TP-Link TL-FC311B-2 Gigabit WDM SFP to RJ45 Fiber Media Converter User Manual

1. Вовед

The TP-Link TL-FC311B-2 is a Gigabit WDM SFP to RJ45 Fiber Media Converter designed to convert 1000BASE-LX fiber optic signals to 1000Base-T copper media and vice versa. This device facilitates long-distance network connections by extending Ethernet over fiber optic cable, supporting distances up to 2 km using a single-mode fiber. It employs WDM (wavelength division multiplexing) technology, allowing data transmission and reception over a single fiber strand, which can reduce cabling costs and simplify infrastructure.

2. Производот завршиview

2.1 Клучни карактеристики

• Converts 1000BASE-LX fiber to 1000Base-T copper media.
• Supports auto-negotiation for Half-Duplex/Full-Duplex transfer mode.
• Features auto MDI/MDIX for the TX port.
• Utilizes WDM technology for data transmission and reception over a single fiber.
• Achieves distances up to 2 km with single-mode fiber.
• Wavelengths: Tx 1310 nm, Rx 1550nm.
• Compatible with TP-Link TL-FC311A-2 for a complete fiber link.

2.2 Содржина на пакетот

• 1x TL-FC311B-2 Gigabit WDM SFP to RJ45 Fiber Media Converter
• 1x адаптер за напојување
• 1x Упатство за употреба

2.3 Распоред на уреди

This image displays the front panel of the TL-FC311B-2 media converter. On the left is the SFP fiber port, followed by three LED indicators (PWR, Link/Act for fiber, Link/Act for Ethernet), and on the right is the Gigabit Ethernet (RJ45) port.

This image shows the side of the TL-FC311B-2 media converter, highlighting the 5V DC power input jack and its specifications (5V === 0.6A).

An angled perspective of the TL-FC311B-2 media converter, providing a clearer view of both the SFP fiber port and the Gigabit Ethernet RJ45 port, along with the LED indicators.

3. Упатства за поставување

1. Отпакувајте го Уредот: Carefully remove the TL-FC311B-2 from its packaging.
2. Поврзување за напојување: Connect the provided power adapter to the DC 5V port on the side of the media converter. Plug the adapter into a standard electrical outlet. The ПВР LED indicator on the front panel should illuminate, indicating the device is powered on.
3. Етернет конекција: Connect a standard Ethernet cable (RJ45) from your network device (e.g., switch, router, computer) to the Гигабитен етернет port on the front of the TL-FC311B-2. The Етернет врска/Акт LED should light up when a valid connection is established and blink during data activity.
4. Fiber Optic Connection: Connect a single-mode fiber optic cable to the SFP fiber port on the front of the TL-FC311B-2.
   • Важна забелешка: For a complete fiber link, you must use two compatible WDM media converters. The TL-FC311B-2 (Tx 1310nm, Rx 1550nm) must be paired with a TL-FC311A-2 (Tx 1550nm, Rx 1310nm) at the other end of the fiber link. Using two 'B' models or two 'A' models will prevent the link from establishing.
   • Ensure the fiber cable is securely connected. The Врска со влакна/Акт LED should illuminate when a stable fiber link is established and blink during data activity.
5. Потврдете ја врската: Once both Ethernet and fiber connections are made, and the corresponding Link/Act LEDs are lit, your media converter is ready for operation.

This diagram demonstrates various network setups where the media converter can be utilized. It shows configurations for surveillance systems using IP cameras, point-to-point fiber connections between buildings, and long-range data transmission in industrial settings, highlighting the use of fiber and Ethernet cables.

4. Упатства за работа

The TL-FC311B-2 operates automatically once properly connected and powered. It functions as a transparent bridge between the fiber optic and Ethernet segments of your network.

4.1 LED индикатори

• PWR (моќ): Green LED. On when the device is powered.
• Врска со влакна/Акт: Green LED. On when a stable fiber optic link is established. Blinks when data is being transmitted or received over the fiber link.
• Етернет врска/Акт: Green LED. On when a stable Ethernet link is established. Blinks when data is being transmitted or received over the Ethernet port.

4.2 Автоматски функции

• Автоматско преговарање: The Ethernet port automatically detects the speed (10/100/1000Mbps) and duplex mode (Half-Duplex/Full-Duplex) of the connected Ethernet device.
• Автоматски MDI/MDIX: The Ethernet port automatically adjusts for straight-through or crossover Ethernet cables, eliminating the need for specific cable types.

5. Одржување

• Чистење: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid or aerosol cleaners.
• Вентилација: Ensure proper airflow around the device to prevent overheating. Do not block ventilation openings.
• Животна средина: Operate the device within the specified temperature and humidity ranges (0-40°C, 10-90% non-condensing humidity).
• Управување со кабли: Ensure all cables are securely connected and not under strain. Avoid sharp bends in fiber optic cables.

6 Смена на проблеми

• Нема моќ:
  • Ensure the power adapter is securely connected to the device and a working electrical outlet.
  • Проверете дали штекерот е функционален.
  • Проверете дали на ПВР LED е осветлен.
• No Fiber Link (Fiber Link/Act LED Off):
  • Confirm that the fiber optic cable is correctly and securely connected to both media converters.
  • Ensure you are using a compatible pair of WDM media converters (e.g., TL-FC311B-2 with TL-FC311A-2). WDM converters require specific Tx/Rx wavelengths to match.
  • Check the fiber cable for damage.
  • Verify the fiber type (single-mode) and distance are within the device's specifications (up to 2 km).
• No Ethernet Link (Ethernet Link/Act LED Off):
  • Ensure the Ethernet cable is securely connected to both the media converter and the network device.
  • Verify the Ethernet cable is not damaged.
  • Check the status of the connected network device (e.g., switch, router).
• Бавен пренос на податоци:
  • Ensure all connected devices support Gigabit Ethernet for optimal performance.
  • Check for excessive network traffic or other bottlenecks in your network.
  • Verify the fiber optic cable is not exceeding its maximum supported distance.

7. Спецификации

This table provides detailed specifications for various TP-Link media converter models. For the TL-FC311B-2, it lists 1x 1000Mbps SC Fiber Port, 2 km transmission distance, Single-Mode Fiber, Tx 1310 nm, Rx 1550nm wavelength, dimensions of 3.7 x 2.9 x 1.1 inches, and an operating temperature range of 0-40°C (32-104°F).

8. Гаранција и поддршка

For technical support, warranty information, and other inquiries, please contact TP-Link customer service using the details below:

• Телефон: (866) 225-8139
• Поддршка за производи Webсајт: myproducts.tp-link.com/us
• Е-пошта: support.USA@tp-link.com

For detailed warranty terms and conditions, please refer to the official TP-Link webлокацијата или гарантната картичка вклучена со вашиот производ.

This image provides TP-Link's customer support details: phone number (866) 225-8139, product support website myproducts.tp-link.com/us, and email support.USA@tp-link.com.