motionics WiMER1 Wireless Vibration Analyzer User Guide

Important Notes

• Turn off the device after use. It will NOT turn off automatically.
• Do NOT open the device. Opening causes permanent damage and voids the warranty.

Description

1. Pin Connector – connects to Mitutoyo Digimatic data cable
2. Tri-Color LED –
    Device is on
   Device is in charge
   Device is fully charged
3. USB Port-connects to USB cable to charge
4. On/Off Button – push on and push off
5. Trigger Connector – 2.5 mm audio port, connects to trigger switch

Product Page

Included in the box

• WiMER1 Base 1X
• Trigger Switch 1X
• USB Charging Cable 1X
• USB Power Adapter 1X
• User Guide 1X

Compatible Software

iOS: Multi Gage Reader (download for FREE from the App Store)
Android: Multi Gage Reader (download for FREE from the Play Store)
Windows: MultiGage Reader (BLE dongle required, download for FREE from www.motionics.com Go to Resources > Download > Software)

Multi Gage Reader App iPhone/iPad

Multi Gage Reader APP Android

Quick Start

• Turn on WiMER1 and connect to Mitutoyo instruments.
• Plug in USB Bluetooth dongle if using Windows PC.
• Run one of the aforementioned apps/software.
• In the main page, tap Scan/+ button to bring up a new pairing page.
• Wait for the software to finish scanning nearby devices, select WIMERXXX to connect.
• Connection may take a few seconds, once paired, instrument reading shows in the software.

Motionics, LLC
© 2023 Motionics, LLC
www.motionics.com
All Rights Reserved.
info@motionics.com
Made in the U.S.A.

Documents / Resources

motionics WiMER1 Wireless Vibration Analyzer [pdf] User Guide WiMER1 Wireless Vibration Analyzer, WiMER1, Wireless Vibration Analyzer, Vibration Analyzer, Analyzer

References

• User Manual