Graham-Field Everest & Jennings Advantage LX Wheelchair Instruction Manual

Вовед

This instruction manual provides essential information for the safe and effective use, setup, and maintenance of your Graham-Field Everest & Jennings Advantage LX Wheelchair. Please read this manual thoroughly before operating the wheelchair and retain it for future reference. Proper understanding and adherence to these instructions will ensure optimal performance and user safety.

Клучни карактеристики

• Издржлива конструкција: Features a carbon steel frame with a silvervein hammertone finish for enhanced durability and scratch resistance.
• Удобно седење: Equipped with black padded nylon upholstery for comfort and ease of cleaning.
• Adjustable Legrests: Includes tool-free adjustable footrests or elevating legrests with black composite footplates.
• Поместени потпирачи за раце: Available with detachable desk arms or full-length padded arms for user comfort.
• Практично складирање: Features a standard chart pocket on the seat back for personal items.
• Тежински капацитет: Supports a maximum weight capacity of 300 pounds, evenly distributed.
• Димензии на седиштата: Available in 16, 18, and 20-inch seat widths with a 16-inch seat depth.

Инструкции за поставување

1. Отпакување и првична проверка

Carefully remove the wheelchair from its packaging. Inspect all components for any signs of damage that may have occurred during shipping. If any damage is found, do not proceed with assembly or use, and contact customer support immediately.

2. Расклопување на инвалидската количка

1. Поставете ја преклопената инвалидска количка на рамна, стабилна површина.
2. Grasp the handgrips and gently pull them apart to begin unfolding the frame.
3. Push down on the seat rails until the seat is fully open and flat. Ensure the cross braces are fully extended and locked into place.

Image: The Everest & Jennings Advantage LX Wheelchair in its fully unfolded state, ready for use.

3. Attaching and Adjusting Footrests/Legrests

1. Align the footrest/legrest attachment pins with the corresponding receptacles on the wheelchair frame.
2. Push the footrest/legrest firmly into place until it locks securely.
3. To adjust the height of the footplates, locate the adjustment pins on the legrest extension. Press the pin and slide the footplate assembly up or down to the desired height. Ensure both footplates are at an equal height.
4. For elevating legrests, use the lever to adjust the angle of the legrest for optimal comfort and support.

Слика: Детална view of the wheelchair's elevating legrests and footplates, highlighting their adjustability.

Упатства за работа

1. Transferring to and from the Wheelchair

Ensure the wheelchair brakes are engaged before attempting any transfer. Position the wheelchair as close as possible to the transfer surface. If equipped, swing away or remove the footrests/legrests to clear the path. Use proper transfer techniques or seek assistance as needed.

2. Propelling the Wheelchair

To move the wheelchair, grasp the handrims on the large rear wheels and push forward or backward. For assistance, a caregiver can push the wheelchair using the push handles on the backrest.

3. Engaging and Disengaging Brakes

To engage the brakes, push the brake levers forward until they lock against the tires. To disengage, pull the levers backward. Always ensure brakes are fully engaged when stationary to prevent unintended movement.

4. Folding the Wheelchair for Transport or Storage

1. Engage both wheel brakes.
2. Remove the footrests/legrests by pulling the release lever and swinging them out, then lifting them off.
3. Grasp the center of the seat upholstery, typically near the front and back edges, and pull upwards. The wheelchair frame will begin to fold inward.
4. Продолжете да влечете додека инвалидската количка не се склопи целосно.

Слика: Страна view of the Everest & Jennings Advantage LX Wheelchair in its compact, folded configuration.

Слика: напред view of the Everest & Jennings Advantage LX Wheelchair in its compact, folded configuration.

Одржување

Regular maintenance is crucial for the longevity and safe operation of your wheelchair.

1. Чистење

• Рамка: Избришете ја рамката со рекламаamp cloth and mild detergent. Dry thoroughly. Avoid abrasive cleaners.
• Тапацир: Clean the nylon upholstery with a mild soap and water solution. Rinse and air dry completely.
• Тркала и гуми: Keep wheels and tires free of dirt and debris. Inspect tires for wear and proper inflation (if pneumatic).

2. Распоред на инспекции

• Дневно: Check brakes for proper function. Ensure all quick-release axles (if applicable) are securely locked.
• Неделно: Inspect tires for wear and damage. Check all nuts and bolts for tightness. Ensure footrests/legrests attach and detach smoothly.
• Месечно: Lubricate moving parts as recommended by a qualified technician. Inspect the frame for cracks or bends.

Слика: Крупен план view of the rear wheel axle and its connection to the wheelchair frame, illustrating a key area for maintenance inspection.

Решавање проблеми

This section addresses common issues you might encounter with your wheelchair.

• Сопирачките не држат: Check if the brake pads are making full contact with the tires. Adjust the brake mechanism if necessary, or consult a technician.
• Тркалата не се вртат непречено: Inspect for debris caught in the axles or bearings. Ensure wheels are properly aligned and lubricated.
• Footrests/Legrests are loose: Verify that the attachment pins are fully engaged. Tighten any visible fasteners if they appear loose.
• Звуци на чкрипење: Identify the source of the squeak. Often, lubrication of moving parts (e.g., folding mechanisms, axles) can resolve this.

If you experience persistent issues or problems not listed here, please contact customer support.

Спецификации

Што има во кутијата:

• Everest & Jennings Advantage LX Wheelchair

Image: An overhead perspective of the wheelchair seat, illustrating the available 20-inch width and 16-inch depth dimensions.

Гаранција и поддршка

For warranty information, please refer to the documentation included with your purchase or contact Graham-Field directly. For technical support, parts, or service inquiries, please reach out to the manufacturer.

Контакт информации за производителот:

• Телефон: 1-678-291-3207
• Бренд Webсајт: Visit the Graham-Field Store on Amazon