Multiverse 5914 Connect Module User Guide

Connect your DMXcat or console to a Multiverse Node, or any other Multi-verse wireless DMX/RDM transceiver.
Set a SHoW ID on your Multiverse Node or other Multiverse transceiver. For this example, we’ll use SHoW ID: 24252.

Select a Universe on your Multiverse Node or other Multiverse transceiver. For this example, we’ll use Universe: 2.

Fixture Prep

Unscrew two screws on the plastic plate from the base of the MAC Viper XIP fixture using a T10 screwdriver.
Remove the plastic plate from the base. This exposes the Universal Connect Module plug.

Attach the Multiverse Connect Mod-ule to the plug using the two screws from the fixture’s plastic plate, ensuring it is securely connected.

Antenna Setup

Fasten the antenna clip to the fixture base, which will hold the antenna in place.

Install the antenna by securing it to the Multiverse Connect Module manually.
Once secured, the Multiverse Connect Module installation is complete.

Fixture Setup

Click the buttons to the right of the fixture’s screen, to find “DMX Setup” un-der the Main navigation. Navigate to the two sub-menus required for setup: “Wireless” and “DMX Universe.”

In the “Wireless” menu, the fixture will auto-detect if it is connected to a Multiverse Connect Module.
Confirm the SHoW ID and SHoW Key match the Multiverse Node, or other wireless DMX transceiver, settings.
The system is now ready to function wirelessly.

Fixture Settings

Within settings, you can also view “Antenna” information, and change the antenna type to match the installed an-tenna. The default “Omni” setting comes with the Mutiverse Connect Module.

View output power settings. The default setting is “Mid.”
Navigate to the “DMX Universe” menu to confirm the selected universe matches the Multiverse Node, or other wireless DMX transceiver. In this example, Universe should equal 2 (refer to step 3).

Access the “Module Name” menu to view additional information, including: City Theatrical manufactur-er name, firmware version, locked and bound status, and signal strength and quality.
The fixture’s outermost menu will indicate in “DMX Address” whether it is receiving wireless DMX from the Mul-tiverse Connect Module. It displays the SHoW ID and quality as a percentage.

In the “DMX Live” menu, you can view DMX values.
If appropriately installed and there is active DMX, the source of the DMX will show “UCM”, for Universal Connect Module.

The Multiverse Connect Module provides seamless wireless DMX/RDM integration when properly installed on Martin Professional’s MAC Viper XIP fixture. Question or concerns? Email: support@citytheatrical.com

City Theatrical P/N: 5914
citytheatrical.com/products/mcm

FAQ

Q: What if I encounter issues with wireless DMX functionality?
A: If you encounter issues, ensure proper installation of the Multiverse Connect Module on the MAC Viper XIP fixture and verify settings match between devices.
Q: How can I contact support for further assistance?
A: For questions or concerns, contact support via email at support@citytheatrical.com

Documents / Resources

Multiverse 5914 Connect Module [pdf] User Guide
5914, 5914 Connect Module, 5914, Connect Module, Module

References

User Manual

Multiverse 5914 Connect Module

Wireless DMX Prep