n-com SPCOM00000050 Helmet Intercom System

INSTRUCTIONS FOR REPLACING THE SPCOM00000050

1. Remove the N-Com system from the helmet (see instruction booklet).
2. Remove the plastic clip and remove the keyboard (Fig. 1-2).
3. If necessary, before you apply the new keyboard, remove the bi-adhesive found on the plastic coupling clip.
4. Apply the new keyboard and reposition the plastic coupling clip (Fig. 3-5).
5. Reposition the N-Com system inside the helmet (see instruction booklet).

Documents / Resources

n-com SPCOM00000050 Helmet Intercom System [pdf] User Manual SPCOM00000050 Helmet Intercom System, SPCOM00000050, Helmet Intercom System, Intercom System

References

• User Manual