NITRO CONCEPTS IMMERSION Metahaptics 

NITRO CONCEPTS IMMERSION Metahaptics 

Books Content Books Content

  • Part-A: 1x
    Books Content
  • Part-B: 1x
    Books Content
  • Part-C: 1x
    Books Content
  • Part-D: 1x
    Books Content
  • Part-E: 2x
    Books Content
  • Part-F: 1x
    Books Content
  • Part-G: 1x
    Books Content
  • Part-H: 1x
    Books Content

Installation Instruction

Installation Instruction

Installation Instruction

Installation Instruction

Installation Instruction

Installation Instruction

Installation Instruction

Installation Instruction

Installation Instruction

Installation Instruction

IMPORTANT:
Failure to follow all instructions may result in injury, damage to the device, or voiding of the warranty.

GENERAL SAFETY

  • Only use the box as described in this manual.
  • Keep the box away from water and moisture.
  • Never open the box yourself for repairs.

ELECTRICAL SAFETY

  • Use only the cables recommended by the manufacturer.
  • Avoid short circuits by improper use of connectors.

CARE AND MAINTENANCE

  • Keep the cushion and PCB box dry. Use a soft, dry cloth for cleaning. Avoid aggressive cleaners that may damage surfaces.
  • Store the cushion at moderate temperatures (15°C – 30°C) to prevent damage from extreme heat, cold, and moisture.

SAFETY AND WARNINGS

  • Ensure the PCB box is mounted under the seat to prevent accidents.
  • Do not use the cushion if there are signs of overheating or malfunction. Do not open the PCB box or other system parts. For repairs, contact customer support at support@gamersware.com.
  • Do not use the device in direct sunlight. Maintain a safe distance from moving parts.
  • Do not use the haptic feedback seat if you are pregnant. Due to the permanent magnets, this product is not suitable for persons with pacemakers.
  • Warning: This product may contain small parts that pose a choking hazard. Keep children away.
  • Regularly check the product for safety and usability.

WARRANTY

  • The IMMERSION Metahaptics comes with a 12-month warranty from the date of purchase.
  • The warranty covers manufacturing and material defects.
  • Damage caused by improper use or unauthorized repairs is not covered by the warranty.

TECHNICAL SPECIFICATIONS

  • Input voltage: 19 V, 5.2 A
  • Output power: Up to 100 W

SERVICE

  • If you have any issues or questions, please contact Nitro Concepts customer service at support@gamersware.com

Customer Support

Pro Gamers ware GmbH
Gauss Strasse 1
10589 Berlin
Germany
info@nitro-concepts.com
www.nitro-concepts.com
Symbols
Points de collecte sur www.quefairedemesdechets.fr
Logo

Documents / Resources

NITRO CONCEPTS IMMERSION Metahaptics [pdf] Instruction Manual
IMMERSION Metahaptics, IMMERSION, Metahaptics

References

Leave a comment

Your email address will not be published. Required fields are marked *