MOXA logo

V2201 Series
Quick Installation Guide

Technical Support Contact Information www.moxa.com/support

Moxa Americas:
Toll-free: 1-888-669-2872
Tel: 1-714-528-6777
Fax: 1-714-528-6778
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel: +86-21-5258-9955
Fax: +86-21-5258-5505
Moxa Europe:
Tel: +49-89-3 70 03 99-0
Fax: +49-89-3 70 03 99-99
Moxa Asia-Pacific:
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
Moxa India:
Tel: +91-80-4172-9088
Fax: +91-80-4132-1045

MOXA V2201 Series X86 Computers-sn

©2020 Moxa Inc. All rights reserved.

Overview

The Moxa V2201 Series ultra-compact x86 embedded computer is based on the Intel® Atom™ E3800 Series processor, features the most reliable I/O design to maximize connectivity, and supports dual wireless modules, making it suitable for a diverse range of communication applications. The computer’s thermal design ensures reliable system operation in temperatures ranging from -40 to 85°C, and wireless operation in temperatures ranging from -40 to 70°C with a special purpose Moxa wireless module installed. The V2201 Series supports “Moxa Proactive Monitoring” for device I/O status monitoring and alerts, system temperature monitoring and alerts, and system power management. Closely monitoring the system status makes it easier to recover from errors and provides the most reliable platform for your applications.

Package Checklist

Before installing the V2201, verify that the package contains the following items:

  • V2201 embedded computer
  • Terminal block to power jack converter
  • Wall mounting kit
  • Quick installation guide (printed)
  • Warranty card

NOTE: Please notify your sales representative if any of the above items are missing or damaged.

V2201 Panel Layout

The following figures show the panel layouts of the V2201-W models; for “non-W” models, the 5 antenna connectors will not be installed during production.
Front View

MOXA V2201 Series X86 Computers-Front View

Right Side View

MOXA V2201 Series X86 Computers-Right Side View

Left-side View

MOXA V2201 Series X86 Computers- Left-side View

LED Indicators

The following table describes the LED indicators located on the front pan of the V2201.

LED NameStatusFunction
PowerGreenPower is on and the computer is functioning normally.
OffPower is off
User-DefinedRedEvent has occurred
OffNo alert
mSATAYellowBlinking: Data is being transmitted
OffNot connected / No data transmission
SD CardYellowBlinking: Data is being transmitted
OffNot connected / No data transmission
Wireless 1GreenSteady On: Link is On
Blinking: Data is being transmitted
OffNot connected
Wireless 2GreenSteady On: Link is On
Blinking: Data is being transmitted
OffNot connected
LAN 1YellowSteady On 1000 Mbps Ethernet link Blinking: Data is being transmitted

 

LED NameStatusFunction
GreenSteady On: 100 Mbps Ethernet link Blinking: Data is being transmitted
Off10 Mbps Ethernet link or LAN is not connected
LAN 2YellowSteady On 1000 Mbps Ethernet link Blinking: Data is being transmitted
GreenSteady On: 100 Mbps Ethernet link Blinking: Data Is being transmitted
Off10 Mbps Ethernet link or LAN is not connected
Tx 1GreenBlinking: Data is being transmitted
OffNot connected
Tx 2GreenBlinking: Data is being transmitted
OffNot connected
Rx 1YellowBlinking: Data is being transmitted
OffNot connected
Rx 2YellowBlinking: Data is being transmitted
OffNot connected

NOTE The Mini PCIe card’s LED behavior depends on the module

Installing the Wireless Modules

NOTE ATTENTION
“-W” models (e.g., V2201-E2-W-T) will have a cellular card heat sink and 5 wireless SMA connectors installed during the production process.
The V2201 has two mini-PCIe sockets on the bottom panel. One socket supports USB signals only, using the MC9090, MC7354, or MC7354 mini-PCIe cards. Another socket supports standard USB + PCIe signals.
STEP1: Loosen the four screws in the middle of the bottom panel and open the bottom cover.

MOXA V2201 Series X86 Computers-each bracketThere are two mini-PCIe sockets: Socket 1: USB signal, for 3G/LTE mini-PCIe card (Sierra Wireless MC9090, MC7304, or MC7354).

MOXA V2201 Series X86 Computers-socket 1NOTE: The cellular card heat sink is installed in socket 1.
Socket 2: Standard USB + PCIe signals, for Wi-Fi mini-PCIe card (SparkLAN WPEA-252NI).MOXA V2201 Series X86 Computers-STEP 3STEP 2: Insert the wireless module card at an angle.
STEP 3: Push the wireless module card down and fasten it with the 2 screws that were included with the product.
STEP 4: Connect the connectors with the corresponding wireless module cards.MOXA V2201 Series X86 Computers-Connect the connectors5 connectors are attached to the mini-PCIe sockets:
No. 1 & No. 3:
Wi-Fi mini-PCIe card
No. 2 & No. 4:
3G/LTE mini-PCIe card
No. 5: GPS
STEP 5: Replace the bottom cover.
STEP 6: You may also purchase external 3G, 4G, and Wi-Fi antennas from Moxa. Please contact a Moxa sales representative for information. After installing the wireless modules and wireless external antennas, the computer should appear as follows:

MOXA V2201 Series X86 Computers-external antennas

Installing the V2201

DIN-rail Mounting
The DK-DC50131 die-cast metal kit, which is shipped with the product, enables easy and robust installation of the V2201. Use the six M4*6L FMS screws included attaching the DIN-rail mounting kit tightly to the side panel of the V2201.
Installation:
STEP 1: Insert the upper lip of the DIN rail into the DIN-rail mounting kit.
STEP 2: Press the V2201 towards the DIN rail until it snaps into place.

MOXA V2201 Series X86 Computers-InstallationRemoval:
STEP 1: Pull down the latch on the mounting kit with a screwdriver. STEP 2 & 3:
Use a screwdriver to pry the V2201 slightly forward away from the DIN rail, and then lift the V2201 upwards to remove it from
the DIN rail.MOXA V2201 Series X86 Computers- RemovalSTEP 4: Press the recessed button on the spring-loaded bracket to lock it into position until the next time you need to install the V2201 to a DIN rail.MOXA V2201 Series X86 Computers- lockWall or Cabinet Mounting
The V2201 comes with two metal brackets for attaching it to a wall or the inside of a cabinet. Four screws (Phillips truss-headed M3*6L nickel-plated with Nylok®) are included in the kit.
Step 1: Use two screws for each bracket and attach the bracket to the rear of the V2201.MOXA V2201 Series X86 Computers-STEP1Step 2: Use two screws on each side to attach the V2201 to a wall or cabinet.MOXA V2201 Series X86 Computers- product package The product package does not include the four screws required for attaching the wall-mounting kit to the wall; they need to be purchased separately. We recommend that you use M3*5L standard screws.
NOTEATTENTION
This equipment is intended to be used in Restricted Access Locations, such as a computer room, with access, limited to SERVICE PERSONAL or USERS who have been instructed on how to handle the metal chassis of equipment that is so hot that special protection may be needed before touching it. The location should only be accessible with a key or through a secure identity system.

Connector Description

Power Connector
Connect the 9 to 36 VDC LPS or Class 2 power line to the V2201’s terminal block. If the power is supplied properly, the Power LED will light up. The OS is ready when the Ready LED glows solid green.
NOTE ATTENTION
The power cord of the adapter should be connected to a socket outlet with earthing connection.
NOTE ATTENTION
This product is intended to be supplied by a Listed Power Adapter or DC power source, output rated 9 to 36 VDC, 3.5 to 1 A  minimum, Tma = 85 degrees C minimum.
Grounding the V2201
Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the grounding screw (M4) to the grounding surface prior to connecting the power.

MOXA V2201 Series X86 Computers- Grounding
NOTE ATTENTION
This product is intended to be mounted to a well-grounded mounting surface, such as a metal panel.
SG: The Shielded Ground (sometimes called Protected Ground) contact is the right most of the 3-pin power terminal block connector when viewed from the angle shown here. Connect the SG wire to an appropriate grounded metal surface.

MOXA V2201 Series X86 Computers-metal panelHDMI Outputs
The V2201 comes with a type A HDMI female connector on the front panel to connect an HDMI monitor.
The screw hole above the HDMI connector is used to attach a custom lock to the HDMI connector; a custom lock is needed since the shape of different HDMI connectors is not the same. Please contact a Moxa sales representative for details.
The lock appears as shown below:

MOXA V2201 Series X86 Computers-lock appearsThe lock should appear as follows after it is attached to the V2201:
Ethernet Ports
The 10/100/1000 Mbps Ethernet ports use RJ45 connectors.

MOXA V2201 Series X86 Computers-lock should appear

Pin 10/100 Mbp1000 Mbps
1ETx+TRD(0)+
2ETx-TRD(0)-
3ERx+TRD(1)+
4TRD(2)+
5TRD(2)-
6ERx-TRD(1)-
7TRD(3)+
8TRD(3)-

MOXA V2201 Series X86 Computers-RJ45 connectors

Serial Ports
The serial ports use DB9 connectors. Each port can be configured by software for RS-232, RS-422, or RS-485. The pin assignments for the ports are shown in the following table:

MOXA V2201 Series X86 Computers-Serial Ports

PinRS-232RS-422 RS-485 (4-wireRS-485 (2-wire)
1DCDTxDA(-)TxDA(-)
2RxDTxDB(+)TxDB(+)
3TxDRxDB(+)RxDB(+)DataB(+)
4DTRRxDA(-)RxDA(-)DataA(-)
5GNDGNDGNDGND
6DSR
7RTS
8CTS

SD Slot
The V2201 has an SD slot for storage expansion. The SD slot allows users to plug in an SD 3.0 standard SD card. To install an SD card, gently remove the outer cover from the left, and then insert the SD card into the slot.
USIM Slot
The V2201 has a USIM slot for 3G/LTE wireless Internet connections. To install a USIM card, gently remove the outer cover from the left, and then insert the USIM card into the slot.
USB Hosts
The V2201 has 1 USB 3.0 and 2 USB 2.0 Type-A connectors. 2 USB 2.0 ports are located on the front panel, and 1 USB 3.0 port is on the right panel. The port supports keyboard and mouse, and can also be used to connect a Flash drive for storing large amounts of data.
Audio Interface
The audio output of the V2201 is combined with the HDMI connector.
DI/DO
The V2201 comes with 4 digital inputs and 4 digital outputs on a 2×5 terminal block.MOXA V2201 Series X86 Computers-digital inputsReset Button
Press the “Reset Button” on the left side panel of the V2201 to reboot the system automatically.
Real-time Clock
The V2201’s real-time clock is powered by a lithium battery. We strongly recommend that you do not replace the lithium battery without help from a qualified Moxa support engineer. If you need to change the battery, contact the Moxa RMA service team.
NOTE ATTENTION
There is a risk of explosion if the battery is replaced by an incorrect type of battery.

Powering on the V2201

To power on the V2201, connect the “terminal block to power jack converter” to the V2201’s DC terminal block (located on the side panel), and then connect the 9 to 36 VDC power adapter. The computer will be automatically turned on once the power adapter is plugged in. If it does not, press the Power Button to turn on the computer. Note that the Shielded Ground wire should be connected to the top pin of the terminal block. It takes about 30 seconds for the system to boot up. Once the system is ready, the Power LED will light up.

Connecting the V2201 to a PC

Power on the V2201 computer after connecting a monitor, keyboard, and mouse, and verifying that the power source is ready. Once the operating system boots up, the first step is to configure the Ethernet interface. The factory default settings for the V2201’s LANs are shown below (W7E uses DHCP).

Default IP AddressNetmask 
LAN 1 192.168.3.127255.255.255.0
LAN 2 192.168.4.127255.255.255.0

Configuring the Ethernet Interface

Linux users should follow these steps:
If you use the console cable to configure network settings for the first time, use the following commands to edit the interfaces file:
#ifdown –a
//Disable the LAN1~LAN2 interface first, before you reconfigure the LAN settings. LAN1 = eth0, LAN2 = eth1//#vi /etc/network/interfaces //check the LAN interface first//
After the boot setting of the LAN interface has been modified, use the following commands to immediately activate the LAN settings:
#sync; ifup –a
W7E users should follow these steps:
STEP 1: Go to Start → Control Panel → Network and Internet → View network status and tasks → Change adapter setting.
STEP 2: In the Local Area Connection Properties screen, click Internet Protocol (TCP/IP) and then select Properties. Select Internet Protocol Version 4, and then click Properties.
STEP 3: Click OK after inputting the proper IP address and netmask.

MOXA V2201 Series X86 Computers- IP addressNOTE Refer to the V2201 user’s manuals for other configuration information.

Documents / Resources

MOXA V2201 Series X86 Computers [pdf] Installation Guide
V2201 Series, X86 Computers

References

Leave a comment

Your email address will not be published. Required fields are marked *