Philips Raccoon Outdoor LED Wall Light

Introduction

This document provides comprehensive instructions for the installation, operation, and maintenance of the Philips Raccoon outdoor LED wall light. It is designed to offer reliable and efficient illumination for exterior spaces.

Included and Required Items

What's Included:

• User Manual (A)
• User Manual (B)

Tools Required for Installation (Not Included):

• Power drill ?
• Screwdrivers (Phillips and Flathead) ?
• Pencil ✏️
• Utility knife ?
• Wall plugs and screws (appropriate for your mounting surface)

Product Features and Specifications

Key Features:

• Energy-efficient LED technology.
• Integrated motion sensor for automatic lighting.
• IP44 rated: Protected against splashing water and solid objects larger than 1mm.
• Adjustable sensor settings: Lux (light sensitivity), Time (duration), and Sense (motion sensitivity).
• Durable stainless steel construction for longevity.
• Suitable for outdoor use.
• Not compatible with dimmers. ❌

Technical Specifications:

Installation Guide

Installation Steps:

1. Preparation: Ensure the main power supply is switched OFF at the circuit breaker ⚡ before commencing any electrical work.

   A circuit breaker panel is shown with the switch in the 'OFF' position.

2. Mounting Bracket: Attach the mounting bracket securely to the wall. Use appropriate screws and wall plugs for your wall type. Ensure the fixture is oriented correctly, with the 'TOP' indicator facing upwards.

   Shows the mounting bracket being attached to a wall using screws and wall plugs. The material is identified as Stainless Steel (Inox).

3. Wiring: Open the fixture's wiring compartment. Connect the mains supply wires (Live, Neutral, Earth) to the corresponding terminals (L, N, E) on the internal terminal block. Ensure all connections are firm and secure.

   Illustrates the fixture's backplate with wires entering. A terminal block inside shows 'L', 'N', and 'E' terminals. The 'TOP' indicator is visible for correct orientation.

4. Sensor Cover: Fit the sensor cover onto the main fixture body.

   Shows the sensor cover being attached to the fixture.

5. Fixture Attachment: Mount the main body of the light fixture onto the previously installed wall bracket. Secure it in place using the provided screws.

   Depicts the main fixture body being attached to the wall bracket and fastened with screws.

6. Power On: Once the installation is complete and all connections are verified, switch the main power supply back ON at the circuit breaker.

Operation and Settings

Sensor Adjustments:

The motion sensor allows for customization of its detection behavior. Use the adjustment dials on the fixture:

• Lux (Light Sensitivity): Adjusts the ambient light level required for the sensor to activate. Set to a lower value (closer to ?) for activation in darker conditions, or a higher value (closer to ☀️) for activation only in very low light.
• Time (Duration): Controls how long the light remains illuminated after motion is no longer detected. Adjust the duration using the time dial. ⏳
• Sense (Motion Sensitivity): Modifies the sensitivity of the motion detection. Adjust this dial to fine-tune how readily the sensor detects movement. ?

Testing the Sensor:

After setting the desired parameters, test the motion detection. The light should activate when motion is detected within its range and stay on for the duration set by the 'Time' dial. ▶️

Maintenance

Cleaning and Care:

Periodically clean the fixture to maintain its appearance and performance. Use a soft, damp cloth for cleaning. Avoid using abrasive cleaners or solvents, as they may damage the stainless steel finish. ?

Manufacturer Information

For further assistance or inquiries, please contact Signify:

Signify
I.B.R.S. / C.C.R.I. Numéro 10461
5600 VB Eindhoven, the Netherlands
Customer Service: 00800-74454775
Website: www.philips.com/lighting

Product Model Numbers: 17274/**/16, 4404 016 93603

© 2021 Signify Holding. All rights reserved.