NEOGRIP Nintendo Switch OLED and Regular

Fitting the NeoGrip

1. Remove one of the joy cons and put the SWITCH into the NeoGrip.
2. Gently insert the joy-con.
3. Slide in the holder.

Removing the NeoGrip

1. Remove one of the joy cons.
2. Slide off the holder.
3. Remove the SWITCH.

Switching Grips

1. Slide grip downwards to remove and upwards to install.
2. Please ensure the slider is fitted correctly.

Switching to fit regular SWITCH

1. Remove the screws.
2. Slide off the spacer.
3. Install the screws.

Documents / Resources

NEOGRIP Nintendo Switch OLED and Regular [pdf] Instructions Nintendo Switch OLED and Regular, Nintendo, Switch OLED and Regular, OLED and Regular, Regular

References

• User Manual