msi S2301 Server System
Product Specifications
- CPU: Dual AMD EPYCTM 9004 and 9005 series processors, TDP up to 500W
- Memory: 24 DDR5 DIMM slots supporting RDIMMs and 3DS-RDIMMs, max capacity of 256GB per DIMM
- Max Memory Frequency:
- AMD EPYCTM 9004: 4800 MT/s (1DPC)
- AMD EPYCTM 9005: 6000 MT/s (1DPC)
Product Usage Instructions
CPU & Heatsink Installation:
- Ensure the system is powered off and unplugged.
- Locate the CPU socket on the motherboard.
- Carefully align the CPU with the socket ensuring correct orientation.
- Gently place the CPU into the socket and secure it in place according to the motherboard instructions.
- Install the heatsink/fan on top of the CPU, ensuring proper thermal paste application.
- Connect the heatsink fan to the designated header on the motherboard.
Front Panel Connector Installation:
- Identify the front panel connectors labeled on the motherboard.
- Refer to the user manual for the specific pin layout of each connector.
- Connect the power LED, HDD activity LED, power button, reset button, and other front panel connectors accordingly.
- Ensure a secure connection for each connector to avoid any malfunctions.
Memory Installation:
- Power off the system and unplug all cables.
- Locate the DDR5 DIMM slots on the motherboard.
- If populating multiple DIMMs, refer to the motherboard manual for the optimal configuration.
- Carefully insert the DDR5 DIMMs into the slots, ensuring they are fully seated.
- Apply equal pressure on both ends of the DIMM to secure it in place.
FAQ
- What should I do if the system fails to boot after installing new memory?
If the system fails to boot after installing new memory, try reseating the DIMMs or using only one DIMM at a time to identify any faulty modules. Ensure the memory modules are compatible with the motherboard specifications. - How can I configure the UID LED button as a BMC reset button?
To configure the UID LED button as a BMC reset button, use jumper JUID_SEL1 as directed in the manual. Change the jumper position to enable this functionality.
OVERVIEW
Front Panel FPC Connector
CPU
Dual AMD EPYC™ 9004 and 9005 series processors, TDP up to 500W.
CPU & Heatsink Installation
Connectors, Jumpers and LED Indicators
| Name | Description |
| PSU_PWR1~2 | CRPS power connectors |
| GPU_PWR1~2 | 8-pin GPU power connectors |
| HDD_PWR1~3 | 8-pin HDD BP power connectors |
| RISER_PWR1~2 | 4-pin PCIe riser power connector |
| JMCIO1~8 | MCIO 8i connectors (for HDD BP MS-S362M) |
| JMCIO11~14 | MCIO 8i connectors (for HDD BP MS-S362N) |
| JMCIO_SLOT1-1~2 | MCIO 8i connectors (for PCIe riser cable) |
| JMCIO_SLOT2-1~2 | |
| Riser Cable Slot #1 | PCIe 5.0 x 16 slot (from CPU0) |
| Riser Cable Slot #2 | PCIe 5.0 x 16 slot (from CPU1) |
| OCP1 | OCP 3.0 LAN mezzanine slot
(supports OCP NIC 3.0 SFF, PCIe 5.0 x16 from CPU0) |
| M2_1~2 | M.2 slots (M Key, PCIe 3.0 x2, 2280) |
| MSD1 | Micro SD card slot |
| CPU_FAN1~2 | 4-pin CPU fan connectors |
| F2U-1~6 | 10-pin 2U system fan connectors |
| JUSB1 | USB 3.2 Gen 1 Type-A port |
| JUSB2 | USB 3.2 Gen 1/ USB 2.0 FPC connector
(for front USB, USB 3.2 Gen 1 Type-A + USB 2.0 Type-A) |
| JFP1 | Front panel FPC connector |
| JFP_VGA1 | Front VGA header |
| JTPM1 | SPI TPM header |
| FBP_I2C_1~3 | I2C headers |
| JIPMB1 | IPMB header |
| JCHASSIS1 | Chassis intrusion header |
| JSPI_MUX1 | BIOS select jumper (default pin 1-2, SYS BIOS ROM & control by BMC) |
| JSEL_BMC1 | BMC select jumper (default pin 1-2, BMC1) |
| JRTC_CLR1 | CMOS clear jumper (default pin 1-2, normal) |
| JUID_SEL1 | UID/ BMC select jumper (default pin 1-2, UID button) |
| JCXL_NVME_SW1 | HDD BP CXL/ NVMe select jumper (default pin 1-2, 8 x CXL, 8 x NVMe) |
| SEG_LED1~4 | Port 80 debug LEDs |
| BMC_HB_LED | BMC heartbeat LED |
Memory
The system is equipped with 24 DDR5 DIMM slots, supporting both RDIMMs and 3DS-RDIMMs. Each DIMM has a maximum capacity of 256GB.
Max Frequency
- AMD EPYC™ 9004: 4800 MT/s (1DPC)
- AMD EPYC™ 9005: 6000 MT/s (1DPC)

Important
There should be at least one DDR5 DIMM populated.
Documents / Resources
![]() | S2301 Server System |
References
- User Manualmanual.tools
Published: December 2, 2024
