MOKO SMART N2 SoftFoam Asset Tag User Manual

The battery is replaceable and rechargeable with a default
lifetime of 14 months. To extend battery life, adjust the
advertising interval and Tx Power settings based on your use
case.

4. Application:

The tag is suitable for asset management, shipment tracking,
exhibitions, and smart office scenarios.

FAQ:

Q: How can I get more information about the functions of the N2
SoftFoam Asset Tag?

A: For more details, please contact MOKO sales staff to obtain
the relevant IN100 Solution Beacon User Guide.

“`

View Fullscreen

N2
SoftFoam Asset Tag
Product Specification
N2 SoftFoam Asset Tag
Version 2.0
MOKO TECHNOLOGY LTD.

Revision History

N2 SoftFoam Asset Tag Specification V2.0

Version Data V1.0 Dec 26, 2024 V2.0 Feb 13, 2025

Notes Initial version Update default parameters and lifespan evaluation time.

Contributor(s) Leo Leo

About document
This product specification was designed to help users to know the hardware overview and basic instructions of N2 SoftFoam Asset Tag product. Through this document, users will be initial to understand the application scenarios, hardware specifications, basic instructions of product.

N2 SoftFoam Asset Tag Specification V2.0
Table of Contents
1. Overview ……………………………………………………………………………………………………………………………. 2 2. General specifications ……………………………………………………………………………………………………………3
2.1 N2 SoftFoam Series Tag specifications …………………………………………………………………………………………………….3 2.2 Battery consumption …………………………………………………………………………………………………………………………….4 2.3 Mechanical Drawings ………………………………………………………………………………………………………………………….. 4 3. Basic instructions …………………………………………………………………………………………………………………. 5 3.1 How to power ON/OFF the tags? ……………………………………………………………………………………………………………5 3.2 How to confirm the tag is powered on? …………………………………………………………………………………………………..5 3.3 NanoBeacon info broadcast format description ……………………………………………………………………………………….6 4. Advertising Data Configuration ……………………………………………………………………………………………… 7
1 Copyright © 2025 MOKO TECHNOLOGY LTD.

N2 SoftFoam Asset Tag Specification V2.0
1. Overview
This Product specification is mainly applicable for MOKO N2 SoftFoam Asset Tag product, and mainly contained below parts:
General specifications Basic instructions For more information about user guidance of product functions and configuration APP, please ask our sales team directly for official document “IN100 Solution Beacon User Guide”.
2 Copyright © 2025 MOKO TECHNOLOGY LTD.

N2 SoftFoam Asset Tag Specification V2.0

2. General specifications

2.1 N2 SoftFoam Series Tag specifications

Model Physical Specification

General specifications

Dimensions(L*W*H)

51mm*30.5mm*3mm

Weight

4.7g

Material

Outer Surface (PVC) SoftFoam (EVA)

Color

Sensor LED
Hardware Specification Button
NFC Power activation

Structural Specification

Operating temperature Storage temperature Operating humidity Installation mode

Battery

Battery Specification

Replaceable Rechargeable Lifetime

Bluetooth version

Bluetooth range Advertising feature

Bluetooth feature*

Connectivity

Configure parameters

OTA

Outer Surface (White) SoftFoam (Black) No No No No Peeling off the release paper -20°C ~ 60°C 0°C ~ 25°C 20% ~ 90% Sticker
85mAh
No No 14 months (Default setting*) Bluetooth LE 5.0 and 5.3 compatible 160m (open area) Support up to 2 advertising slots Unconnectable Advertising type: iBeacon, Eddystone(UID/TLM), NanoBeacon info Tx Power(dBm): -30/ -20/ -16 /-11 /-7 /-4 / 0/ +4 Advertising interval: 100ms ~ 20000ms Not Support configure after delivery
No

Application scenarios Asset management; Shipment tracking; Exhibitions; Smart office

Table 1: General specifications of N2 SoftFoam Asset Tag ———————————————————————————————————————————————————–

Default setting*: The N2 SoftFoam asset Tag lifetime estimated based on standard working mode under 25°C conditions. (NanoBeacon info | 0dBm Tx Power | 3000ms ADV interval | Continuous broadcast)

Bluetooth feature*: If you want to know more about the functions of the N2 SoftFoam asset tag, please contact MOKO sales staff to get the relevant IN100 Solution Beacon User Guide.

N2 SoftFoam Asset Tag Specification V2.0

2.2 Battery consumption

Here we have described battery consumption in some common configurations which refer to different use cases. You can refer to below table to create the use case and estimate battery lift time.

Advertising interval 100ms 100ms 500ms 500ms 1000ms 1000ms 3000ms 3000ms 5000ms 5000ms
10000ms 10000ms

N2 SoftFoam Asset Tag battery consumption

Tx Power

Consumption (uA)

Life time (months)

0dBm

134

0.6

4dBm

182

0.5

0dBm

28.5

4dBm

38.8

2.5

0dBm

15.1

4dBm

20.2

4.5

0dBm

6.2

14(Default setting)

4dBm

7.6

0dBm

4dBm

5.1

0dBm

2.6

4dBm

3.1

Table 2: Battery consumption in different conditions

2.3 Mechanical Drawings

N2 SoftFoam Asset Tag Specification V2.0
3. Basic instructions
3.1 How to power ON/OFF the tags?
The N2 SoftFoam Asset Tag supports Powered on by peeling off the release paper on the back of the product (which has a layer of conductive adhesive attached to it). You can refer to below operation flow to power on/off device. powered on by peeling off the release paper:
Power ON: Peel off the release paper on the back of the product to power on the device. Power OFF: Once product powered on, it does not support powering off again.
3.2 How to confirm the tag is powered on?
You can determine if the device is operational by using the BeaconX Pro app to scan for its broadcast. If the broadcast from the tag’s specified MAC address is detected, it indicates the device is powered on. If no broadcast is detected after an extended period of scanning, it can be inferred that the device is not yet powered on. Here is the process for powering on N2 and verifying its operational status. Step1. Open the BeaconX Pro app, with app version V2.0.7 or higher, and select the “NanoBeacon series”, then you will enter the scanning page.
Step2. Power on the Tag. powered on by peeling off the release paper: Peel off the release paper on the back of the product to power on
the device. Step3. Click on “Edit Filter” to enter the scan filter page. Choose the QR code scanning function and use your phone camera to scan the QR code on the Tag. The QR code contains the MAC address information of Tag. Once the QR code is successfully recognized, the MAC address information of this device will automatically populate the scan filter box. Click ‘Apply’ and wait for a moment. If the app’s scan page detects the broadcast information from the corresponding device, it indicates that the device has been successfully powered on and is operating normally.
5 Copyright © 2025 MOKO TECHNOLOGY LTD.

N2 SoftFoam Asset Tag Specification V2.0

3.3 NanoBeacon info broadcast format description
The Default setting of the N2 SoftFoam Asset Tag are as follows:
SLOT1
Adv type –NanoBeacon (MOKO Custom) Adv interval — 3000ms Adv Tx Power — 0dBm Adv mode — Continuous

Offset 0 1 2-6 7 8 9 – 10 11 12
13 – 14
15 – 18
19 20-25

Field Data length Data type Device name Data length Data type Manufacturer ID Adv type Battery voltage
Beacon temperature
SEC_CNT
Fixed value MAC address

Advertisement Data (NanoBeacon)

Example value

Descriptions

0x06

AD length of Flags content

0x09

AD type: Flags

0x4e 42 54 41 47

Device name : NBTAG

0x12

AD length of NanoBeacon content

0xff

Manufacturer Spec

0x05 05

Manufacturer ID

0x00

0x00 — Normal Adv type

0x60

(Little-endian), uint: 0.03125V Content Parse: 0x60 >>>96 — > 96×0.03125V = 3V

0x30 0A

(Little-endian), uint: 0.01 Content Parse: 0x0A 30>>>2610 — > 2610×0.01 = 26.1

0x8B 7C 3B 00

(Little-endian), SEC_CNT is a 1 second resolution counter that represents time since beacon power-up or reboot. If this value is reset (e.g. on a reboot), the ADV count field must also be reset. 4 bytes, Content parse: 0x00 3B 7C 8B>>>3,898,507, that is 3,898,507s

0xDD

0xDD — no alarm

0x46 4D A3 71 3E FF

(Little-endian), Content parse: Beacon MAC address: FF:3E:71:A3:4D:46

N2 SoftFoam Asset Tag Specification V2.0
4. Advertising Data Configuration
The hardware based on the IN100 chip solution support configure the advertising data and advertising parameters of the Bluetooth beacon according to customer’s application requirements through the configuration tool to achieve the purpose of different broadcast functions. MOKO can also provide pure hardware equipment, which can be configured by the customer, or MOKO can configure the parameters as customer’s requirements for verification. The GUI of the configuration tool is shown in the below picture.
Note: 1. The broadcast parameters of the device can be configured only once before the device leave the factory, and cannot be configured again after the device leave the factory The Bluetooth beacon supports configure the following functions and parameters: The Bluetooth beacon supports up to two advertising slots sets which means beacon can broadcasts different
advertising packets separately. The Bluetooth beacon supports two commonly used advertising data formats.
iBeacon: Apple proprietary Beacon advertising frame format based on Bluetooth standard advertising (The parameters of UUID/ Major/ Minor/ Measured Tx Power in the iBeacon data format support configure)
Eddystone(UID/TLM): Google proprietary Beacon advertising frame format based on the service data of the Bluetooth standard advertising.
Custom: the advertising data in a custom user-defined format as customer’s application requirements
7 Copyright © 2025 MOKO TECHNOLOGY LTD.

N2 SoftFoam Asset Tag Specification V2.0
© Copyright 2025 MOKO TECHNOLOGY. All Rights Reserved. Any information furnished by MOKO TECHNOLOGY LTD. is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of MOKO TECHNOLOGY LTD. materials or products rests with the end user since MOKO TECHNOLOGY LTD. cannot be aware of all potential uses. MOKO TECHNOLOGY LTD. makes no warranties as to non-infringement nor as to the fitness, merchantability, or sustainability of any MOKO TECHNOLOGY LTD. materials or products for any specific or general uses. MOKO TECHNOLOGY LTD. or any of its affiliates shall not be liable for incidental or consequential damages of any kind. All MOKO TECHNOLOGY LTD. products are sold pursuant to the MOKO TECHNOLOGY LTD. Terms and Conditions of Sale in effect from time to time, a copy of which will be furnished upon request. Other marks may be the property of third parties. Nothing herein provides a license under any MOKO TECHNOLOGY LTD. or any third-party intellectual property right.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Contact
MOKO TECHNOLOGY LTD. An original manufacturer for IoT smart devices
Address: 4F, Building 2, Guanghui Technology Park, MinQing Rd, Longhua, Shenzhen, Guangdong, China E-mail: Support_BLE@mokotechnology.com Website: www.mokosmart.com
8 Copyright © 2025 MOKO TECHNOLOGY LTD.

Documents / Resources

MOKO SMART N2 SoftFoam Asset Tag [pdf] User Manual
2AO94-N2, 2AO94N2, N2 SoftFoam Asset Tag, N2, SoftFoam Asset Tag, Asset Tag, Tag

References

User Manual

MOKO SMART N2 SoftFoam Asset Tag User Manual

N2 SoftFoam Asset Tag

Product Specifications:

General Specifications:

Hardware Specification:

Battery Specification:

Bluetooth Features:

Application Scenarios:

Product Usage Instructions:

1. Activation:

2. Connectivity:

3. Battery:

4. Application:

FAQ:

Q: How can I get more information about the functions of the N2
SoftFoam Asset Tag?

Documents / Resources

References

Leave a comment

Cancel reply