Globehopper 3 Nexxiot Mounting App
Download App
Download the Nexxiot Mounting App on your smartphone:
Checklist of What You Need Before Starting:
- Always Ensure the Latest Version: Before proceeding, ensure you have the latest version of the Nexxiot Mounting App installed on your phone device.
- Understanding “Mounting”: In this context, “Mounting” refers to the process of digitally associating a Nexxiot device with an asset.
- Detailed Information and Installation Guidelines: For comprehensive information about the device and detailed installation instructions, please refer to the “Globehopper Crossmodal 3.0 User Manual.”
- For Support and Inquiries: If you need assistance or have any questions regarding device mounting, please contact us via email at support@nexxiot.com.
SET-UP
After downloading the Nexxiot Mounting App, log in using your Nexxiot credentials.
- Download the application
Download the application from the App Store (iOS) or Google Play Store (Android). - Open the application
Tap on the application to open it and wait for the home screen to appear. - Sign in
Enter your credentials and tap “Sign In.” If you are unsure about your credentials, please contact us.
A Globehopper must first be physically mounted to its asset:
- Wagon EVN: 11-digit number and 1 checksum.
- Tank container: 4 letters and 7 numbers
- Railcar: 3 letters and 5 numbers
Warning: For more flexibility in naming, go to Connect and select the asset type “Other” to remove space and dash.
Afterward, the digital mounting can be started using the Mounting App:
The NFC tag is located under the Nexxiot logo on the Globehopper.
- In the ‘Device’ tab, you can get a snapshot of a Globehopper by scanning its NFC chip.
- If you require instructions on how to mount a Globehopper to an asset, click on the wrench icon and refer to the user manual.
- Once you are ready, select the ‘Asset’ tab and add the asset ID.
- When a Globehopper has been scanned, it can be mounted.
- Ideally, select the option that best matches the placement of the Globehopper.
- “Permission denied” means you do not have the necessary rights to register the device. Email the support team at support@nexxiot.com, providing the email address used to log in and the device serial number.
As a Final Step, Take Photos of the Device Installed on Your Asset
- Photos
Take a first photo of the device’s location.
- Next, take a second photo showing the device’s serial number.
- Finally, capture the identifier of your asset.
- Make sure the photos are clear. Once you are finished, click on “Continue”.
- Placement
Select where the device has been placed.
- Follow up by clicking on “register mounting”.
- Upon clicking, you should see a final screen that confirms the mounting of your device.
- You can then proceed to click on “finish”.
Contact Details
- Switzerland
Prime Tower
Hardstrasse 201, 8005 Zürich Switzerland
+41 44 275 51 51 - Germany
Marktstrasse 32 – 34 65428 Rüsselsheim am Main, Germany
+41 44 275 51 51 - USA
6175 Main Street, Suite 250 Frisco, TX 75034
United States
+1 (214) 292 7784 - Email Us: support@nexxiot.com
Call Today +41 44 275 51 51
Doc. Nr: 20240228001
Version: 1.0
Status: Pending Approval
Classification: Internal
© 2024
Documents / Resources
 |
nexxiot Globehopper 3 Nexxiot Mounting App [pdf] User Guide Globehopper 3 Nexxiot Mounting App, Globehopper 3, Nexxiot Mounting App, Mounting App |