Hyper 24V Go Kart Ride On

ഹൈപ്പർ ടോയ്‌സ് 24V ഗോ കാർട്ട് റൈഡ് ഓൺ യൂസർ മാനുവൽ

Model: 24V Go Kart Ride On

ബ്രാൻഡ്: ഹൈപ്പർ

1 സുരക്ഷാ വിവരങ്ങൾ

Read and understand all instructions before operating the Hyper Toys 24V Go Kart Ride On. Failure to follow safety guidelines may result in serious injury.

  • മുതിർന്നവരുടെ മേൽനോട്ടം ആവശ്യമാണ്: This product is intended for use under direct adult supervision.
  • സംരക്ഷണ ഗിയർ: Always wear a helmet and appropriate safety gear (e.g., knee pads, elbow pads) when operating the Go Kart.
  • ഭാര പരിധി: Do not exceed the maximum rider weight of 154 പൗണ്ട് (70 കി.ഗ്രാം).
  • പ്രവർത്തന ഉപരിതലം: Operate the Go Kart only on hard, flat, dry surfaces. Avoid loose dirt, sand, gravel, steep inclines, or wet conditions.
  • വിസ്തൃതമായ പ്രദേശം: Ensure the operating area is free from obstacles, traffic, and other hazards.
  • ബാറ്ററി സുരക്ഷ: Handle the battery according to instructions. Do not modify or expose to extreme temperatures.
  • യാത്രക്കാരില്ല: This Go Kart is designed for a single rider only.
Child wearing a helmet and driving the green Hyper Toys 24V Go Kart Ride On
Image 1.1: A child safely operating the Hyper Toys 24V Go Kart Ride On with a helmet.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Hyper Toys 24V Go Kart Ride On is an electric vehicle designed for recreational use on appropriate surfaces. It features multiple speed settings and a drift driving mode for an engaging experience.

പ്രധാന സവിശേഷതകൾ:

  • എളുപ്പമുള്ള പുഷ്-ബട്ടൺ പ്രവർത്തനം
  • Forward low speed: 5 mph
  • Reverse speed: 5 mph
  • Forward maximum speed: 9 mph
  • Drift driving mode
  • Realistic racing-style steering wheel
  • Durable construction with a racing bucket seat
Graphic illustrating the 24 Volt Hyper Drift-Kart features including battery power, low speed, reverse speed, and max speed
ചിത്രം 2.1: കഴിഞ്ഞുview of the Hyper Drift-Kart's power and speed capabilities.
Child riding the green Hyper Go Kart, highlighting drift driving mode, multi-speed settings, realistic steering wheel, and 154 lbs max rider weight
Image 2.2: Visual representation of key operational features and rider specifications.

3. അസംബ്ലി നിർദ്ദേശങ്ങൾ

The Hyper Toys 24V Go Kart requires some assembly before first use. Please follow these general steps. Refer to the detailed assembly manual included in the product packaging for specific diagrams and instructions.

ആവശ്യമായ ഉപകരണങ്ങൾ:

  • Wrench (size may vary)
  • സ്ക്രൂഡ്രൈവർ (ഫിലിപ്സ് ഹെഡ്)

അസംബ്ലി ഘട്ടങ്ങൾ:

  1. ഘടകങ്ങൾ അൺപാക്ക് ചെയ്യുക: പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഭാഗങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്ത് നിങ്ങളുടെ മാനുവലിലെ പാർട്സ് ലിസ്റ്റ് പരിശോധിച്ചുറപ്പിക്കുക.
  2. മുൻ ചക്രങ്ങൾ ഘടിപ്പിക്കുക: Securely attach the front wheels to the axle using the provided hardware.
  3. പിൻ ചക്രങ്ങൾ അറ്റാച്ചുചെയ്യുക: Securely attach the rear wheels to the drive axle.
  4. Install Steering Column: Insert the steering column and connect it to the steering mechanism.
  5. മൗണ്ട് സീറ്റ്: Attach the racing bucket seat to the Go Kart frame.
  6. ബാറ്ററി ബന്ധിപ്പിക്കുക: Locate the battery compartment, typically under the seat or chassis. Connect the battery terminals as instructed. Ensure connections are secure.
  7. അന്തിമ പരിശോധനകൾ: Before first use, ensure all bolts, nuts, and connections are tight and secure.
ഒന്നിലധികം views of the Hyper Toys 24V Go Kart Ride On from different angles
Image 3.1: Various perspectives of the Go Kart, useful for assembly reference.

4. Operating the Go Kart

Familiarize yourself with the controls before operating the Go Kart.

നിയന്ത്രണങ്ങൾ:

  • പവർ ബട്ടൺ: Located on the dashboard or near the steering wheel. Press to turn the Go Kart on or off.
  • ആക്സിലറേറ്റർ പെഡൽ: Located on the right footrest. Press to move forward.
  • ബ്രേക്ക് പെഡൽ: Located on the left footrest. Press to slow down or stop.
  • സ്പീഡ് സെലക്ടർ: A switch or button to select between low speed (5 mph), reverse (5 mph), and maximum speed (9 mph).
  • Drift Mode Switch: Activates the drift function, typically affecting the rear wheels for controlled sliding.

സ്റ്റാർട്ടിംഗും ഡ്രൈവിംഗും:

  1. Ensure the Go Kart is fully charged.
  2. Sit securely in the racing bucket seat.
  3. Press the power button to turn on the Go Kart.
  4. Select your desired speed setting (low, reverse, or max).
  5. Gently press the accelerator pedal to begin moving.
  6. Use the steering wheel to control direction.
  7. To activate drift mode, engage the drift mode switch while driving. This mode is best used on smooth, hard surfaces.
  8. To stop, release the accelerator and press the brake pedal.
ക്ലോസ് അപ്പ് view of the Hyper Go Kart's racing bucket seat, steering wheel, and EVA soft slick wheels
Image 4.1: Details of the Go Kart's cockpit and wheel design.

5. പരിപാലനവും പരിചരണവും

Regular maintenance ensures the longevity and safe operation of your Go Kart.

ബാറ്ററി ചാർജിംഗ്:

  • The Go Kart uses 1 Lithium Ion battery (included).
  • Always use the charger provided with the Go Kart.
  • Charge the battery fully before first use (typically 8-12 hours).
  • ബാറ്ററി അമിതമായി ചാർജ് ചെയ്യരുത്. ചാർജ് ചെയ്തുകഴിഞ്ഞാൽ ചാർജർ വിച്ഛേദിക്കുക.
  • Charge the battery after each use, even if only for a short period, to maintain battery health.
  • If storing the Go Kart for an extended period, charge the battery monthly.

വൃത്തിയാക്കൽ:

  • Wipe down the Go Kart with a damp ഓരോ ഉപയോഗത്തിനും ശേഷം തുണി.
  • കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
  • Do not spray water directly onto electrical components.

സംഭരണം:

  • Store the Go Kart in a dry, cool place away from direct sunlight and moisture.
  • Protect the Go Kart from extreme temperatures.

വീൽ കെയർ:

  • The Go Kart is designed for hard surfaces. Avoid rough terrain or surfaces that may cause excessive wear to the wheels.
  • Periodically inspect wheels for wear and tear.

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your Go Kart, refer to the following common problems and solutions.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Go Kart does not moveBattery not charged; Battery connection loose; Power switch off; Motor issueCharge battery fully; Check battery terminals for secure connection; Ensure power switch is ON; Inspect motor and wiring (contact support if needed).
കുറഞ്ഞ വേഗത അല്ലെങ്കിൽ ശക്തിLow battery charge; Overload (exceeding weight limit); Operating on unsuitable surfaceRecharge battery; Ensure rider is within weight limit; Operate on hard, flat surfaces.
Go Kart makes unusual noisesLoose parts; Debris in wheels/motor; Worn componentsInspect for loose parts and tighten; Clear any debris; Contact support for worn component assessment.
Steering is difficult or unresponsiveSteering mechanism obstruction; Loose steering componentsCheck for obstructions; Inspect and tighten steering connections.

If troubleshooting steps do not resolve the issue, please contact Hyper Toys customer support.

7 സ്പെസിഫിക്കേഷനുകൾ

Detailed specifications for the Hyper Toys 24V Go Kart Ride On.

ഫീച്ചർവിശദാംശങ്ങൾ
ഉൽപ്പന്ന അളവുകൾ46 x 11.5 x 23 ഇഞ്ച് (117 x 29 x 58 സെ.മീ)
ഇനത്തിൻ്റെ ഭാരം56 പൗണ്ട് (25.4 കി.ഗ്രാം)
ബാറ്ററി1 Lithium Ion battery (included), 2 x 12V7AH - 24V Parallel
മോട്ടോർDual 200W Motor 2500RPM (2 Wheel Drive)
പരമാവധി റൈഡർ ഭാരം154 പൗണ്ട് (70 കി.ഗ്രാം)
Max User Height150 സെ.മീ / 59 ഇഞ്ച്
Foot Pedal to Back of Seat Distance68 സെ.മീ / 26.7 ഇഞ്ച്
വേഗതForward Low: 5 mph, Reverse: 5 mph, Forward Max: 9 mph
പ്രവർത്തന ഉപരിതലംHard surfaces only
Graphic detailing Go Kart specifications including battery, drive, foot pedal distance, max user height, and max user weight
Image 7.1: Visual summary of the Go Kart's technical specifications.
Diagram showing the dimensions of the Hyper Toys 24V Go Kart Ride On: 46 inches long, 23 inches wide, and 11.5 inches high
Image 7.2: Product dimensions for the Hyper Toys 24V Go Kart Ride On.

8. വാറൻ്റിയും പിന്തുണയും

Hyper Toy Co is committed to providing high-quality products. This product comes with a standard manufacturer's warranty covering defects in materials and workmanship under normal use.

വാറൻ്റി വിവരങ്ങൾ:

  • Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration.
  • വാറൻ്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിൻ്റെ തെളിവ് സൂക്ഷിക്കുക.

ഉപഭോക്തൃ പിന്തുണ:

For technical assistance, parts replacement, or warranty inquiries, please contact Hyper Toys customer support:

  • Webസൈറ്റ്: Visit the official Hyper Toys website (refer to product packaging for URL).
  • ഇമെയിൽ: [Insert Customer Support Email Here, if available in packaging]
  • ഫോൺ: [Insert Customer Support Phone Number Here, if available in packaging]
Hyper Toy Co logo and statement about commitment to quality products
Image 8.1: Hyper Toy Co's commitment to product quality.

അനുബന്ധ രേഖകൾ - 24V Go Kart Ride On

പ്രീview ഹൈപ്പർ ഇ-റൈഡ് മിഡ്-ഡ്രൈവ് സിറ്റി ഇലക്ട്രിക് സൈക്കിൾ ഓണേഴ്‌സ് മാനുവൽ: സുരക്ഷയും പരിപാലനവും
ഹൈപ്പർ ഇ-റൈഡ് മിഡ്-ഡ്രൈവ് സിറ്റി ഇലക്ട്രിക് സൈക്കിളിനായുള്ള ഉപയോക്തൃ-സൗഹൃദ ഓണേഴ്‌സ് മാനുവൽ. സുരക്ഷ, അസംബ്ലി, അറ്റകുറ്റപ്പണി, ഉത്തരവാദിത്തമുള്ള റൈഡിംഗ് രീതികൾ എന്നിവയെക്കുറിച്ചുള്ള സമഗ്രമായ മാർഗ്ഗനിർദ്ദേശം നൽകുന്നു. വാറന്റി ആക്ടിവേഷൻ, ഉപഭോക്തൃ പിന്തുണ എന്നിവയെക്കുറിച്ചുള്ള വിശദാംശങ്ങൾ ഉൾപ്പെടുന്നു.
പ്രീview ഹൈപ്പർ ഇ-റൈഡ് വനിതാ ക്രൂയിസർ ബൈക്ക് ഉടമയുടെ മാനുവൽ: സുരക്ഷ, അസംബ്ലി & പരിപാലനം
This owner's manual provides essential safety, assembly, maintenance, and riding guidelines for the Hyper E-Ride Women's Cruiser Bike. Learn how to properly use, care for, and enjoy your electric bicycle safely.
പ്രീview ഹൈപ്പർ ഇ-റൈഡ് മൗണ്ടൻ സൈക്കിൾ ഓണേഴ്‌സ് മാനുവൽ: സുരക്ഷ, അസംബ്ലി, മെയിന്റനൻസ് ഗൈഡ്
ഹൈപ്പർ ഇ-റൈഡ് മൗണ്ടൻ ഇലക്ട്രിക് സൈക്കിളിനായുള്ള ഔദ്യോഗിക ഉടമയുടെ മാനുവൽ. ഒപ്റ്റിമൽ പ്രകടനത്തിനും ഉപയോക്തൃ സുരക്ഷയ്ക്കുമായി നിർണായക സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ, അസംബ്ലി ഘട്ടങ്ങൾ, അറ്റകുറ്റപ്പണി നടപടിക്രമങ്ങൾ, റൈഡിംഗ് നുറുങ്ങുകൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു. 26 ഇഞ്ച് വീലുകളും പരമാവധി ഭാരം 275 പൗണ്ട് (124 കിലോഗ്രാം) ശേഷിയും ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ഹൈപ്പർ+ക്യൂബ് സ്മാർട്ട് ബാക്കപ്പ് ഉപകരണം: ഉപയോക്തൃ മാനുവലും സജ്ജീകരണ ഗൈഡും
ഹൈപ്പർ+ക്യൂബ് സ്മാർട്ട് ബാക്കപ്പ് ഉപകരണത്തിനായുള്ള സജ്ജീകരണം, ആപ്പ് ഉപയോഗം, ഓട്ടോമാറ്റിക്, മാനുവൽ ബാക്കപ്പ് രീതികൾ, ട്രബിൾഷൂട്ടിംഗ്, പിന്തുണാ വിവരങ്ങൾ എന്നിവയുൾപ്പെടെയുള്ള സമഗ്രമായ നിർദ്ദേശങ്ങൾ ഈ ഗൈഡ് നൽകുന്നു. iOS, Android ഉപകരണങ്ങൾക്ക് അനുയോജ്യം.
പ്രീview ഹൈപ്പർഷീൽഡ് യൂണിവേഴ്സൽ ലൊക്കേറ്റർ ഉപയോക്തൃ ഗൈഡ്
This user guide provides instructions for the HyperShield Universal Locator, a Bluetooth finder compatible with Apple Find My and Google Find Hub. Learn how to connect, use features, and troubleshoot the device.
പ്രീview ഹൈപ്പർജ്യൂസ് നെക്സ്റ്റ് Qi2 4-ഇൻ-1 മാഗ്നറ്റിക് ചാർജിംഗ് സ്റ്റാൻഡ് യൂസർ ഗൈഡ്
ഹൈപ്പർജ്യൂസ് നെക്സ്റ്റ് Qi2 4-ഇൻ-1 മാഗ്നറ്റിക് ചാർജിംഗ് സ്റ്റാൻഡിനായുള്ള (മോഡൽ HJ3004) സമഗ്രമായ ഉപയോക്തൃ ഗൈഡ്, സജ്ജീകരണം, സവിശേഷതകൾ, അനുയോജ്യത, സുരക്ഷ, വാറന്റി വിവരങ്ങൾ എന്നിവ വിശദമാക്കുന്നു.