ATOMSTACK P9 M50 ലേസർ എൻഗ്രേവർ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

The ATOMSTACK P9 M50 is a portable and professional laser engraver designed for various materials including wood, leather, metal, and more. This manual provides essential information for safe operation, setup, and maintenance of your device, ensuring optimal performance and longevity.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: Laser radiation can cause eye damage and skin burns. Always follow safety guidelines to prevent injury.

• നേത്ര സംരക്ഷണം: The laser module includes a protective cover. While this cover helps, it is highly recommended to wear additional laser safety goggles (not included) during operation to ensure maximum eye protection.
• അടിയന്തരമായി നിർത്തുക: Familiarize yourself with the emergency stop button. In case of any unexpected situation, press this button immediately to halt all machine operations. Rotate the button to disengage it before restarting.
• വെൻ്റിലേഷൻ: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting. Consider using an exhaust system.
• മെറ്റീരിയൽ സുരക്ഷ: Do not engrave or cut unknown materials. Some materials can produce toxic fumes or catch fire. Always verify material compatibility and safety data.
• മേൽനോട്ടം: Never leave the machine unattended during operation. Stay within close proximity to monitor the process.
• കുട്ടികളും വളർത്തുമൃഗങ്ങളും: Keep children and pets away from the operating area and the machine at all times.

Figure 2.1: Emergency Stop Button and Control Panel. The red button is the emergency stop, the silver button is On/Off, and the small button is Reset.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1 x ATOMSTACK P9 M50 Laser Engraving Machine
• Parts for screw assembly (steps 2/3/4/5)
• 1 x Anti-dust cloth
• 1 x Tool set
• 1 x Fixed focus film
• 3 x Acrylic panels
• 3 x Wood chips
• 1 x കാർഡ് റീഡർ
• 5 x കേബിൾ ബന്ധങ്ങൾ
• 1 x Accessory package
• 1 x Display assembly
• 1 x Display cable
• 1 x പവർ അഡാപ്റ്റർ
• 1 x പവർ കേബിൾ
• 1 x ഡാറ്റ കേബിൾ
• 1 x Metal cutting support plate
• 1 x മാനുവൽ
• 1 x Laser assembly
• 1 x X-axis assembly
• 1 x Y-axis assembly
• 2 x സപ്പോർട്ട് അടി
• 4 x Mounting spacers

4. സജ്ജീകരണ ഗൈഡ്

The ATOMSTACK P9 M50 comes 85% pre-assembled, simplifying the setup process. Follow these steps to prepare your engraver for use:

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove all components from the packaging and place them on a clean, stable surface.
2. ഫ്രെയിം അസംബ്ലി: Connect the X-axis and Y-axis assemblies as per the included manual's diagrams. Secure them using the provided screws and tools. Ensure all connections are firm.
3. ലേസർ മൊഡ്യൂൾ ഇൻസ്റ്റാളേഷൻ: Mount the laser assembly onto the X-axis carriage. Ensure it is securely fastened and the cables are properly connected.
4. പിന്തുണ അടി: Attach the two support feet to the base of the machine for stability.
5. നിയന്ത്രണ ടെർമിനൽ: Connect the independent control terminal to the main unit using the display cable. The terminal features a magnetic adsorption design for easy attachment.
6. പവർ കണക്ഷൻ: Connect the power adapter to the machine and then plug it into a suitable power outlet (100-240V AC, 50/60Hz).
7. ഡാറ്റ കണക്ഷൻ: For computer control, connect the machine to your computer using the provided USB data cable. Alternatively, you can use a TF card for offline operation.

Figure 4.1: Assembled ATOMSTACK P9 M50 Laser Engraver.

Figure 4.2: Independent Control Terminal connection.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 സോഫ്റ്റ്‌വെയർ ഇൻസ്റ്റാളേഷനും കണക്ഷനും

The ATOMSTACK P9 M50 is compatible with popular laser engraving software:

• ലേസർജിആർബിഎൽ: Supports Win XP/Win 7/Win 8/XP/Win 10.
• ലൈറ്റ് ബേൺ: Supports Win XP/Win 7/Win 8/XP/Win 10 and Mac systems.

Download and install your preferred software from the official websites. Connect the engraver to your computer via USB. Follow the software's instructions to establish a connection and begin your projects.

Figure 5.1: Software Compatibility and Connection.

5.2 Offline Engraving

The P9 M50 supports offline engraving via its independent control terminal and TF card, allowing operation without a continuous computer connection.

1. Prepare your engraving file (NC, BMP, JPG, PNG, DXF) using your chosen software.
2. സംരക്ഷിക്കുക file to a TF card.
3. Insert the TF card into the slot on the control terminal.
4. Use the terminal's interface to select and start your engraving project.

Figure 5.2: Independent Control Terminal for Offline Engraving.

5.3 Fixed Focus Laser

The P9 M50 features a fixed-focus laser, eliminating the need for manual focus adjustment. This design ensures consistent precision and high energy density for both engraving and cutting tasks.

Figure 5.3: Fixed Focus Laser Technology.

5.4 പിന്തുണയ്ക്കുന്ന മെറ്റീരിയലുകൾ

The ATOMSTACK P9 M50 can engrave and cut a wide range of materials:

Figure 5.4: Dual Compression Spot Coupling Technology for Cutting.

6. പരിപാലനം

Regular maintenance ensures optimal performance and extends the lifespan of your ATOMSTACK P9 M50. Perform these tasks periodically:

• ലേസർ ലെൻസ് വൃത്തിയാക്കുക: Periodically clean the laser lens with a soft, lint-free cloth and a specialized lens cleaning solution to maintain engraving precision and laser power.
• Clean the Work Area: Remove debris, dust, and residue from the engraving area after each use to prevent interference with the laser path and machine movement.
• ചലിക്കുന്ന ഭാഗങ്ങൾ ലൂബ്രിക്കേറ്റ് ചെയ്യുക: Apply a small amount of appropriate lubricant to the guide rails and lead screws as needed to ensure smooth and precise operation of the machine's axes.
• കേബിളുകൾ പരിശോധിക്കുക: Regularly check all power and data cables for signs of wear, fraying, or damage. Replace any damaged cables immediately to prevent electrical hazards.

7. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your ATOMSTACK P9 M50.

8 സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the ATOMSTACK P9 M50 Laser Engraver:

ചിത്രം 8.1: ഉൽപ്പന്ന അളവുകളും പ്രധാന സവിശേഷതകളും.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the official ATOMSTACK webസൈറ്റിൽ ബന്ധപ്പെടുക അല്ലെങ്കിൽ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

ഓൺലൈൻ ഉറവിടങ്ങൾ:

• Visit the official ATOMSTACK store on Amazon: ATOMSTACK Official Store
• For software support, visit the official webസൈറ്റുകൾ ലേസർജിആർബിഎൽ ഒപ്പം ലൈറ്റ് ബേൺ.