motionics WiMER1+ Wireless Measurement Read

Important Notes

• Turn off the device after use. It will NOT turn o! automatically.
• Do NOT open the device. Opening causes permanent damage and voids the warranty.

Description

1. 10-Pin Connector – connects to Mitutoyo Digimatic data cable
2. Tri-Color LED
   Device is on
   Device is charging
   Device is fully charged
3. USB Port – connects to USB cable to charge
4. On/Off Button push on and push off.
5. Trigger Connector – 2.5 mm audio port, connects to trigger switch
6. Antenna – increases WiMER1+ Range
   

Product Page

Included in the box

• WiMER1+ Base 1X
• External Antenna 1X
• Trigger Switch 1X
• USB Charging Cable 1X
• USB Power Adapter 1X
• User Guide 1X

Compatible Software

• iOS: MultiGage Reader (download for FREE from the App Store)
• Android: MultiGage Reader (download for FREE from the Play Store)
• Windows: MultiGage Reader (BLE dongle required, download for FREE from www.motionics.com Go to Resources > Download > Software)

MultiGage Reader App iPhone/iPad

MultiGage Reader APP Android

Quick Start

• Install external antenna on WiMER1+.
• Turn on WiMER1+ and connect to Mitutoyo instruments.
• Plug in USB Bluetooth dongle if using Windows PC.
• Run one of the aforementioned apps/software.
• In the main page, tap Scan/+ button to bring up a new pairing page.
• Wait for the software to finish scanning nearby devices, select WIMERXXX to connect.

Customer Support

Motionics, LLC © 2023 Motionics, LLC
www.motionics.com

info@motionics.com
Made in the U.S.A.

Documents / Resources

motionics WiMER1+ Wireless Measurement Read [pdf] User Guide WiMER1, WiMER1 Wireless Measurement Read, Wireless Measurement Read, Measurement Read, Read

References

• User Manual