nke WATTECO
Monit’O LoRaWAN Remote Monitoring
User Guide
Monit’O LoRaWAN Remote Monitoring
Start
Provision of the device on your LoRaWAN® network with the keys available on the secure platform.
ON
Video: ON – OFF
https://www.watteco.fr/assistance/tutoriels-video/
Connectors
The measurement from 0 – 70 Volts :
- Voltage up to 70V
- Accuracy +-70mV
- 1.5 m wire AWG 20-26
Measurement of 0 – 100 volts :
- Galvanically isolated input
- Accuracy +-1mV
- 1.5 m wire AWG 20-26
- Any voltage above 1V is destructive
Connectors
Digital input features :
- Tension : 0-30Vdc
- Delivered current: 3.5 µA
- Signal frequency max: 0-100 Hz
Installation Setting-up
Please note that after the installation of the RailDIN kit, the protection rating of the housing will change to IP50.
Radio propagation
Characteristics
| Reference | 50-70-017 | 50-70-189 | 50-70-141 |
| Class | A | A | A |
| Power Level | +14 dBm | +14 dBm | +14 dBm |
| Measures | 4-20 mA / 0-10 V | 4-20 mA / 0-10 V Input SO | 0-70V / 0-100mV |
| Antenna | Internal | External | External |
| Casing materials | ASA / PC | ASA / PC | ASA / PC |
| IP rating | I P55 | I P55 | I P55 |
 |
 |
| https://support.watteco.com/ | https://www.watteco.fr/assistance/centre-de-telechargement |
Watco represented by JC LE BLEIS declares that the radio equipment type 50-70-141/50-70-017/ 50-70-189 is in conformity with Directive 2014/53/EU (RED). The full text of the EU Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance/download-center/ 
Documents / Resources
 |
nke WATTECO Monit’O LoRaWAN Remote Monitoring [pdf] User Guide Monit O, Press O, Press O, LoRaWAN Remote Monitoring, Remote Monitoring, Monit O, Monitoring |
