Combuh B5 Rechargeable Sensor Ceiling Lights
INTRODUZZJONI
Għal madwar $19.99, the Combuh B5 LED Battery-Operated Ceiling Light provides a stylish, wire-free lighting option. Depending on settings and usage, its powerful 5000 mAh rechargeable battery may provide up to 13 hours of continuous light in ON mode or 25–45 days in motion-sensor mode. Choose between the full-range AUTO2 and energy-efficient AUTO1 (darkness-only activation) or the manual ON mode with optional timer controls (15/30/60 minutes). Its motion sensor activates within 13 feet (4 m). You may adjust brightness to suit your mood with stepless dimming (5–100%) and three color temperatures (warm, neutral, and cool). The Combuh B5 is a stylish and practical lighting option for corridors, showers, closets, and more. It is waterproof and magnetic for flexible positioning, especially in moist interior spaces like bathrooms.
SPEĊIFIKAZZJONIJIET
| Numru tal-Mudell | B5 |
| Prezz | Appross. $19.99 |
| Kapaċità tal-batterija | 5000 mAh (USB‑C rechargeable) |
| Ħin ta' tħaddim (Modalità ON) | ~ sagħtejn |
| Ħin ta' Tħaddim (Modalità tas-Sensor) | 25–45 days (depending on brightness & use) |
| Medda tas-Sensor tal-Moviment | ~13 ft (4 m), 120° |
| Modi | AUTO1 (darkness only), AUTO2 (24/7), ON Mode with timer (15/30/60 min) |
| Dimming | Stepless (5–100%) |
| Temperaturi tal-Kulur | Warm / Neutral / Cool |
| Luminożità | 250 lumens; 83 lm/W efficiency |
| Klassifikazzjoni li ma jgħaddix ilma minnha | Indoor-safe for damp areas (not outdoor-rated) |
| Installazzjoni | Magnetic mount, 3M adhesive, or screw (flexible installation) |
| Diameter × Height | 7.48 in × 0.59 in (≈19 cm × 1.5 cm) |
| Materjal | ABS + Polikarbonat |
| Metodu ta' Kontroll | Remote control + push buttons |
| Garanzija | 2 snin |
| Klassifikazzjoni tal-IP | Klassifikazzjoni IP44 li ma jgħaddix ilma minnha |
X'INHU FIL-KAXXA
- 1 × Combuh B5 Ceiling Light
- 1 × Kontroll mill-bogħod
- 1 × Kejbil tal-Iċċarġjar USB-C
- 1 × Iron Mounting Plate
- 1 × Double‑Sided Tape
- 2 × Screws + Rubber Caps
- 1 × Manwal
KARATTERISTIĊI
- Built-In 5000 mAh Rechargeable Battery: Say goodbye to disposable batteries this powerful built-in battery offers sustainable, long-term lighting.
- Ħin ta' Użu Estiż: Delivers up to 13 hours of continuous light or 25 to 45 days when used in motion-sensor mode.
- Smart Motion Detection Modes: Choose between auto-on when ambient light is low, or all-day detection—ideal for both day and night use.
- Manual ON Mode with Auto Timer: Convenient auto shut-off options for 15, 30, or 60 minutes, perfect for temporary lighting needs.
- Smooth Stepless Dimming (5%–100%): Fine-tune the brightness to suit everything from reading to ambient lighting.
- Triple Color Temperature Options: Easily switch between warm, neutral, or cool white tones to create the perfect atmosphere.
- Għażliet ta 'Immuntar flessibbli: Install damage-free using magnetic backing and 3M adhesive, or opt for screws for extra stability on rough surfaces.
- Disinn reżistenti għall-ilma: Built to handle moisture-prone spaces like kitchens, bathrooms, and laundry areas.
- Kopertura Wiesgħa tad-Dawl: Effectively illuminates spaces between 54 to 108 square feet—great for mid-sized areas like closets, hallways, or pantries.
- Bright and Efficient Output: Produces up to 250 lumens with minimal energy draw, combining brightness with efficiency.
- Għażliet ta' Kontroll faċli: Operate with the included remote or onboard buttons—whichever you find most convenient.
- Compact, Lightweight Build: Its slim form keeps it discreet while providing powerful illumination.
- Stylish Modern Finish: Designed to blend in seamlessly with your home decor while upgrading your space.
- Two Installation Modes: Choose magnetic attachment for easy removal or screw it in for permanent placement.
- Garanzija Mingħajr Inkwiet: Backed by a 2-year manufacturer’s warranty to ensure lasting peace of mind.
GWIDA TAS-SETUP
- Pass 1: Iftaħ kollox bir-reqqa: Remove all components from the box and make sure everything you need is included.
- Step 2: Fully Charge the Light: Use the provided USB-C cable to charge the unit for around 4 to 5 hours until the indicator shows it’s ready.
- Step 3: Clean the Installation Area: Wipe down the ceiling, cabinet, or wall where the light will be placed to ensure secure mounting.
- Step 4: Choose Your Mounting Method: Either stick it using the 3M adhesive or screw it onto uneven or textured surfaces for extra grip.
- Step 5: Attach the Mount Securely: Fix the mounting plate in position and align the magnetic base of the light for a snug fit.
- Step 6: Turn It On: Use the physical buttons or remote control to power on the device.
- Step 7: Pick a Mode: Select between AUTO1 (ambient light sensor + motion), AUTO2 (motion-only), or ON for continuous lighting.
- Step 8: Adjust the Brightness: Dim or brighten the light smoothly to match your specific lighting needs.
- Step 9: Set the Color Temperature: Choose from warm, natural, or cool white depending on your preference or time of day.
- Step 10: Activate Auto-Off Timer: In ON mode, set the timer for 15, 30, or 60 minutes to save energy.
- Step 11: Test Motion Sensor: Walk within range to see how it triggers light-up—ideal for entryways, stairs, and closets.
- Step 12: Check for Auto Shutoff: Ensure it turns off automatically after approximately 20 seconds of no motion.
- Pass 13: Erġa' ċċarġja meta jkun meħtieġ: When brightness fades, simply detach and plug it back in using the USB-C cable.
- Step 14: Remount Easily: Once recharged, snap the light back onto the magnetic plate for continued use.
KURA U MANUTENZJONI
- Keep Surfaces Clean: Wipe the light and mounting base with a dry or slightly damp cloth—never soak or submerge.
- Maintain Adhesion and Magnetism: Periodically clean magnetic and adhesive areas to prevent slippage or detachment.
- Erġa' iċċarġja minnufih: If the light seems dimmer than usual, it’s time for a recharge before your next use.
- Uża Ġewwa biss: While water-resistant, this light is not suitable for outdoor exposure.
- Drain Battery for Storage: Fully deplete and then recharge before storing for extended periods.
- Ibdel Batteriji Remote: If the remote becomes less responsive, replace the battery to restore functionality.
- Inspect Moisture Seals: In humid rooms, occasionally check for signs of condensation or weakening seals.
- Secure the Mount Regularly: If adhesive begins to wear out, reinforce with new tape or use the screw mount.
- Immaniġġja b'Kura: Avoid dropping or hitting the unit to protect internal components and battery life.
- Test Sensor Periodically: Walk within the range to confirm the motion sensor is still functioning accurately.
- Żomm il-Kontrolli Nodfa: Ensure that buttons remain free of dust or grime for smooth operation.
- Naddaf il-Lenti tas-Sensor: Gently wipe the sensor area to maintain reliable detection performance.
- Unplug Before Cleaning Internals: If you ever open the housing for any reason, ensure the unit is unplugged.
- Use a Reliable Charger: Always connect to a stable USB power source to avoid charging issues.
SOLUZZJONI TA’ PROBLEMI
| Ħruġ | Soluzzjoni |
|---|---|
| Id-dawl mhux se jixgħel | Ensure full charge; check USB cable and power source. |
| Is-sensorju tal-moviment ma jattivax | Clean sensor, try AUTO2 or adjust ambient light sensitivity. |
| ON mode not timing out | Confirm timer is activated (15/30/60 min setting). |
| Dimming mhux qed jaħdem | Use the correct dimming buttons or remote; reset if unresponsive. |
| It-temperatura tal-kulur mhux se tinbidel | Cycle modes via remote or button until desired tone appears. |
| Light detaches from mount | Clean surface or use screws for textured areas. |
| Waterproofing kompromessa | Dry thoroughly and ensure rubber seals/caps are intact. |
| Weak daylight detection | Switch to AUTO2 for full-day detection. |
| Ħin qasir ta' tħaddim tal-batterija | Reduce always-on duration or lower brightness. |
| Remote ma jirrispondix | Replace remote battery and ensure line of sight. |
PROS & KONTRO
Vantaġġi:
- Long battery life with fast USB-C recharge.
- Smart motion and manual modes for flexibility.
- Adjustable brightness and color temperature.
- Easy, renter-friendly installation.
- Waterproof for safer use in bathrooms.
Żvantaġġi:
- Not rated for full outdoor exposure.
- Always-on mode shortens battery quickly.
- Mounting adhesive may weaken in humid areas.
- Remote batteries will need periodic replacing.
- Slightly higher upfront cost for the feature set.
GARANZIJA
The Combuh B5 unit comes with a garanzija ta 'sena, offering replacement or support for manufacturing-quality issues
MISTOQSIJIET FREQUENTI
What are the available lighting color modes on the Combuh B5 Rechargeable Sensor Ceiling Light?
The Combuh B5 offers three color temperature options: warm white, neutral white, and cool white. These can be changed using the onboard button or included remote.
How do I dim the light on the Combuh B5 model?
Brightness can be adjusted steplessly from 5 to 100 percentage using the built-in button or the remote control included in the package.
How long does the battery of the Combuh B5 last after a full charge?
On full charge (via USB-C), it lasts up to 13 hours in ON mode, or 25–45 days in motion sensor mode, depending on brightness and motion activity.
What installation methods are supported by the Combuh B5 Sensor Ceiling Light?
You can install it using 3M adhesive, screws, or directly onto metal surfaces via the built-in magnetic base tool-free and renter-friendly.
How do I activate timer functions on the Combuh B5 light?
Use the remote control to set auto-off timers for 15, 30, or 60 minutes while in ON mode.
The motion sensor on my Combuh B5 ceiling light is not triggering—what should I do?
First, ensure it is set to AUTO1 or AUTO2 mode, not ON. Then check if the sensor is blocked or if it s placed too high-far from movement. Max range is 13 ft -4m.
How do I know when my Combuh B5 light is fully charged?
When connected via USB-C, the indicator LED should stop blinking or stay solid (depending on version) when the battery is fully charged typically in 4 to 5 hours.