BLUETOOTH HEADPHONE MODEL: BH059A
Packages
Diagram
- With the headphone off, press the ”
” button for about 4~5 seconds, until the red and blue indicators take turns to flash. - Turn on the Bluetooth function on your phone.
- Search for the Bluetooth devices and select ” MPOW-059″.
Play/ Pause/ Make a Call/Answer a Call/ Hang up a Call/ Reject a Call
Clearing Pairing Information
Volume Control /Music Control
Charge Battery
Safety Notice
- Do not disassemble or modify the headphone at any reason, otherwise, It may damage the headphone.
- Please keep the equipment along with all the accessories out of the reach of children and pets.
- Do not put the device under the environment which the temperature is too low or too high ( Below 0℃ or over 45℃).
- Please do not wet the device, for the liquid can cause serious damage to the device.
- Please do not operate the device in thunderstorm weather.
Operation is subject to the following three conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Support: https://www.xmpow.com/
MPOW 059 Headphones User Manual – Optimized PDF
MPOW 059 Headphones User Manual – Original PDF
References
- User Manualmanual.tools
Good evening, I can’t change the audio language, where it indicates battery level, etc. Can you help me?
Thank you
Buenas noches, no consigo cambiar el idioma de audio, donde indica nivel de bateria, etc. Me pueden ayudar?
Gracias
Thank you</em>
Buenas noches, no consigo cambiar el idioma de audio, donde indica nivel de bateria, etc. Me pueden ayudar?
Gracias
How do I change the audio prompt language on MPOW 059 headphones?
Based on the official manual for the MPOW 059 (BH059A), there are no documented instructions for changing the voice prompt language. Most MPOW headphones are pre-set to English and do not support multiple languages for status alerts like battery level.
However, for many MPOW models, you can try the following common reset/toggle method to see if it affects the language settings:
If this does not work, your specific version of the 059 headphones likely only supports one language. Regarding the battery level, on most modern smartphones (iOS and Android), you can view the exact battery percentage of the headphones in your phone's Bluetooth settings or status bar once connected.
Read the full Q&A page
How do I change the language of my headphones?
Changing the language on a Bluetooth headset
Turn on your headphones and pair them with a device. …
Press and hold the ON and OFF buttons simultaneously for 4-5 seconds. …
Scroll through the languages or wait for the desired language to appear. …
Select the language you want.
How do I change the language on my headset?
Changing Language On A Bluetooth Headset
Turn your headset on and pair it with a device. …
Simultaneously press and hold the ON and OFF buttons for 4-5 seconds. …
Scroll through the languages or wait for the desired language to come up. …
Select the language you wanted.
¿Cómo cambio el idioma de mis auriculares?
Cambio de idioma en un auricular Bluetooth
Encienda sus auriculares y vincúlelos con un dispositivo. …
Presione y mantenga presionados simultáneamente los botones de ENCENDIDO y APAGADO durante 4-5 segundos. …
Desplácese por los idiomas o espere a que aparezca el idioma deseado. …
Seleccione el idioma que desea.
How do I change the language on my headset?
Changing Language On A Bluetooth Headset
Turn your headset on and pair it with a device. …
Simultaneously press and hold the ON and OFF buttons for 4-5 seconds. …
Scroll through the languages or wait for the desired language to come up. …
Select the language you wanted.
Changing the language on a Bluetooth headset
Turn on your headphones and pair them with a device. ...
Press and hold the ON and OFF buttons simultaneously for 4-5 seconds. ...
Scroll through the languages or wait for the desired language to appear. ...
Select the language you want.
How do I change the language on my headset?
Changing Language On A Bluetooth Headset
Turn your headset on and pair it with a device. ...
Simultaneously press and hold the ON and OFF buttons for 4-5 seconds. ...
Scroll through the languages or wait for the desired language to come up. ...
Select the language you wanted.<e/em>
¿Cómo cambio el idioma de mis auriculares?
Cambio de idioma en un auricular Bluetooth
Encienda sus auriculares y vincúlelos con un dispositivo. ...
Presione y mantenga presionados simultáneamente los botones de ENCENDIDO y APAGADO durante 4-5 segundos. ...
Desplácese por los idiomas o espere a que aparezca el idioma deseado. ...
Seleccione el idioma que desea.
How do I change the language on my headset?
Changing Language On A Bluetooth Headset
Turn your headset on and pair it with a device. ...
Simultaneously press and hold the ON and OFF buttons for 4-5 seconds. ...
Scroll through the languages or wait for the desired language to come up. ...
Select the language you wanted.
How do I change the language of my MPOW 059 headphones?
The official manual for the MPOW 059 (BH059A) does not explicitly list a language-switching feature. However, for many MPOW over-ear models, you can attempt to change the voice prompt language by following these steps:
Please note that if this button combination does not work, your specific hardware version may only support a single default language. If you are currently hearing a language you did not intend (such as Chinese instead of English), performing a Pairing Reset may also help. To clear pairing information on the MPOW 059, press and hold the Multifunction Button (MFB) and the Volume + button simultaneously for 5 seconds while the device is powered on.
Read the full Q&A page
How long can they be used before they run out of charge. How can you tell when they are getting low on charge.
What is the battery life of the MPOW 059 headphones and how do I know when the battery is low?
Based on the MPOW 059 (BH059A) specifications, here are the details regarding battery usage and monitoring:
If you are using the headphones with an iOS or some Android devices, you may also be able to see a battery level icon next to the Bluetooth symbol in your device's status bar.
Read the full Q&A page
When my headphones are turned on they cause my television shows to start going at high-speed! I have to turn the power off on the headphones and run the sound through the television itself in order to watch the programs. Is there someway to fix this problem? My attempts to reset the headphones have not solved the issue.
Why do my MPOW 059 headphones cause my television shows to play at high speed when connected?
The issue you are describing is likely not a hardware defect of the MPOW 059 headphones themselves, but rather a Bluetooth synchronization or processing error between the headphones and your television's operating system. When a Bluetooth device struggles to maintain a stable audio sync, some smart TVs or streaming devices may attempt to 'catch up' the video to the audio, resulting in a high-speed playback effect.
Since you have already attempted to reset the headphones, please try the following steps to resolve the interference:
If the problem persists only with this specific TV, the issue is likely a compatibility limitation with the TV's Bluetooth transmitter rather than the headphones.
Read the full Q&A page