1. ആമുഖം
This manual provides essential information for the safe and effective use of the TURCK WKB 3T-4 Cable Assembly. This product is a high-quality industrial cable designed for reliable electrical connections in various applications. Please read this manual thoroughly before installation and operation.
Figure 1: TURCK WKB 3T-4 Cable Assembly featuring a right-angle 1/2-20UNF female connector. The cable is yellow and the connector housing is metallic.
2 സുരക്ഷാ വിവരങ്ങൾ
Always observe the following safety precautions to prevent injury or damage to the product and connected equipment:
- പവർ വിച്ഛേദിക്കുക: Ensure all power to the system is disconnected before installing, removing, or performing any maintenance on the cable assembly.
- ശരിയായ കൈകാര്യം ചെയ്യൽ: Do not bend, twist, or pull the cable excessively. Avoid sharp edges or abrasive surfaces that could damage the cable jacket.
- പരിസ്ഥിതി വ്യവസ്ഥകൾ: Use the cable within its specified voltage, current, and temperature ratings. While rated for indoor/outdoor use, protect connections from direct water ingress unless specifically designed for submersible applications.
- യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥർ: Installation and maintenance should only be performed by qualified personnel familiar with electrical systems and safety procedures.
- ഉപയോഗിക്കുന്നതിന് മുമ്പ് പരിശോധിക്കുക: Before each use, visually inspect the cable and connector for any signs of damage, wear, or corrosion. Do not use if damage is observed.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview ഘടകങ്ങളും
The TURCK WKB 3T-4 Cable Assembly is designed for robust industrial connectivity. Key features include:
- കണക്റ്റർ തരം: Right Angle 1/2-20UNF Female Connector.
- വയർ കോൺഫിഗറേഷൻ: 3-wire cable.
- കേബിൾ നീളം: 4 meters (4M).
- ഇലക്ട്രിക്കൽ റേറ്റിംഗുകൾ: 4 Amperes (4A), 250 Volts (250V).
- Cable Jacket: AWM PVC (Appliance Wiring Material, Polyvinyl Chloride) for durability and flexibility.
- നിറം: Black cable jacket.
- ഉപയോഗം: ഇൻഡോർ, ഔട്ട്ഡോർ ആപ്ലിക്കേഷനുകൾക്ക് അനുയോജ്യം.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Follow these steps for proper installation of the cable assembly:
- തയ്യാറാക്കൽ: Ensure the mating male connector on your device or system is clean and free of debris. Verify that the system is powered off and de-energized.
- വിന്യാസം: Carefully align the right-angle female connector of the WKB 3T-4 cable assembly with the corresponding male connector.
- കണക്ഷൻ: Gently push the connector together until it seats firmly. The right-angle design allows for connections in confined spaces.
- സുരക്ഷിത കണക്ഷൻ: Rotate the threaded coupling nut on the female connector clockwise until it is hand-tight. Do not overtighten, but ensure a secure connection to prevent accidental disconnection or ingress of contaminants.
- കേബിൾ റൂട്ടിംഗ്: Route the cable in a manner that avoids sharp bends, kinks, or areas where it could be pinched, cut, or exposed to excessive heat or abrasion. Use cable ties or clamps if necessary to secure the cable path.
- സ്ഥിരീകരണം: After installation, visually inspect the connection to ensure it is fully seated and secured.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The TURCK WKB 3T-4 Cable Assembly functions as a passive electrical conduit, transmitting power and/or signals between connected devices. Once properly installed, its operation is dependent on the connected equipment.
- Ensure the cable is not subjected to stresses beyond its design limits (e.g., excessive pulling force, sharp impacts).
- Verify that the connected devices are operating within the cable's specified voltage and current ratings (4A, 250V).
- The right-angle design is particularly useful for applications where space is limited or where the cable needs to run parallel to a surface immediately after the connection point.
6. പരിപാലനം
Regular maintenance helps ensure the longevity and reliable performance of your cable assembly:
- വൃത്തിയാക്കൽ: Periodically clean the exterior of the cable and connector with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild detergent can be used, ensuring the connector pins are dry before re-connecting.
- പരിശോധന: Regularly inspect the cable jacket for cracks, cuts, abrasions, or discoloration. Check the connector for bent pins, corrosion, or loose components.
- കണക്ഷൻ സമഗ്രത: Periodically check the tightness of the connector's coupling nut to ensure it remains secure.
- സംഭരണം: When not in use, store the cable in a clean, dry environment, away from extreme temperatures and direct sunlight. Avoid coiling the cable too tightly.
7. പ്രശ്നപരിഹാരം
This section addresses common issues you might encounter with the cable assembly.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| No power/signal transmission | അയഞ്ഞ കണക്ഷൻ കേബിൾ/കണക്റ്റർ കേടായി Incorrect wiring (external to cable) | Ensure connector is fully seated and coupling nut is tight. Inspect cable for visible damage; replace if damaged. Verify wiring of connected devices. |
| ഇടവിട്ടുള്ള കണക്ഷൻ | അയഞ്ഞ കണക്ഷൻ പിന്നുകളിൽ നാശം ആന്തരിക കേബിളിന് കേടുപാടുകൾ | Tighten coupling nut. Clean connector pins carefully (with power off). Replace cable if internal damage is suspected. |
| Connector difficult to mate | തെറ്റായ ക്രമീകരണം കണക്ടറിലെ അവശിഷ്ടങ്ങൾ Bent pins | Ensure correct orientation and alignment. Clean connector thoroughly. Inspect for bent pins; if found, cable may need replacement. |
8 സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the TURCK WKB 3T-4 Cable Assembly:
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| മോഡൽ നമ്പർ | WKB 3T-4 |
| ബ്രാൻഡ് | ടർക്ക് |
| കണക്റ്റർ തരം | Right Angle 1/2-20UNF Female |
| വയർ കോൺഫിഗറേഷൻ | 3 വയർ |
| കേബിൾ നീളം | 4 Meters (4M) |
| നിലവിലെ റേറ്റിംഗ് | 4 Amperes (4A) |
| വാല്യംtagഇ റേറ്റിംഗ് | 250 Volts (250V) |
| കേബിൾ ജാക്കറ്റ് മെറ്റീരിയൽ | AWM PVC |
| നിറം | കറുപ്പ് |
| ഇൻഡോർ/ഔട്ട്ഡോർ ഉപയോഗം | ഇൻഡോർ, ഔട്ട്ഡോർ |
| ആകൃതി | വൃത്താകൃതി |
| ആദ്യം ലഭ്യമായ തീയതി | ഏപ്രിൽ 30, 2020 |
9. വാറൻ്റിയും പിന്തുണയും
TURCK products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official TURCK webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ അംഗീകൃത വിതരണക്കാരനെ ബന്ധപ്പെടുക.
For technical support, product inquiries, or assistance with troubleshooting beyond the scope of this manual, please contact TURCK customer service or your local TURCK representative. Contact information can usually be found on the official TURCK webസൈറ്റ് (www.turck.com).
