ഫ്യൂറുനോ 200WX അൾട്രാസോണിക് വെതർ സ്റ്റേഷൻ ഇൻസ്ട്രക്ഷൻ മാനുവൽ

ആമുഖം

The Furuno 200WX Ultrasonic Weather Station is an advanced, all-in-one sensor designed to provide essential weather readings with high precision and accuracy. It detects instantaneous changes in weather conditions and operates continuously, even in adverse environments. This station measures apparent and true wind speed and direction, air temperature, and wind chill temperature. It also integrates a 3-Axis solid-state compass and a 3-Axis Rate Gyro for superior compass and pitch/roll accuracy. The 200WX supports both CanBUS/NMEA2000 and NMEA 0183 connectivity, allowing direct connection to compatible marine navigation systems like NavNet TZtouch/NavNet 3D DRS Radar sensors. Power is supplied via the NMEA 2000 bus, facilitating flexible installation. Its UV-stabilized, compact, and fully waterproof housing is resistant to chemicals and sunlight, ensuring durability.

A white cylindrical device with a grey band, labeled 'AIRMAR WeatherStation® 200WX', designed for outdoor weather monitoring.

സജ്ജമാക്കുക

This section details the initial setup of your Furuno 200WX Ultrasonic Weather Station.

അൺപാക്കിംഗും പരിശോധനയും

• പാക്കേജിംഗിൽ നിന്ന് എല്ലാ ഘടകങ്ങളും ശ്രദ്ധാപൂർവ്വം നീക്കം ചെയ്യുക.
• ഉൾപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:
  • Furuno 200WX Ultrasonic Weather Station unit
  • മൌണ്ടിംഗ് ഹാർഡ്വെയർ
  • കണക്ഷൻ കേബിൾ
• Inspect all components for any signs of damage. Contact customer support if any damage is found.

Mounting the Weather Station

The 200WX features a standard 1-inch mount, accommodating existing mounted hardware. Ensure the mounting location provides an unobstructed view of the sky for accurate readings.

1. Select a suitable mounting location, free from obstructions that could interfere with wind or precipitation measurements.
2. Secure the mounting hardware according to the provided instructions.
3. Attach the 200WX unit to the mounted hardware, ensuring it is firmly in place.

വൈദ്യുതി ബന്ധം

The 200WX supports both CanBUS/NMEA2000 and NMEA 0183. Power is supplied from an NMEA 2000 bus.

1. Connect the provided cable to the NMEA 2000 port on the 200WX unit.
2. Connect the other end of the cable to your NMEA 2000 bus or compatible NavNet TZtouch/NavNet 3D DRS Radar sensor.
3. എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും വാട്ടർപ്രൂഫുമാണെന്ന് ഉറപ്പാക്കുക.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Furuno 200WX Ultrasonic Weather Station provides continuous weather readings with no moving parts. Data is converted and distributed throughout the NavNet TZtouch/NavNet 3D Ethernet network.

ഡാറ്റ ഏറ്റെടുക്കൽ

• The unit automatically measures and transmits:
  • Apparent and True Wind Speed and Direction
  • എയർ താപനില
  • കാറ്റ് തണുപ്പിന്റെ താപനില
  • ബാരോമെട്രിക് മർദ്ദം
• The integrated 3-Axis solid-state compass and 3-Axis Rate Gyro provide accurate compass and pitch/roll data.

Interfacing with Display Units

Connect your display unit (e.g., NavNet TZtouch/NavNet 3D) to the NMEA 2000 network to view the weather data. Refer to your display unit's manual for specific instructions on configuring data displays.

The system is designed for continuous operation, even in adverse weather conditions.

മെയിൻ്റനൻസ്

The Furuno 200WX Ultrasonic Weather Station is designed for minimal maintenance due to its lack of moving parts.

പതിവ് വൃത്തിയാക്കൽ

• Periodically inspect the unit for any accumulation of dirt, salt, or debris.
• ഒരു സോഫ്റ്റ്, ഡി ഉപയോഗിച്ച് യൂണിറ്റിൻ്റെ പുറംഭാഗം വൃത്തിയാക്കുകamp തുണി. ഉരച്ചിലുകൾ ഉണ്ടാക്കുന്ന ക്ലീനറുകളോ ലായകങ്ങളോ ഒഴിവാക്കുക.
• Ensure the ultrasonic transducers (located on the top of the unit) are clear of obstructions.

പാരിസ്ഥിതിക പരിഗണനകൾ

The UV-stabilized, compact housing is fully waterproof and resistant to chemicals and sunlight, ensuring long-term durability in marine environments.

ട്രബിൾഷൂട്ടിംഗ്

This section provides solutions to common issues you may encounter with your 200WX Weather Station.

No Data Displayed

• പവർ പരിശോധിക്കുക: Ensure the NMEA 2000 bus is powered and the 200WX unit is receiving power.
• കേബിൾ കണക്ഷനുകൾ: Verify that the NMEA 2000 cable is securely connected to both the 200WX and the network.
• നെറ്റ്‌വർക്ക് കോൺഫിഗറേഷൻ: Confirm that your display unit is correctly configured to receive data from the NMEA 2000 network. Refer to your display unit's manual.

Inaccurate Wind Readings

• തടസ്സങ്ങൾ: Check for any physical obstructions near the unit that could be interfering with wind flow (e.g., mast, rigging, other sensors).
• മൗണ്ടിംഗ് ലൊക്കേഷൻ: Ensure the unit is mounted in a location with clear, undisturbed airflow.
• സെൻസർ ശുചിത്വം: Clean the ultrasonic transducers as described in the Maintenance section.

Incorrect Compass/Pitch/Roll Data

• കാലിബ്രേഷൻ: If available, perform a compass calibration procedure on your connected display unit or through the 200WX configuration.
• കാന്തിക ഇടപെടൽ: Ensure the unit is not mounted too close to strong magnetic fields (e.g., large metal objects, electrical cables).

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the official Furuno website or contact your local Furuno dealer. Keep your purchase receipt and product serial number handy for any inquiries.

അധിക വിഭവങ്ങൾ:

• Official Furuno Manuals
• Furuno Support Page

അനുബന്ധ ഉൽപ്പന്ന വീഡിയോകൾ

The following videos provide additional information about weather stations and related products. Please note that these videos may feature different models or brands, but offer general insights into weather monitoring technology.