away according to the local recycling regulations.

Triman logo

This product (or its packaging) is covered by a separate collection. Follow the local recycling requirements for correct Waste management.

Green dot

The Green Dot indicates that the manufacturer contributes financially to a system for the collection, sorting and recycling of Packaging waste. Check the local recycling guidelines for the correct Waste management.

WEEE logo

This product is marked with the WEEE symbol and should not be used with the usual household waste. Liver disposal at an approved collection point for the recycling of electrical and electronic equipment.

RIC Code

This product or its packaging is made of recyclable paper. Sort this material according to local recycling regulations for paper and cardboard. Do not throw it in the residual waste, but hand it in at the appropriate collection points.

European directives

CE marking on this product indicates that it complies with the relevant European
Directives. Learn more about compliance, and Technical documentation is available on request.

RoHS

This product complies with the European RoHS Directive, which restricts the use of hazardous substances in electrical and electronic devices.
This contributes to more environmentally friendly and safer processing after use.

Disclaimer

By using this manual, you consent to this disclaimer. TLS Commerce B.V. strives to provide complete, accurate and up-to-date information in the manual and on the accompanying web pages.
If you have any questions or have incorrect information, please contact the customer service of TLS Commerce B.V. All information is intended for personal use.
TLS Commerce B.V. is not responsible for damage caused by use, incompleteness or inaccuracy of the information in the event of careless use. The information is subject to change without prior notice.

Frequently Asked Questions

How do I turn off the snooze function?

You can disable the snooze function by setting the switch to OFF.

How do I stop the alarm sound?

When the alarm sounds, press the snooze/light button to silence it and enter snooze mode.

What does the flashing alarm symbol mean?

The flashing alarm symbol indicates that the alarm is activated.

Documents / Resources

Nuvance CR1001F Digital Projection Alarm Clock [pdf] Instruction Manual
CR1001F Digital Projection Alarm Clock, CR1001F, Digital Projection Alarm Clock, Projection Alarm Clock, Alarm Clock

References

User Manual

Nuvance CR1001F Digital Projection Alarm Clock

Product Usage Instructions