NEXT LEVEL GT Lite User Guide
We know you’re eager to start racing! Take your time with the instructions and follow this guide to assemble your product.
You’ll be setting yourself up for success with following the instruction booklet to fully optimize your product.
ASSEMBLY VIDEO
FOLLOW US
@next_level_racing
@nextlevelracingOfficial
@nextlvlracing
Next Level Racing
support@nextlevelracing.com
PRE-RACE CHECKS
WARNING
- Please do not use power tools for assembly as over tightening can damage your frame.
- Do not adjust the hubs while user is sitting in cockpit. Make sure user is out of the cockpit before adjusting.
- Make sure the hubs are tightened fully before using the cockpit. (spin the hub clockwise to ensure it is fully tight)
- Make sure strap on wheel bar is tight when adjusting the hubs otherwise the wheel will fall when hubs are open.
If you require any support with your product please contact our friendly team at: support@nextlevelracing.com
WARNING
CHOKING HAZARD – Small parts not for children under 3 years or any individuals who have a tendency to place inedible objects in their mouths.
IN THE BOX
- 8 X M6 15MM
- 8 X M6 WASHERS
- 4 X M6 NUTS
- 1 x M6 ALLEN KEY PHILLIPS HEAD
- 1 x M4 ALLEN KEY
- 1 X WRENCH
- 4 x M5 30MM
- 4 X M5 WASHERS
- 4 X M5 NUTS
START
ADJUSTMENTS
WARNING
- Do not use power tools for assembly as over tightening can damage your frame.
- Do not adjust the hubs while user is sitting in cockpit. Make sure user is out of the cockpit before adjusting
- Make sure the hubs are tightened fully before using the cockpit (spin the hub clockwise to ensure it is fully tight)
- Make sure strap on wheel bar is tight when adjusting the hubs otherwise the wheel will fall when hubs are open.
ASSISTANCE
If you require further support with your product please contact our friendly team at: support@nextlevelracing.com
Documents / Resources
 |
NEXT LEVEL GT Lite [pdf] User Guide NEXT LEVEL, GT Lite |
