Упатство за употреба на роботскиот чистач на базени BWT Cosmy The Bot 250

1. Вовед

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. Информации за безбедност

Секогаш почитувајте ги следниве безбедносни мерки за да го намалите ризикот од повреда или оштетување:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Keep children and pets away from the pool area when the cleaner is in operation.
• Only use the cleaner in water temperatures between 10°C (50°F) and 35°C (95°F).
• Do not use the cleaner if there are people in the pool.
• Пред да започнете со работа, проверете дали чистачот е целосно потопен.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. Компоненти на производот

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• Главна единица: The robotic cleaner body, housing the motor and filtration system.
• Кошница за филтри: Removable basket for collecting debris.
• Brushes/Rollers: Located on the underside for scrubbing pool surfaces.
• Floating Cable: Connects the cleaner to the power supply unit.
• Единица за напојување: Converts AC power to safe DC power for the cleaner.

Слика 3.1: напред view of the cleaner, highlighting the cleaning brushes and intake area.

Слика 3.2: Долна страна view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

Слика 3.3: Внатрешна view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. Поставување

1. Распакувајте го чистачот: Carefully remove the cleaner and all accessories from the packaging.
2. Connect the Floating Cable: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Place in Pool: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. Position Power Supply: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. Приклучи се: Plug the power supply unit into a grounded electrical outlet.

5. Упатства за работа

1. Започнете го циклусот на чистење: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. Прилагодете ја моќта на вшмукување: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. Чистење на мониторот: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. Remove from Pool: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. Одржување

Regular maintenance ensures optimal performance and extends the lifespan of your robotic pool cleaner.

6.1. Чистење на корпата за филтер

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. Исклучете го напојувањето: Always unplug the power supply unit from the electrical outlet before cleaning.
2. Отворен филтерски оддел: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. Отстрани ја корпата за филтрирање: Grasp the handle of the filter basket and lift it out of the cleaner.
4. Филтер за плакнење: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Reinsert Filter: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. Затворете го капакот: Close the filter compartment lid securely.

Слика 6.1: Горе view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

6.2. Општо чистење и складирање

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Чувајте го средството за чистење на ладно и суво место, подалеку од директна сончева светлина и екстремни температури.
• Coil the floating cable loosely to prevent kinks or damage.

7 Смена на проблеми

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

Доколку проблемот продолжи и по обидот за овие решенија, контактирајте ја службата за корисничка поддршка.

8. Спецификации

9. Гаранција и поддршка

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

Производител: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.