motionics WiMER2 Wireless Measurement Read

Important Notes

• Turn off the device after use. it will Not turn off automatically.
• Do NOT open the device. Opening causes permanent damage and voids the warranty.

Description

1. 10-Pin Connector – connects to data cable
2. Tri-Color LED
    – Device is on
     – Device is in charge
   – Device is fully charged
3. USB Port – connects to USB cable to charge
4. on/off Button– push on and push off
5. Trigger Connector – 2.5 mm audio port, connects to trigger switch

Product Page

Included in the box

• WiMER2 Base 1X
• Trigger Switch 1X
• USB Charging Cable 1X
• USB Power Adapter 1X
• User Guide 1X

Compatible Software

• iOS: MultiGage Reader (download for FREE from the App Store)
• Android: MultiGage Reader (download for FREE from the Play Store)
• Windows: MultiGage Reader (BLE dongle required, download for FREE from www.motionics.com Go to Resources > Download > Software)

MultiGage Reader App iPhone/iPad

MultiGage Reader APP Android

Quick Start

• Turn on WiMER2 and connect to Fowler Test Indicator.
• Plug in USB Bluetooth dongle if using Windows PC.
• Run one of the aforementioned Apps/software.
• In the main page, tap Pair button to bring up a new pairing page.
• Wait for the software to finish scanning nearby devices , select WiMERXXX tp connect.
• Connection may take a few seconds , one paired , instrument readings show in the software.

Motionics, LLC
© 2023 Motionics, LLC
www.motionics.com
All Rights Reserved.
info@motionics.com
Made in the U.S.A.

Documents / Resources

	motionics WiMER2 Wireless Measurement Read [pdf] User Guide WiMER2 Wireless Measurement Read, WiMER2, Wireless Measurement Read, Measurement Read, Read
	motionics WiMER2 Wireless Measurement Read [pdf] User Guide WiMER2 Wireless Measurement Read, WiMER2, Wireless Measurement Read, Measurement Read, Read

References

• User Manual