Philips MyGarden June Outdoor Wall Light
User Manual
Product Overview
This document provides instructions for the installation and use of the Philips MyGarden June outdoor wall light.
The light is designed for outdoor use and has an IP44 rating, indicating protection against splashing water and solid objects larger than 1mm.
Included in the box:
- Light fixture
- Mounting hardware
Tools and materials required (not included):
- Drill
- Pencil
- Screwdriver (Phillips and flathead)
- Utility knife
- Light bulb (E27, max 12W)
- Wall plugs and screws (appropriate for your wall type)
Installation Instructions
Please ensure the power is turned OFF at the main switch before beginning installation.
-
Prepare the mounting surface:
Mark the desired location for the light fixture on the wall using a pencil. Drill holes for the mounting screws and insert wall plugs if necessary.
-
Attach the mounting bracket:
Secure the mounting bracket to the wall using the provided screws.
-
Wire the fixture:
Open the wiring compartment. Connect the power supply wires to the terminal block, ensuring correct polarity (Live, Neutral, Ground). Refer to the diagram for wire connections. The fixture is designed for a 230V power supply.
Diagram Description: Shows connecting wires to a terminal block. The terminal block is labeled with symbols for Live, Neutral, and Ground. A finger is shown switching the power to 'OFF' on a circuit breaker panel.
-
Install the light bulb:
Insert an E27 base light bulb with a maximum wattage of 12W into the socket. Screw the bulb in securely.
Diagram Description: Shows screwing an E27 light bulb into the socket. The bulb is a compact fluorescent lamp (CFL) type.
-
Mount the fixture:
Align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is firmly attached.
Diagram Description: Shows attaching the light fixture to the mounting bracket using screws. An Allen key is shown being used to tighten the screws.
-
Final check:
Ensure all connections are secure and the fixture is properly mounted. Turn the power back ON at the main switch.
Diagram Description: Shows a finger switching the power to 'ON' on a circuit breaker panel.
Maintenance and Care
Clean the fixture periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
The fixture is made of Stainless Steel (Inox, Inoxydable, Edelstahl, Roestvrij Staal, Acero Inoxidable) for durability.
Specifications
- Bulb Type: E27
- Maximum Wattage: 12W
- Voltage: 230V
- IP Rating: IP44
- Material: Stainless Steel