MOXA MXview ToGo Apps Installation Guide

MXview ToGo allows you to use your mobile devices to monitor network devices that are managed by Moxa’s MXview industrial network management software. With MXview ToGo, you can view network status and system events anytime, anywhere. When your MXview server is connected to the Internet, you can receive real-time notifications on your mobile devices. MXview ToGo enables you to respond to abnormal network events the moment they occur and helps to minimize msystem downtime

MXview ToGo Requirements

Device	Operating System	Storage
iPhone	iOS 8.0 or later	20 MB
Android phone/tablet	Android 4.0.3 or later	20 MB

MXview Server Requirements

MXview version 2.6 or later
Internet connection for push notifications

Installation

Install and configure MXview on a server in your network. For more information, see the documentation that comes with MXview.
On your mobile device, download and install MXview ToGo from the Apple App Store or Google Play.

Logging In

On the Login page, enter the following information and click Log In to log in to MXview ToGo and connect to your MXview server.

IP address of your MXview server

Username
Password

Tip: To try MXview ToGo without connecting to an MXview server, enable Demo Mode.

Logging Out

To log out of MXview ToGo and disconnect from your MXview server, tap More > Settings > Log Out.

MXview ToGo Functions

In this section, we describe the functionality provided by the five buttons at the bottom of the MXview ToGo panel:

Dashboard
Network

Event
Scan

More
⮚ Settings
⮚ Network Topology

1. Dashboard

The Dashboard page displays the number of monitored devices for the following network statuses:

Normal: Devices are operating normally.

Warning: Devices are operating but with warning status.
Critical: Devices are operating with critical issues or may not be operating. Immediate attention is required.

Tap a number to view devices with a Warning or Critical status.

2. Network

The Network page displays network groups and devices on your MXview network.

To view detailed device information, tap a device.

Swipe left to view detailed information pages for a device.

• Device Status

The Device Status page displays basic device information (such as IP address and firmware version).

To locate a device, tap .

To contact the administrator of a managed device, tap . NOTE You can set the administrator contact information on each device.

• Event List

You can view the latest 100 event logs for a device on the Event List page.

To view detailed log information, tap an event.

• Device Properties

The Device Properties page displays detailed device information on the MXview server.

• Device Port

The Device Port page displays the name and status of each port on a device.

• Port Status

You can access the Port Status page to view:

⮚ Whether a port is up or down
⮚ The information of its neighboring devices

• Port Properties

The Port Properties page displays detailed port information (such as the port number and speed).

3. Event

The Event List page displays the latest 100 event logs for all devices on the MXview server.

4. Scan

To view the status of a device on MXview ToGo, use the Scan page to scan the QR code on a Moxa device managed by the MXview server. The Device Status page is displayed.

5. Settings

Use the Settings page to configure notification and logout settings.

Notification Settings: Enter your email address, which you can use to configure push notifications on the MXview server.

Log Out Settings: Configure the default session inactivity timeout (between 10 to 60 minutes).

6. Network Topology

You can see whole network topology with physical connections which are identical to the topology in MXview server. By double-tapping on the screen, you can easily zoom in on the topology. By tapping on the devices, you can check the device’s detailed information.

Documents / Resources

MOXA MXview ToGo Apps [pdf] Installation Guide
MXview ToGo Apps, MXview ToGo, Apps

References

User Manual

MXview ToGo Apps

Overview