NFC Aufsteller Medium NFC Display Owner’s Manual
The dimensions of the stand are 60 mm x 120 mm. The bottom edge (the hatched area in the template), which disappears into the wooden stand, is 15 mm.
Download the print template and open it in your editing program.
Now draw your design on the print template.
Please note the following points:
- Rasterize all text.
- Make sure the font isn‘t too small. Print the layout on your printer as a test.
- Send us a black and white file.
- Create the design, preferably as a vector graphic or alternatively as a high-resolution image (300 dpi).
- When you create a vector graphic, reduce the file to one single layer.
Side tips: You can, of course, also draw in the lower red-shaded area. You can also place internal information here, such as a numbering system or the name of the assigned colleague. Would you like a borderless, all-over design? Then draw 2 mm beyond the edges.
On the online shop‘s product page, enter your desired link and upload your design. Then, enter the desired quantity and complete your order.
After placing your order, we will send you an email with the digital proof within 24 hours. We will only start production after your approval.
Therefore, it is very important that you provide a valid email address where you can be easily reached.
Documents / Resources
 |
NFC Aufsteller Medium NFC Display [pdf] Owner's Manual Medium NFC Display, NFC Display, Display |
