CONNECTION MANUAL
SET-UP and INSTALLATION OF THE SYSTEM:
- Plug the cables in the control unit. Cables are color marked and should be inserted in the sockets with corresponding colors on the control unit.
RED MOTOR LOCK – RELAY 1 
YELLOW READER 
WHITE LED 
BLUE CABLE TRANSFER - Control unit should be mounted on the door profile with the help of two screws (when installing a control unit for the door leaf).
– A DIN control unit should be mounted on the DIN rail in a fuse box. - Plug in 12 or 24 V power supply.
- A reader and the control unit should be paired by pressing R button on the control unit for approximately 2 seconds. A beep indicates that the units have been paired successfully.
To access the R button on the control unit in the door leaf, the security bolt over the button should be unscrewed first.
CONNECTION DIAGRAM:
PRODUCTS – A CONTROL UNIT AND A MOTOR LOCK (GU, WINKHAUS, MACO, FUHR, KFV)
CONNECTION DIAGRAM:
PRODUCTS – A CONTROL UNIT AND A MOTOR LOCK (ROTO ENEO)
CONNECTION DIAGRAM:
PRODUCTS – CONTROL UNIT AND ELECTRIC STRIKE
CONNECTION DIAGRAM:
PRODUCTS IN COMBINATION WITH BBX MINI CONTROL UNIT (X-CABLE, KFV, WINKHAUS, GU, FUHR)
CONNECTION DIAGRAM:
PRODUCTS IN COMBINATION WITH BBX MINI CONTROL UNIT (MACO)
CONNECTION DIAGRAM:
PRODUCTS IN COMBINATION WITH BBX MINI CONTROL UNIT (ROTO SH)
CONNECTION DIAGRAM:
PRODUCTS IN COMBINATION WITH BBX MINI CONTROL UNIT (ROTO)
CONNECTION DIAGRAM:
PRODUCTS IN COMBINATION WITH BBX MINI CONTROL UNIT (ELECTRIC STRIKE)
INSTALLATION OUTSIDE THE DOOR
CONNECTION DIAGRAM:
PRODUCTS IN COMBINATION WITH BBX MINI CONTROL UNIT
(WINKHAUS BLUEMOTION, WINKHAUS STV-Set Y, WINKHAUS STV-SET KÜ-T1 FT ZK-EAV 3,5+Y0,5M)
CONNECTION DIAGRAM:
PRODUCTS – DIN CONTROL UNIT AND A MOTOR LOCK (GU, WINKHAUS, KFV, X-CABLE)
CONNECTION DIAGRAM:
PRODUCTS – DIN CONTROL UNIT AND A MOTOR LOCK (MACO, FUHR)
CONNECTION DIAGRAM:
PRODUCTS – DIN CONTROL UNIT AND ELECTRIC STRIKE
CONNECTION DIAGRAM:
PRODUCTS – DIN CONTROL UNIT AND A MOTOR LOCK
(ROTO ENEO)
CABLES: OUTPUT COLORS
CONNECTION DIAGRAM:
FOR CU-201 (A CABLE TRANSFER HAS NOT BEEN PROVIDED BY NAVKOM D.O.O.)
CONNECTION DIAGRAM HAS TO BE PROVIDED BY THE DOOR MANUFACTURER!
| FUNCTION | COLOR |
| GND- | |
| +12/24 V | |
| SIGNAL | |
| RELAY 2 | |
| RELAY 2 | |
stamp and siganture of the manufacturer
Documents / Resources
 |
Navkom 20 Fingerprint Readers [pdf] User Manual 20 Fingerprint Readers, 20, Fingerprint Readers, Readers |
