Nuvance Digital Alarm Clock with Projection

Product Information

Start your day in style and convenience with our digital alarm clock with projection function. Designed for effortless morning routines, it offers clear projection of time on ceiling or wall, convenient USB charging options for your devices, and dual alarm for two wake-up times. With a snooze function for extra time in bed and a stylish design that fits in any bedroom, every morning will be an elegant start.

Overview

The alarm clock features a digital display showing time, temperature, and alarm icons. It also includes a projection port, adjustment knobs, and various input/output ports.

First Use

• Remove the insulation sheet from the battery. The battery is a 3V CR2032 and has a memory function.
• When connected to the power adapter, all LCD icons will light up for 5 seconds, followed by a beep. The default time displayed will be "0:00".

Time and General Settings

• Press and hold the clock icon on the back for over 2 seconds to enter time setting mode.
• When "24H" flashes, use the (+) or (-) buttons to select between 12H or 24H time format.
• Press the clock icon to confirm the current setting and move to the next. Use (+) or (-) buttons for adjustments.
• Settings order: Time format (12H/24H) → Hour setting → Minute setting → Temperature unit (°C/°F).
• Press and hold (+) or (-) to speed up setting.
• If no button is pressed for over 15 seconds, settings are saved automatically, and time setting mode exits.

Set Daily Alarms

• Use the 2 alarm switches on the back to turn alarms on or off. An alarm icon with '1' or '2' will appear on the display when active.
• Press and hold the alarm icon on the back for over 2 seconds to set Alarm 1. Default is "6:00". Use (+) or (-) to set the hour, then press the alarm icon again to set the minutes. Press again to set Alarm 1 snooze time.
• Alarm settings order: Alarm 1 hour → Alarm 1 minute → Alarm 1 snooze time → Alarm 2 hours → Alarm 2 minute → Alarm 2 snooze time.
• Snooze time is adjustable from 5 to 60 minutes, or can be turned OFF. Setting to OFF disables the snooze function.

Turn Off Alarm Sound

• When the alarm time elapses, the alarm will sound, and an alarm icon (1 or 2) will flash. Press any button except the finger symbol on top to stop the alarm. The alarm icon will stop flashing automatically.
• The alarm will automatically stop after 2 minutes of inactivity.

Snooze Function

• When the alarm time expires, the product sounds an alarm, and the alarm symbol flashes. Press the finger symbol to stop the beeping and enter hibernation mode. A snooze symbol with "zz" will flash. The alarm will beep again when the set snooze time has elapsed.
• Snooze time is set within the alarm time settings. If set to "OFF", pressing the finger symbol has no snooze function.

Projection Function

• When powered by the cable, projection is ON by default.
• In normal mode, short press the ON/OFF button to toggle projection ON or OFF.
• Press and hold the ON/OFF button for over 2 seconds to switch projection content and rotate it 180 degrees.
• When activated, the projection distance is approximately 2 to 4 meters.

Temperature Display

• In standard mode, short press the (+) button to view the maximum temperature, and again to view the minimum temperature.
• Press and hold the (+) button for 2 seconds to clear the current maximum/minimum temperature readings.

Backlight

• When powered by direct current, the default backlight setting is the brightest. There are 4 brightness levels. Short press the key to cycle through L01 → L02 → L03 → OFF or L AU auto-brightness mode.
• In L AU mode, brightness automatically switches to high from 6:00 to 17:59 and medium from 18:00 to 5:59. It will switch to the darkest level at any time if ambient light is detected as sufficiently dark.

Environment & Recycling

• Mobius Loop: This product (or packaging) is recyclable. Dispose of according to local recycling regulations.
• Triman logo: This product (or packaging) is covered by separate collection. Follow local recycling requirements for correct waste management.
• Green Dot: Indicates the manufacturer contributes financially to a system for collection, sorting, and recycling of packaging waste. Check local recycling guidelines.
• WEEE logo: Marked with the WEEE symbol, this product should not be disposed of with household waste. Deliver to an approved collection point for recycling of electrical and electronic equipment.
• RIC Code: This product or its packaging is made of recyclable paper. Sort according to local recycling regulations for paper and cardboard. Do not discard in residual waste; hand in at appropriate collection points.

European Directives

• CE marking: Indicates compliance with relevant European Directives. More information on compliance and technical documentation is available upon request.
• RoHS: Complies with the European RoHS Directive, restricting hazardous substances in electrical and electronic devices for more environmentally friendly and safer processing.

Disclaimer

By using this manual, you agree to this disclaimer. TLS Commerce B.V. strives to provide complete, accurate, and up-to-date information. For questions or incorrect information, contact TLS Commerce B.V. customer service. Information is for personal use only. TLS Commerce B.V. is not responsible for damages due to use, incompleteness, or inaccuracy from careless use. Information is subject to change without prior notice.

Company Information

TLS Commerce B.V. | Nuvance
Chamber of Commerce: 85524271
VAT no: NL863652591801
Graafschap Hornelaan 200
6004 HT Weert
Netherlands