AVM FRITZ! Repeater 600 User Manual

ആമുഖം

The FRITZ! Repeater 600 is a compact device designed to extend the range of your existing wireless network. It operates on the 2.4 GHz band, providing WLAN N connectivity at speeds up to 600 Mbps. This repeater supports Mesh WiFi, ensuring stable and seamless connections throughout your home or office network. Its compact design allows for discreet placement in any standard power socket.

പാക്കേജ് ഉള്ളടക്കം

• 1 x FRITZ! Repeater 600
• ദ്രുത ഇൻസ്റ്റലേഷൻ ഗൈഡ്

Image: The FRITZ! Repeater 600 packaging, showing the device and branding.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

• Ensure the device is plugged into a properly grounded power outlet.
• ഈർപ്പം അല്ലെങ്കിൽ അങ്ങേയറ്റത്തെ താപനിലയിലേക്ക് ഉപകരണം തുറന്നുകാട്ടരുത്.
• ഉപകരണം തുറക്കരുത് casing; യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥരെ സർവീസ് ചെയ്യാൻ റഫർ ചെയ്യുക.
• നേരിട്ട് സൂര്യപ്രകാശത്തിൽ നിന്നും താപ സ്രോതസ്സുകളിൽ നിന്നും ഉപകരണം അകറ്റി നിർത്തുക.

സജ്ജമാക്കുക

1. പ്രാരംഭ പ്ലേസ്മെന്റ്

Plug the FRITZ! Repeater 600 into a power outlet located between your existing wireless router and the area where you want to improve WiFi coverage. The repeater's LED indicator will help you find an optimal position.

2. WPS Configuration (Recommended for FRITZ!Box and WPS-enabled routers)

1. Plug the FRITZ! Repeater 600 into a power outlet. Wait for the LED to indicate readiness (typically a slow blink or solid light).
2. നിങ്ങളുടെ വയർലെസ് റൂട്ടറിലെ WPS ബട്ടൺ അമർത്തുക.
3. Within two minutes, press the 'Connect' button on the FRITZ! Repeater 600.
4. The LED on the repeater will flash rapidly during the connection process and then become solid when successfully connected.

Image: A hand pressing the 'Connect' button on the FRITZ! Repeater 600, which is plugged into a wall socket.

3. Manual Configuration (if WPS is not available or fails)

1. Plug the FRITZ! Repeater 600 into a power outlet.
2. Connect a computer, tablet, or smartphone to the FRITZ! Repeater's default wireless network. The default network key is printed on the bottom of the device.
3. എ തുറക്കുക web browser and navigate to the repeater's configuration interface (usually http://fritz.repeater or http://192.168.178.2).
4. Follow the on-screen instructions to select your existing wireless network and enter its password.

4. ഒപ്റ്റിമൽ പ്ലേസ്മെന്റ്

The LED indicator on the repeater provides feedback on the signal quality. A solid green light typically indicates a good connection. If the light is orange or red, consider moving the repeater closer to your main router until a stable green light is achieved. This ensures the best possible extension of your WiFi signal.

Image: An illustration depicting a multi-story house with FRITZ! Repeaters strategically placed to extend WiFi coverage to different rooms and floors.

ഓപ്പറേഷൻ

LED സൂചകങ്ങൾ

The LED on the front of the FRITZ! Repeater 600 provides visual status information:

• കട്ടിയുള്ള പച്ച: The repeater is successfully connected and providing good signal quality.
• മിന്നുന്ന പച്ച: The repeater is attempting to connect or is in WPS mode.
• Solid Orange/Red: The repeater is connected but the signal quality is poor, or there is an issue. Consider repositioning the device.
• ഓഫ്: The device is not powered on or is in a power-saving state.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് ഫ്രണ്ട് view of the FRITZ! Repeater 600, highlighting its compact design and the LED indicator light.

Mesh WiFi Functionality

When used with a FRITZ!Box or another Mesh-enabled router, the FRITZ! Repeater 600 integrates into a Mesh WiFi system. This allows your devices to seamlessly switch between the router and the repeater without losing connection, ensuring optimal performance as you move around your network.

മെയിൻ്റനൻസ്

• വൃത്തിയാക്കൽ: Disconnect the repeater from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: Periodically check the AVM website for firmware updates for your FRITZ! Repeater 600. Updates can provide performance improvements, new features, and security enhancements.
• വെൻ്റിലേഷൻ: Ensure the repeater is not covered and has adequate airflow around it to prevent overheating.

ട്രബിൾഷൂട്ടിംഗ്

No Connection / Poor Signal

• Reposition the Repeater: If the LED indicator is orange or red, move the repeater closer to your main wireless router.
• പവർ പരിശോധിക്കുക: പ്രവർത്തിക്കുന്ന ഒരു പവർ ഔട്ട്‌ലെറ്റിൽ റിപ്പീറ്റർ സുരക്ഷിതമായി പ്ലഗ് ചെയ്‌തിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• Verify Router Settings: Confirm that your main wireless router is powered on and broadcasting a WiFi signal.
• കണക്ഷൻ പുനഃസ്ഥാപിക്കുക: Try the WPS configuration process again. If unsuccessful, attempt manual configuration via a web ബ്രൗസർ.
• Default Network Key: If connecting directly to the repeater for manual setup, ensure you are using the correct default network key printed on the device.

ഉപകരണം പുനഃസജ്ജമാക്കുന്നു

If the repeater is unresponsive or you wish to revert to factory settings, a factory reset may be necessary. Consult the full manual or AVM support website for specific reset instructions, as this typically involves pressing and holding a small reset button for several seconds.

സ്പെസിഫിക്കേഷനുകൾ

Image: The FRITZ! Repeater 600 shown with its physical dimensions: 3cm height, 6.4cm width, and 6.4cm depth.

വാറൻ്റി വിവരങ്ങൾ

Specific warranty details for the FRITZ! Repeater 600 are not provided in the available product data. Please refer to the official AVM website or your purchase documentation for comprehensive warranty terms and conditions.

പിന്തുണ

Detailed support contact information is not provided in the available product data. For technical assistance, further documentation, or customer service, please visit the official AVM webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുക.