Narda FieldMan App

Introduction

The Narda FieldMan allows for seamless data management through its dedicated FieldMan App. This application provides the capability to print measurement results directly from a smartphone using a Bluetooth-enabled mobile printer. This guide outlines the steps required to configure and print FieldMan measurement data.

Requirements

Before proceeding, ensure the following:

• Narda FieldMan device with measurement data available
• FieldMan App installed on a smartphone (iOS/Android)
• Bluetooth mobile printer (compatible with smartphones and a Bluetooth printer App)
• Active Bluetooth connection between smartphone and printer

Printing Measurement Data

Step 1: Connect the Bluetooth Printer

1. Turn on the mobile Bluetooth printer and set it to pairing mode.
2. On the smartphone, navigate to Bluetooth settings and pair it with the printer.
3. Ensure that the connection is successful and the printer is recognized.

Step 2: Open the FieldMan App

1. Launch the FieldMan App on your smartphone.
2. Select the Data Logger menu and then Screenshots to access saved readings.
3. Download the desired measurement record from the screenshots to the smartphone by pressing the FieldMan symbol with a down arrow to its right.
4. Open the the screenshot to view.

Step 3: Print the Measurement Report

1. Tap on the Share button option within the FieldMan App.
2. Select the Bluetooth printer app with the paired Bluetooth printer from the available apps.
3. Confirm the printing settings (e.g., paper size, format).
4. Press Print

Downloading Measurement Data via FieldMan App

For users who wish to store or share data digitally, the FieldMan App also supports measurement data downloads.

Step 1: Access Measurement Data

1. Open the FieldMan App.
2. Navigate to the Data Logger menu and then Measurements section.
3. Select the required measurement file and download it to the smartphone by pressing the FieldMan symbol with a down arrow to its right.

Step 2: Export Data

1. Select the measurement file.
2. Press the Share button.
3. Select a destination (local storage, email, cloud services).
4. Confirm the download and verify that the file is saved successfully.

Watch the Video

Conclusion

The FieldMan App enhances usability by enabling direct measurement printing via a Bluetooth printer and seamless data export for further analysis. By following this guide, users can efficiently manage and distribute measurement reports. For further assistance, refer to the official Narda FieldMan user manual or contact technical support.

Narda Safety Test Solutions GmbH
Sandwiesenstrasse 772793 Pfullingen, Germany Phone +49 7121 97 32 0
info@narda-sts.com

Narda Safety Test Solutions
North America Sales Office 435 Moreland Road Hauppauge, NY11788, USA Phone +1 631 231 1700
info@narda-sts.com

Narda Safety Test Solutions S.r.l.
Via Rimini, 22 20142 Milano, Italy Phone +39 0258188 1
nardait.support@narda-sts.it

www.narda-sts.com

Names and Logo are registered trademarks of Narda Safety Test Solutions GmbH – Trade names are trademarks of the owners.

NSTS 03/25 | Application Note | Subject to change without notice www.narda-sts.com

Documents / Resources

narda FieldMan App [pdf] User Guide FieldMan App, App

References

• User Manual