NAS-AB06W WiFi Smart Home Sensors
Instructions
Thanks for Choosing our WiFi Smart Home Sensors
Product Configuration
Installation
- Backplate installation
● Mark the position of the backplate holes on the wall and drilled
● Align the backplate holes with the wall holes and fix with screws
● Finish！
- Device installation
● Align the racks on the backplate with the device mounting holes then fix it
● Finish！
Note：
- When installing, please align the solar panel with the position where the sun shines for the longest time.
- If there is no sun for two consecutive months, remove the device and charge it through USB.
Specifications
| Power: | Battery powered (18650 x1); USB powered（5V/1A） |
| Battery type: | 18650 rechargeable battery, support USB charge and solar charge. |
| Charge port: | Type-C |
| Wi-Fi type: | 2.4GHz |
| Wi-Fi standard: | IEEE 802.11b/g/n |
| Wireless range: | 45m(Max) |
| Working current: | 700mA(Max) |
| Standby current: | 2.5mA |
| Type of alarm ringtone: | 3 |
| Maximum alarm sound: | 1M–95dB; 3M–90dB |
| Bluetooth version: | Bluetooth 5.0 |
| Waterproof rate: | IPX5 |
| Working temperature: | -10℃～60℃（14°F～140°F） |
| Working humidity: | 0% ～ 90%RH(Non condensation) |
| Storage temperature: | -20℃ ～ 70℃ (-4°F～158°F) |
| Storage humidity： | 0% ～ 90%RH(Non condensation) |
| Size: | 200mm x 150mm x 66mm |
| Solar panel size: | 132mm x 62mm |
LED State
| Device Status | LED State |
| Smart Wi-Fi Mode | Indicator flashes once a seconds |
| Reset/Switch add | Long press the rest bottom for 6s |
| Remark | 1.The indicator light is blue； 2.Support Bluetooth configuration |
Get Started
Download APP
Download the “Smart life” app from APP Store or Google Play to your mobile.
http://smartapp.tuya.com/smartlife
Register and Login
2-1 Launch the “Smart life” app.
2-2 To register, enter your mobile phone number or email address, create a password ,then login to the app.
2-3 Login if you have an account already.
Add Device
3-1 Wi-Fi Mode(Default)
- If you have not turned on the Bluetooth function of your phone, please add devices manually.
- Select the “+” symbol on the top right-hand corner.
- Click “Add Device”– Add Manually “lug(BLE+Wi-Fi)” enter Wi-Fi Mode.
Note:
- If the indicator light is of, please press and hold the reset button for 6 seconds, then add the device according to the status of the indicator light.
- All Wi-Fi products can be added with any Wi-Fi option, and the device only supports 2.4GHz Wi-Fi signals.
3-1 Smart Wi-Fi Mode
Press the reset button until the indicator light blink quickly, then follow the APP prompts to add.
3-2 Bluetooth Mode
3-2-1 Bluetooth Pairing(Add Automatically)
- First open the Bluetooth function of your phone.
- Then enter the app, the “Devices to be added” window will pop up automatically.
3-2-2 Bluetooth network (Add Manually)
- If it does not automatically pop up, you can add the device by following the steps below.
Functions and Settings
- Alarm type selection
- Alarm state display; Click to remove the alarm when it is reported
- Record, you can view the alarm history record of the device.
- Smart, setting smart linkage
- Alarm setting and battery status
4-6 Device Settings 4-6-1 Share Device
4-6-2 Remove Device
Clear records; Delete the device through the APP and add the device again to clear the historical record
Push Notification Setting
If it is disabled, all devices in the APP will not receive notification, but message records will not be affected.
You can experience more functions of the product with the app, just try and do it yourself.
Due to the app update, the above interface is for reference only
Make Your Home Smarter
Documents / Resources
 |
NEO NAS-AB06W WiFi Smart Home Sensors [pdf] Instructions NAS-AB06W WiFi Smart Home Sensors, NAS-AB06W, WiFi Smart Home Sensors, Smart Home Sensors, Home Sensors, Sensors |