1. Вовед
This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash DB460M Micro-ATX PC Gaming Case. Designed for optimal airflow and ease of assembly, the DB460M offers a robust foundation for high-performance computing systems. Please read this manual thoroughly before beginning your PC build to ensure proper installation and safe operation.

Figure 1: darkFlash DB460M Micro-ATX PC Gaming Case (White)
2. Карактеристики на производот
- High-Performance Hardware Support: Accommodates GPUs up to 420mm in length, including high-end models, and supports top-mounted liquid cooling radiators up to 360mm.
- Full-Mesh Front Panel: Engineered for maximum airflow, ensuring efficient cooling for critical components during demanding tasks.
- Tool-Free Clamshell Tempered Glass Side Panel: Provides convenient, screw-free access to internal components for easy installation and upgrades. The clear tempered glass allows for showcasinвашата градба.
- Ефикасно управување со кабли: Features a full-length PSU shroud, dedicated cable routing channels, and tie-down points to maintain a clean interior and optimize airflow.
- Versatile Cooling Options: Supports multiple fan configurations and radiator sizes for both air and liquid cooling setups.
3. Водич за поставување
3.1 Распакување и почетна инспекција
Carefully remove the case from its packaging. Inspect for any signs of damage during transit. Retain the packaging for future transport or warranty claims.
3.2 Инсталација на матична плоча
- Install the necessary motherboard standoffs for your Micro-ATX or ITX motherboard.
- Carefully place the motherboard into the case, aligning it with the standoffs and the I/O shield opening.
- Прицврстете ја матичната плоча со завртки.
3.3 Инсталација на единицата за напојување (PSU).
- Position the PSU in the dedicated bottom-mount compartment.
- Secure the PSU to the rear of the case using screws.
- Route necessary cables through the cutouts for efficient cable management.
3.4 Инсталација на диск за складирање
The case supports 2.5" SSDs and 3.5" HDDs. Refer to the case's internal layout for specific mounting points. Typically, 2.5" drives mount on the motherboard tray or dedicated brackets, while 3.5" drives are installed in the PSU shroud area.
3.5 Graphics Processing Unit (GPU) Installation
- Remove the appropriate PCI slot covers from the rear of the case.
- Insert the GPU into the PCIe slot on the motherboard.
- Secure the GPU with screws or the tool-less retention mechanism. The case supports GPUs up to 420mm in length.

Figure 2: GPU Length Support (Max 420mm)
3.6 Cooling System Installation (Fans & Radiators)
The DB460M offers extensive cooling support:
- Врв: Supports up to 3x 120mm fans, 2x 140mm fans, or a 360mm/280mm/240mm radiator.
- Предна страна: Supports up to 3x 120mm fans, 2x 140mm fans, or a 240mm radiator.
- Заден дел: Поддржува 1x вентилатор од 120 мм.
- Долу: Supports up to 2x 120mm fans.
- Страна: Supports up to 2x 120mm fans.

Figure 3: Fan Support Locations

Figure 4: Radiator Support
3.7 Connecting Front Panel I/O
Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin assignments.

Figure 5: Front Panel I/O Ports (USB 3.0 highlighted)
4. Упатства за работа
4.1 Вклучување/исклучување
Once all components are installed and connected, press the power button on the front I/O panel to turn on your system. To power off, use the operating system's shutdown function or press and hold the power button for several seconds.
4.2 Оптимизација на протокот на воздух
The DB460M is designed for high airflow. Ensure that fans are installed in appropriate intake and exhaust configurations to maximize cooling efficiency. The full-mesh front panel facilitates significant air intake.

Figure 6: Airflow Diagram
5. Одржување
5.1 Чистење на филтри за прашина
Regularly clean the removable dust filters located on the front, top, and bottom of the case to maintain optimal airflow and prevent dust buildup inside your system. Gently remove the filters and clean them with compressed air or a soft brush.
5.2 Чистење на надворешни површини
Користете мека, гamp cloth to clean the exterior surfaces of the case. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.
5.3 Side Panel Removal
The tool-free clamshell tempered glass side panel can be easily opened or removed for access to internal components. Gently pull the panel open from the rear to unlatch it. To fully remove, lift it upwards from its hinges.
6 Смена на проблеми
- Системот не се вклучува: Check all power connections, including the PSU to the wall, PSU to motherboard, and front panel power switch cable to the motherboard.
- Нема излез на екранот: Ensure the GPU is correctly seated and connected to the power supply. Verify the monitor cable is securely connected to the GPU.
- Overheating components: Confirm all fans are spinning and installed in the correct orientation for airflow. Ensure CPU cooler and GPU fans are functioning. Clean dust filters.
- Лабави компоненти: If you hear rattling or notice instability, power down the system and check that all components (motherboard, GPU, drives) are securely fastened.
For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.
7. Спецификации
| Карактеристика | Детал |
|---|---|
| Име на моделот | DF-DB460M-WH-NF |
| Тип на случај | Mid Tower |
| Компатибилност со матична плоча | Micro ATX, ITX |
| Материјал | Metal, Plastic, Tempered Glass |
| Боја | Бело |
| Тежина на ставката | 13.3 фунти (приближно 6.03 кг) |
| Чистење на графичкиот процесор | До 420 мм |
| Висина на ладилникот на процесорот | До 174 мм |
| Монтирање на напојување | Долна монтажа |
| Метод на ладење | Воздух, Вода |
| Потпора за радијатор (горе) | 360мм / 280мм / 240мм |
| Потпора за радијатор (напред) | 240 мм |
| Поддршка за навивачи (горе) | 3x 120мм или 2x 140мм |
| Поддршка за вентилатор (напред) | 3x 120мм или 2x 140мм |
| Поддршка за вентилатор (заден) | 1x120мм |
| Fan Support (Bottom) | 2x120мм |
| Fan Support (Side) | 2x120мм |
| Drive Bays (3.5" HDD) | 2 (макс) |
| Drive Bays (2.5" SSD) | 2 (макс) |
| Слотови за проширување | 4 |
| Предни влезни порти | 1x USB 3.0, 2x USB 2.0, HD Audio, Power, Reset |
| Посебни карактеристики | Dust Filter, Noise Reduction Technology, Partition Plate Cooling Technology |

Figure 7: Case Dimensions and Specifications Overview
8. Информации за гаранцијата
The darkFlash DB460M Micro-ATX PC Gaming Case comes with a 1 години гаранција на производителот. Please retain your proof of purchase for any warranty claims. For specific terms and conditions, refer to the official darkFlash webсајт или контактирајте со поддршката за корисници.
9. Поддршка и контакт
За понатамошна помош, техничка поддршка или за view additional product resources, please visit the official darkFlash webсајт:
You may also refer to the official product video for a visual guide on the case features and build possibilities:
Video: darkFlash DB460M Mid-Tower PC Gaming Case Overview. This video provides a visual demonstration of the case's features and internal layout.