Numark PT01 Power via Battery-AC Adapter

BOX CONTENTS

• PT01USB
• POWER ADAPTER
• USB CABLE
• SOFTWARE INSTALLATION CD
• PT01USB QUICKSTART MANUAL
• mixmeister VINYL CONVERTER SOFTWARE
• QUICKSTART GUIDE

INTRODUCTION

Welcome to the PT01USB portable, battery-powered turntable for DJs on the go. Whether digging for music at your favorite record shop, out camping with your friends or simply enjoying your records at home, the PT01USB delivers exceptional performance and crisp, clean sound through the onboard speaker. In addition, the PT01USB connects directly to your computer to turn your treasured vinyl recordings into digital music. We have included two software packages to aid you in converting your vinyl recordings:

• EZ Vinyl/Audio Converter is the quickest and easiest way to turn your recordings into digital media. EZ Vinyl/Audio Converter conveniently saves your recordings in your iTunes library. Novice users may find this application preferable. We have included a handy Quickstart Guide with step-by-step instructions on software installation and operation.
• Audacity is intended for the advanced user. This application allows for advanced audio editing and processing, such as normalization, noise removal, and automatic track separation. The Audacity Software
  Guide can be found on the included CDs – please refer to this guide as you are working with Audacity.
  To install the software: simply insert the included CD into your computer and follow the on-screen instructions. After you finish converting your vinyl, you can burn your recordings to CD or load them onto portable media devices.

CONNECTION DIAGRAM

1. Make sure all items listed on the front of this guide are included in the box.
2. READ THE SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. Study this setup diagram.
   Note: This turntable can be used as a standalone unit, as well as with the items listed in the quick setup diagram.
4. Make sure all devices are turned off and all faders and gain knobs  are set to “zero”
5. Connect all stereo input sources as indicated in the diagram.
6. Connect the stereo output devices to power amplifier(s), tape decks, and/or other audio sources.
7. Plug all devices into power.
8. Switch everything on in the following order.
   • Turntable
   • Mixer (not included)
   • last, any amplifiers or output devices (not included)
9. When turning off, always reverse this operation by,
   • turning off amplifiers (not included)
   • mixer (not included)
   • Turntable
10. Go to http://www.numark.com for product registration.
    More information about this product may be found at http://www.numark.com

PRODUCT FEATURES

1. Platter: Place your record on the platter.
2. Control Panel: Please see a detailed description of the control panel features below.
3. Onboard Speaker: This speaker outputs audio from the turntable.
4. Tone Arm Clip: Use this clip to secure the tonearm when storing and transporting the unit.
5. Tonearm: This unit comes with a ready-touse pre-balanced tonearm and cartridge. The cartridge is user-replaceable with parts from your distributor located in the warranty guide. Please note that the platter starts spinning once the tonearm is lifted over the record.
6.  45 Adapter: Use this adapter when playing 45 RPM records.
7. Dust Cover: This cover protects the turntable from dust and abuse while not in use or while in transport.
8. Dust Cover Latch: This latch holds the dustcover securely in place, and can easily be opened by sliding it to the left.
9. Handle: Use this handle to carry the unit.
10. Battery Cover: Holds the batteries securely in place during use and transport. It easily slides open and closed as indicated on the battery cover.
    NOTE: This unit uses 6 “D” cell batteries (not included).

OUTPUT PANEL FEATURES

1. Power Switch: Use this switch to turn power on and off.
2. AC In: If you would like to power the unit externally, plug the included power adapter into a power outlet, then turn on the unit.
   NOTE: This unit can also be powered by 6 “D” Cell batteries (Not Included).
3. Master Output (RCA): This line level output is for connecting the PT01USB to the input of an external audio device such as a DJ mixer, tape recorder, CD Burner, PA system, powered speaker, or a home stereo. The level of the master stereo output signal is controlled by the audio level control.
4. 1/8” Headphone Jack: Connect 1/8” headphonesto this audio output.
   Note: Make sure the volume control is set to the OFF position before plugging in any headphones to avoid permanent hearing damage.
5. 1/4” Headphone Jack: Connect ¼” headphones to this audio output.
   Note: Be sure the volume control is set to the OFF position before plugging in any headphones to avoid permanent hearing damage.
6. USB Audio Output: Use the included USB Cable to connect your turntable to your computer. Refer to the software instruction guide before plugging in your turntable. Please note that the turntable cannot be powered through the USB connection.
7. Gain: This knob can be used to adjust the gain level of the audio signal from the turntable. If the audio from the turntable is too quiet or too loud, use this knob to adjust the volume setting.
8. 1/8” Stereo Line Input: Connect Tape Players, Reel to Reel, or any other audio source here. This signal is sent to the computer through the USB connection. Make sure that your phono cartridge is installed while using this input for maximum sound quality. Also make sure that your RCA jacks are either plugged into an input device or not in contact with metal.
   Note: The 1/8″ audio input is not routed to the turntable’s RCA output jacks, only to your computer via USB.

CONTROL PANEL FEATURES

1. Audio Level Control: This rotary control adjusts the volume of the onboard speaker, headphone and line out outputs.
   NOTE: Make sure the Audio Level Control is set to OFF when connecting any alternate audio output devices.
2. Tone Control: This feature allows you to adjust the low and high frequency audio levels.
3. Pitch Control: This knob adjusts the pitch of the music +/- 10%. In the center position the pitch is at 0%.
4. RPM Selection Switch: This switch selects the RPM of the turntable platter — 33, 45, and 78 RPM. Please select the appropriate setting for the record you are playing; if the music comes out at a strange or unusual pitch, this may indicate that the wrong RPM setting is selected
5. Power LED: This LED remains lit while the unit is powered on. To avoid wasting battery power, make sure the power is off when storing or transporting the unit.

BATTERY INSTALLATION

This product can be powered by 6 “D” Cell batteries. They should be loaded as shown to the left, with the positive end toward the handle.

FAQS

VIDEO

References

• User Manual