ഗ്രോവാട്ട് SPH 5000TL3 BH UP VDE അംഗീകൃത ഹൈബ്രിഡ് ഇൻവെർട്ടർ യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Growatt SPH 5000TL3 BH UP Hybrid Inverter. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

The compact Growatt SPH 5000TL3 BH UP inverter features a maximum PV power of 7500 W and a 2 MPP tracker. It boasts a maximum efficiency of 97.2%. The OLED touchscreen allows for simple and modern operation. The device offers 24-hour self-consumption monitoring and is suitable for photovoltaic installations in residential settings.

പ്രധാന സവിശേഷതകൾ:

• 100% three-phase unbalanced output
• Intelligent phase-level power export limitation
• Wide battery voltagഇ ശ്രേണി: 100-550 വി
• UPS function, 10ms transition
• VPP ഇന്റർഫേസ് തയ്യാറാണ്

2 സുരക്ഷാ വിവരങ്ങൾ

പ്രധാനപ്പെട്ട സുരക്ഷാ നിർദ്ദേശങ്ങൾ: Read and follow all instructions carefully. Keep this manual for future reference.

• യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ മാത്രമേ ഇൻസ്റ്റാളേഷൻ നടത്താവൂ.
• എല്ലാ വൈദ്യുത കണക്ഷനുകളും പ്രാദേശിക, ദേശീയ വൈദ്യുത കോഡുകൾ പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
• Do not attempt to repair the inverter yourself. Refer all servicing to qualified service personnel.
• Disconnect all power sources before performing any maintenance or installation procedures.
• The inverter can generate high voltages and currents. Exercise extreme caution.
• ഇൻവെർട്ടറിൻ്റെ ശരിയായ ഗ്രൗണ്ടിംഗ് ഉറപ്പാക്കുക.
• Do not operate the inverter if it has been physically damaged or if any components are missing.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Growatt SPH 5000TL3 BH UP is a hybrid inverter designed for photovoltaic systems, capable of managing solar power generation, battery storage, and grid interaction. It features a robust design and an intuitive OLED touchscreen for monitoring and control.

Figure 3.1: Growatt SPH 5000TL3 BH UP Hybrid Inverter with accompanying Smart Meter and Data Logger. The inverter is a white and black rectangular unit, while the smart meter is a white rectangular device and the data logger is a black cylindrical device.

ചിത്രം 3.2: മുൻഭാഗം view of the Growatt SPH 5000TL3 BH UP Hybrid Inverter. The inverter features a prominent Growatt logo at the top, a black lower section with a green-lit OLED display and control buttons labeled 'ESC', 'OK', and arrow keys.

ഘടകങ്ങൾ:

• Inverter Unit: The main device responsible for converting DC power from solar panels to AC power for home use or grid export, and managing battery charging/discharging.
• OLED Touchscreen Display: Provides real-time operational data, system status, and allows for configuration adjustments.
• നിയന്ത്രണ ബട്ടണുകൾ: Used for navigating the menu and confirming selections on the OLED display.
• PV Input Terminals: Connections for solar panel strings.
• ബാറ്ററി ടെർമിനലുകൾ: Connections for the battery bank.
• AC Output/Grid Connection: Connection for household loads and the utility grid.
• ആശയവിനിമയ തുറമുഖങ്ങൾ: For monitoring and external device connections (e.g., RS485, CAN/USB).
• Smart Meter (Optional/Included): For precise energy measurement and export limitation.
• Data Logger (Optional/Included): For remote monitoring and data collection.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the safe and efficient operation of your Growatt SPH 5000TL3 BH UP inverter. This section provides a general overview; refer to the detailed installation guide provided with your product for specific wiring diagrams and procedures.

4.1 സൈറ്റ് തിരഞ്ഞെടുക്കൽ

• Choose a cool, dry, and well-ventilated location.
• നേരിട്ട് സൂര്യപ്രകാശം ഏൽക്കുന്നത് ഒഴിവാക്കുക.
• Ensure adequate clearance around the inverter for heat dissipation.
• Mount on a sturdy, non-flammable surface.
• The inverter is designed for indoor photovoltaic installations in residential settings.

4.2 ഇൻവെർട്ടർ ഘടിപ്പിക്കുന്നു

Securely mount the inverter to a wall using appropriate mounting brackets and hardware. Ensure it is level and firmly attached.

4.3 ഇലക്ട്രിക്കൽ കണക്ഷനുകൾ

All electrical wiring must be performed by a certified electrician in accordance with local and national electrical codes.

1. പിവി ഇൻപുട്ട് കണക്ഷൻ: Connect the DC cables from your solar panels to the PV input terminals. Ensure correct polarity.
2. ബാറ്ററി കണക്ഷൻ: Connect the battery cables to the battery terminals. Observe correct polarity and ensure the battery voltage is within the specified range (100-550 V).
3. AC Output/Grid Connection: Connect the AC output to your household electrical panel and the utility grid. This inverter supports 100% three-phase unbalanced output.
4. ഗ്രൗണ്ടിംഗ്: Ensure the inverter chassis is properly grounded.
5. ആശയവിനിമയ കണക്ഷനുകൾ: Connect the smart meter and data logger (if included) to the appropriate communication ports for monitoring and intelligent power export limitation.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed and all connections are verified, you can power on your Growatt SPH 5000TL3 BH UP inverter.

5.1 പവർ ചെയ്യുന്നു

1. Ensure all DC and AC breakers are in the OFF position.
2. Turn on the DC disconnect switch for the solar panels.
3. Turn on the battery disconnect switch.
4. Turn on the AC breaker for the inverter output.
5. The inverter will perform a self-test and then begin operation.

5.2 OLED Touchscreen Display

The OLED touchscreen provides real-time information and allows for system configuration. Use the 'ESC', 'OK', and arrow buttons to navigate the menus.

ചിത്രം 5.1: കോണാകൃതിയിലുള്ളത് view of the Growatt SPH 5000TL3 BH UP Hybrid Inverter, highlighting the OLED display and control buttons. The display shows "Hybrid" and "Normal" status.

Common Display Information:

• പിവി പവർ (W)
• Battery State of Charge (SOC %)
• Load Power (W)
• Grid Power (W) - import/export
• System Status (e.g., Normal, Fault, Standby)
• Daily/Total Energy Generation (kWh)

5.3 സിസ്റ്റം മോഡുകൾ

The inverter operates in various modes to optimize energy flow, including self-consumption, grid-tied with export, and off-grid (UPS function).

• സ്വയം ഉപഭോഗം: Prioritizes using solar power for household loads, then charging batteries, and finally exporting excess to the grid.
• Backup Mode (UPS Function): In case of grid failure, the inverter can provide power from the battery to critical loads with a 10ms transition time.
• Export Limitation: The intelligent phase-level power export limitation feature ensures compliance with local grid regulations.

6. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your Growatt inverter. Always disconnect all power sources before performing any maintenance.

• ആനുകാലിക പരിശോധന: Visually inspect the inverter and all connections for any signs of damage, corrosion, or loose wiring at least once every six months.
• വൃത്തിയാക്കൽ: Keep the inverter's ventilation openings clear of dust and debris to ensure proper airflow and cooling. Use a soft, dry cloth for cleaning the exterior. Do not use liquid cleaners.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: Check the Growatt website or contact support for available firmware updates to ensure your inverter has the latest features and bug fixes.
• ബാറ്ററി ആരോഗ്യം: If connected to a battery system, monitor battery health and perform maintenance as recommended by the battery manufacturer.

7. പ്രശ്‌നപരിഹാരം

This section provides solutions to common issues you might encounter. For problems not listed here or if issues persist, contact Growatt technical support.

8 സ്പെസിഫിക്കേഷനുകൾ

The following table outlines the key technical specifications for the Growatt SPH 5000TL3 BH UP Hybrid Inverter.

Figure 8.1: Detailed technical specifications table for the Growatt SPH 5000TL3 BH UP inverter, showing various electrical and physical parameters.

9. വാറണ്ടിയും പിന്തുണയും

9.1 വാറൻ്റി വിവരങ്ങൾ

The Growatt SPH 5000TL3 BH UP Hybrid Inverter typically comes with a 10 വർഷത്തെ വാറൻ്റി. Please refer to your purchase documentation or contact your supplier for specific warranty terms and conditions, as these may vary by region and distributor.

9.2 സാങ്കേതിക പിന്തുണ

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Growatt customer support or your authorized Growatt dealer. Have your inverter's model number (SPH 5000TL3 BH UP) and serial number ready when contacting support.

You can find more information and support resources on the official Growatt webസൈറ്റ്: www.growatt.com