Nero-logo

Nero NRFW006 Square Tile Insert Floor Waste

Nero-NRFW006-Square-Tile-Insert-Floor-Waste-product

Product Specifications

  • Product Name: 100mm Square Tile Insert Floor Waste
  • Outlet Size: 50mm
  • Material: 304 Stainless Steel
  • Live Load Bearing: 100KG

Product Usage Instructions

Installation

The installation of the 100mm Square Tile Insert Floor Waste with a 50mm outlet should be done in compliance with the National Construction Code Volume, Plumbing Code of Australia (PCA), associated reference standards, and WMTS040.

Floor Waste Width Spiggot Size:

  • 100mm
  • 50mm

Nominal OD Floor Waste Pipe: 50mm PVC

Notes:

  1. The nominal OD aligns with the floor waste pipe.

Steps:

  1. Cut the grate to suit the floor waste, leaving at least 3mm of clearance in overall length to allow for easy removal for cleaning.
  2. Install the floor waste according to the provided picture. It can be installed in two ways: tile insert placement and normal placement.

FAQ

  • Q: Can the floor waste be installed in other sizes?
    • A: The product is specifically designed for a 100mm square tile insert floor waste with a 50mm outlet. Other sizes may not be compatible.
  • Q: What is the material of the product?
    • A: The product is made of 304 Stainless Steel, ensuring durability and longevity.

Drawing

Nero-NRFW006-Square-Tile-Insert-Floor-Waste-fig (1)

Specifications

  • SKU
    • NRFW006
  • Watermark License
    • WM-032203

Packaging Includes

  • 1x floor waste

FinishNero-NRFW006-Square-Tile-Insert-Floor-Waste-fig (2)

Installation InstructionNero-NRFW006-Square-Tile-Insert-Floor-Waste-fig (3) Nero-NRFW006-Square-Tile-Insert-Floor-Waste-fig (4)

  • The installation of this Shower Grate is subject to the requirement of National
  • Construction Code Volume. The Plumbing Code of Australia (PCA), associated reference standards as applicable at the time and WMTS040.
  • The Maximum live load bearing is 100KG.

Notes

Nero-NRFW006-Square-Tile-Insert-Floor-Waste-fig (5) Nero-NRFW006-Square-Tile-Insert-Floor-Waste-fig (6)

  • Cut grate to suit floor waste allowing at least 3mm of clearance in overall length to facilitate removal for cleaning.Nero-NRFW006-Square-Tile-Insert-Floor-Waste-fig (7)
  • Install floor waste as above picture. Note: it can be installed 2 ways: tile insert placement and normal placement.Nero-NRFW006-Square-Tile-Insert-Floor-Waste-fig (8)
  • www.nerotapware.com.au

Documents / Resources

Nero NRFW006 Square Tile Insert Floor Waste [pdf] Instructions
NRFW006, NRFW008, NRFW006 Square Tile Insert Floor Waste, NRFW006, Square Tile Insert Floor Waste, Tile Insert Floor Waste, Insert Floor Waste, Floor Waste, Waste

References

Leave a comment

Your email address will not be published. Required fields are marked *