Littelfuse RM1000 REMOTE INDICATION MONITORING
REMOTE INDICATION & MONITORING
|
IR Kit-36 (36″ long) Informer Fiber Optic Kit |
Use with the Informer. Simply attaches to the face of the unit to provide remote diagnostics without opening the panel. |
LSRX1 111-Insider-P 455 LSRX-C 231-Insider-P |
|
INFORMER-MS Remote diagnostic tool |
Hand-held diagnostic tool designed for use with the Littelfuse 455 series. The Informer-MS uses an infrared receiver to read valuable information transmitted from the 455, which can be helpful for troubleshooting the system
For full datasheet, see pg. 252 |
455 series |
|
OL-RESET Remote Reset Module |
Allows the 777 line of motor and pump relay products to be manually reset without opening the panel door. Simply
connect the module to the 777 communication port, connect a wire to each of the two applicable pins on the OL-RESET and to a normally-open push-button switch (sold separately). Mount the push-button switch in a convenient location. |
777 series |
| 777-MRSW
Manual Remote Reset Kit (24” long) |
Allows the 777 line of motor and pump relay products to be manually reset without opening the panel door. Simply
connect the 9-pin adapter to the 777 communication port and mount the push-button switch in a convenient location. |
777 series |
|
M500 Electronic Megohmmeter |
Automatic, portable, battery-powered insulation tester. This unit is specifically designed as an inexpensive alternative to costly swing needle megohmmeters. The M500 measures insulation resistance values of motors, generators and transformers up to 1000 megohms at 500 V ac, indicating the condition of insulation on the zone scale. Its compact design and ease of use makes the M500 a great diagnostic tool for motor rewind shops, electrical maintenance personnel and pump installers. |
|
Documents / Resources
 |
Littelfuse RM1000 REMOTE INDICATION MONITORING [pdf] User Manual RM1000 REMOTE INDICATION MONITORING, REMOTE INDICATION MONITORING, INDICATION MONITORING, RM1000-3R, RM1000 NEMA 4 |
