ഡാറ്റ ഫ്രോഗ് P03 വയർലെസ് കൺട്രോളർ

ഉപയോക്തൃ മാനുവൽ

The wireless controller features various functionalities including Turbo Burst, programmable back keys, 6-axis gyro, 3 levels of vibration, deadzone adjustment, and calibration.

മുൻകരുതലുകൾ

• Avoid extreme tempe ratu res, humidity, or physical impact; do not disassemble the p roduct .
• For long-term sto rage, cha rge the battery at least once every month to maintain performance
• In case of malfunction, press and hold the HOME button for 5 seconds to reset, or use t he reset key on the bac k of the controller.

പാക്കേജ് ഉള്ളടക്കം

• Game Controller x 1
• ഉപയോക്തൃ മാനുവൽ X 1
• യുഎസ്ബി ചാർജിംഗ് കേബിൾ x 1

ഉൽപ്പന്ന സവിശേഷതകൾ

• Wide Compatibility: Supports PS4, PS3, PC, Android, iOS, and Steam Deck.
• Dual-mode Connection: Connect wirelessly via Bluetooth to a PS4 console or use a data cable for wired con nection.
• വിപുലമായ പ്രവർത്തനങ്ങൾ:
  – Turbo Burst (manual/auto mode, supports custom settings for 12 keys).
  – Cool RGB lighting (four brightness levels, multiple modes available).
  – Dual-back key macro programming (supports mapping multiple key functions).
  – Six-axis gyroscope for precise control, three levels of vibrati on intensity.
  – Joystick dead-zone mode switch, supports joystick calibrati on.

ഉൽപ്പന്നം കഴിഞ്ഞുview

P03 controller is a multi-functional game controller compatible with PS4, PS3, PC, Android, iOS, and Steam Deck. It supports both wireless and wired connection modes. Featuring a PS4-standard button layout, it integrates advanced functions such as Turbo Burst, RGB lighting, six-axis gyroscope, and vibration feedback, providing an immersive gaming experience.

Button Layout Diagram

കണക്ഷൻ ഗൈഡ്

The P03 Bluetooth gamepad has extensive compatibility and can be connected to a variety of platform devices. The specific operations are as follows.

PS4 Console Connection

വയർഡ് കണക്ഷൻ

1. The controller to PS4 via USB cable
2.Press the PS (HOME) button to establish connecti

വയർലെസ് കണക്ഷൻ

1. Complete initial wired pairing as above
2. Disconnect USB cable
3. Press PS (HOME) button to reconnectwirelessly

Note: Requires < 10 m operating distance from console

മൾട്ടി-പ്ലാറ്റ്ഫോം കണക്ഷനുകൾ

ഇല്ല.	അനുയോജ്യമായ പ്ലാറ്റ്ഫോമുകൾ	പിന്തുണയ്ക്കുന്ന മോഡുകൾ	Wired/Bluetooth Connection Operations
1	PS5 Console (P03 can only be used to play PS4 disc games on the  PSS console and cannot be used to play PSS games.)	Wired /Wireless	Wired: Use a USB data cable to directly connect to the PSS console, and press the “PS” button to connect in wired mode.
			Wireless: After a successful wired connection, unplug the USB data cable and press the “PS” button to reconnect to the PSS console.
2	PC (Desktop/Lap- top)	Wired /Wireless	Compatible Systems: Windows 11, Windows 10, Windows 7.
			Wired: Use a USB data cable to directly connect to the computer.
			Wireless: Press and hold the �SHARE” button and the “PS” button simultaneously for 5 seconds to turn on Bluetooth connection.
3	PCX-INPUT	വയർഡ്	Press and hold the “SHARE” button and the “OPTIONS” button simultaneously for4 seconds to switch to X-input mode.
4	ആവി	Wired /Wireless	Wirea: Use a USB aata caDie to airect1y connect to tne computer, and open the Steam platform to use.
			Wireless: Press and hold the “SHARE” button and the “PS” button simultaneously for 5 seconds to turn on Bluetooth connection with 4.0/5.0 Bluetooth devices, and open the Steam platform to use.
5	Android 10-ഉം അതിനുമുകളിലും	Wired /Wireless	Wired: Use an OTG adapter to directly connect the gamepad to the devic@via a data   able.
			Wireless: Press and hold the “SHARE” button and the “PS” button simultaneouslv for 5 seconds to turn on Bluetooth search and connect.
6	iOS 13-ഉം അതിനുമുകളിലും	വയർലെസ്	Press and hold the “SHARE” button and the “PS” button simultaneouslv for 5 seconds to turn on Bluetooth search and connect.
7	PS3 കൺസോൾ	വയർഡ് /വയർലെസ്	Wired: Use a USB data cable to directlv connect to the PS3 console.
			Wireless: After a successful wired connection, unplug the USB data cable and oress the “PS” button to reconnect to the PS3 console.
8	8BitDo Wireless Device	വയർലെസ്	Press and hold the “SHARE” button and the “PS” button simultaneously for 5 seconds to tum  on Bluetooth search and connect

 

Advanced Function Details

1. Turbo Burst Function

• Manual Burst: Press and hold M + target key (e.g., O).
• Auto Burst: While holding the target key in manual burst mode, press it again.
• Disable Burst: Press and hold M + active burst key.
• Clear All Bursts: Press and hold M + OPTIONS; the controller vibrates to confirm.
• Adjust Burst Speed:
  Press and hold M + move the left joystick up/down to adjust speed (5/12/25 rounds per second ).
  Speed corresponds to light flas hing: s low flas h (5 rounds) ➔ medium flash (12 rounds)➔ fast flas h (25 rounds

2. Vibration Intensity Adjustment
Hold L1 + Rl + L2 + R2 for 1.5 seconds to cycle th rough th ree levels of intensity (0o/o/50%/100%).

3. Back Key Mapping Function

Fu nction of Back Keys : T he ML and MR back keys on the cont roller can replicate other key functions, making operations more convenient.

• സജ്ജീകരണ ഘട്ടങ്ങൾ:
• Enable: Press and hold the M key and the back key you want to set (e .g., M + MR) . T he controller vibrates and the light flashes slowly, entering setup mode.
  – Select Key: Press the key whose function you want to co py (e .g., A, B, e tc.), or multiple keys (e.g., A+B+X). Each p ress inc reases the light flashing speed .
  – Confi rm: Once the light flashes quickly, press the bac k key you sta rted with (e.g., MR} to confirm.
  - ഉദാample : To map A, B, and X to MR, fi rst p ress M + MR to enter mode, then press A, B, and X, followed by MR to confirm.
  – Clear Settings: Hold the M key for 5 seconds; the con troller vibrates and the light flashes red, clearin g all back key func tions and restor in g them to their initi al state

4. RGB Lighting Adjustment

• Mode Swi tching: Press SHARE+ OPTIONS.
• Brightness Adjustment: Press and hold M + move the r ight joystick up/down to adjust four brightness levels (25%/50%/75%/100%) .
• Turn Off Lights: Hold SHARE+ R3.

5. Joystick Calibration & Dead-Zone Settings

• Calibration (requires cont roller to be in sleep mode):
  Press and hold/’:,+ 0 + HOME; the RGB light cycles through red, green, and blue.
  Rotate the joysticks 3 times each, then press x; the lights turn off to confirm completion .
• Dead-Zo ne Mode: Press and hold M + L3/R3 for 2 seconds to toggle between no- dead- zone mode (green light) and default mode (blue light). Note: Se ttings ar e not sa ved a fter power off; default mode is active.

6. Reset to Factory Settings

In the off state, hold L3 + R3 + HOME; the RGB light turns red for 1 second before resetting.

സാങ്കേതിക സവിശേഷതകൾ

• ഇൻപുട്ട് വോളിയംtagഇ/നിലവിലെ: N/A
• പ്രവർത്തന സമയം: ബാധകമല്ല
• ഭാരം: N/A
• അളവുകൾ: N/A
• വയർലെസ് ശ്രേണി: 10 മീറ്റർ

---

പതിവുചോദ്യങ്ങൾ

ചോദ്യം: വ്യത്യസ്ത പ്ലാറ്റ്‌ഫോമുകളിലേക്ക് കൺട്രോളർ എങ്ങനെ ബന്ധിപ്പിക്കും?

A: For wired connections, use a USB cable and press the corresponding button. For wireless connections, unplug the USB cable after initial connection and press the designated button.

ചോദ്യം: കൺട്രോളറിന്റെ പരമാവധി വയർലെസ് ശ്രേണി എത്രയാണ്?

A: The wireless range of the controller is 10 meters.

ചോദ്യം: കൺട്രോളറിലെ RGB ലൈറ്റിംഗ് എങ്ങനെ ക്രമീകരിക്കാം?

A: To switch between RGB modes, press SHARE + OPTIONS. Adjust brightness using M + right stick up or down. To turn off RGB lighting, hold SHARE and press R3.

പ്രമാണങ്ങൾ / വിഭവങ്ങൾ

ഡാറ്റ ഫ്രോഗ് P03 വയർലെസ് കൺട്രോളർ [pdf] ഉപയോക്തൃ മാനുവൽ P03 വയർലെസ് കൺട്രോളർ, P03, വയർലെസ് കൺട്രോളർ, കൺട്രോളർ

റഫറൻസുകൾ

• ഉപയോക്തൃ മാനുവൽ