1. Вовед
This manual provides detailed instructions for the installation, operation, and maintenance of your WOOCH M8-LOCK RFID Electronic Cabinet Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety. This lock is designed for use with wooden cabinets, drawers, lockers, and cupboards, offering a hidden and secure access solution.
2. Информации за безбедност
- Ensure the lock is installed on a stable surface.
- Keep RFID cards and fobs away from strong magnetic fields to prevent data corruption.
- Do not attempt to disassemble or modify the lock, as this may void the warranty and compromise security.
- Replace batteries promptly when the low battery alert sounds to avoid being locked out.
- Овој производ е наменет само за внатрешна употреба.
3. Содржина на пакувањето и производview
3.1 Содржина на пакетот
Проверете дали сите артикли се присутни во вашиот пакет:
- Lock Base (x1)
- Бравата (x1)
- Key Cards (x2)
- Key Fobs (x2)
- USB кабел (x1)
- Завртки (x6)
- 3M лента (x2)
- Location Icon (x1)
- Упатство за употреба (x1)
- Installation Diagram (x1)
Figure 3.1: WOOCH M8-LOCK Package Contents
3.2 Компоненти на производот
Familiarize yourself with the main components of the lock system:
- Lock Base: The main electronic unit containing the locking mechanism and battery compartment.
- Заклучок: The metal component that secures the door or drawer when locked.
- RFID Cards/Fobs: Used to unlock the cabinet.
- USB кабел: For emergency power supply if batteries are depleted.
- Копче за ресетирање: Used for programming and resetting the lock.
- Induction Area: The sensing area on the lock base where RFID cards/fobs are swiped.
Figure 3.2: WOOCH M8-LOCK Components
Figure 3.3: Power Supply Options (4x AAA Batteries or USB Cable)
4. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | WOOCH |
| Број на модел | M8-LOCK |
| Тип на заклучување | РФИД заклучување |
| Материјал | Метал |
| Боја | Црното |
| Димензии на ставката (Д x Ш x В) | 3 x 3 x 1.2 инчи (76 x 76 x 30.5 мм) |
| Препорачана употреба | Wooden cabinets, drawers, lockers, cupboards |
| Протокол за поврзување | РФИД |
| Извор на енергија | 4 x AAA Batteries (not included), USB Cable for emergency power |
| Card Penetration Depth | Up to 1.5 inches (38mm) for wood panels |
| Компатибилност на дебелината на вратата | 0 - 1.2 инчи (0 - 30.5 мм) |
Слика 4.1: Димензии на производот
5. Инсталација
Before beginning installation, ensure you have the necessary tools: a drill, screwdriver, and pencil. Use the provided installation diagram and template for precise placement.
5.1 Подготовки за инсталација
- Одредете поставеност: Choose a suitable location inside your cabinet or drawer where the lock base and latch will not interfere with the door/drawer mechanism. The RFID sensor can penetrate wood up to 1.5 inches thick.
- Обележување: Use the provided installation template to mark the screw holes for both the lock base and the latch. Ensure the lock base and latch are aligned correctly for your specific application (drawer, sliding door, swing door, or box).
Figure 5.1: Installation Template
5.2 Installing the Lock Base and Latch
- Дупчете пилотски дупки: Carefully drill pilot holes at the marked locations.
- Attach Lock Base: Secure the lock base to the inside of the cabinet/drawer using the provided screws. Alternatively, use the 3M adhesive tape for a non-permanent installation, ensuring the surface is clean and dry.
- Прикачете ја бравата: Secure the latch to the corresponding position on the door/drawer frame using the provided screws. Ensure the latch aligns perfectly with the lock mechanism when the door/drawer is closed.
- Test Alignment: Before fully tightening, test the lock's functionality with an RFID card/fob to ensure smooth operation and proper alignment. Adjust as needed.
Слика 5.2: Инсталација Examples for Various Furniture Types
Figure 5.3: Installed Lock on a Cabinet
6. Упатства за работа
6.1 Инсталација на батерија
The lock requires 4 AAA batteries (not included). Open the battery compartment on the lock base and insert the batteries, observing the correct polarity. Close the compartment securely.
6.2 Programming Keys (Master Card/User Cards)
The lock supports one Master Card and up to 10 User Cards/Fobs. The first card/fob programmed after initialization becomes the Master Card.
- Иницијализација (ресетирање): After installing the batteries, use a small, hard object (like a pin or a thin screwdriver) to press and hold the RESET button located through the small hole on the front of the lock cylinder. Hold until you hear a long beep, then release. This clears all previously programmed cards.
- Set Master Card: Immediately after initialization, swipe the first RFID card or fob over the induction area of the lock base. You will hear a short beep, indicating it has been set as the Master Card.
- Set User Cards: After setting the Master Card, swipe the Master Card over the induction area. The lock will beep once. Then, swipe each additional RFID card or fob you wish to program as a User Card. Each successful programming will be confirmed with a short beep. Repeat for all desired User Cards (up to 10).
- Излезете од режимот на програмирање: Swipe the Master Card again to exit programming mode. The lock will beep twice.
Figure 6.1: Resetting and Programming the Master Card
Figure 6.2: Programming Steps
Figure 6.3: Two Unlock Modes (Single and Dual)
6.3 Unlocking the Cabinet/Drawer
Simply swipe a programmed RFID card or fob over the induction area on the outside of the cabinet/drawer. The lock will beep and unlock, allowing you to open it. The lock will automatically re-lock after a few seconds or when the door/drawer is closed.
7. Одржување
- Замена на батерија: The lock will emit a long beep when the battery is low. You will have approximately 15 uses remaining after this alert. Replace all 4 AAA batteries promptly to ensure continuous operation.
- Итна моќност: If the batteries die completely, connect the provided USB cable to the external USB port on the lock base and a power bank or USB charger to temporarily power the lock and open it.
- Чистење: Wipe the lock and sensor area with a soft, dry cloth. Do not use abrasive cleaners or solvents.
8 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Lock does not respond to RFID card/fob. |
|
|
| Lock beeps continuously after battery installation. | Предупредување за слаба батерија. | Веднаш заменете ги сите 4 AAA батерии. |
| Бравата не се вклучува/одврзува непречено. | Misalignment of lock base and latch. | Re-adjust the position of the lock base or latch to ensure proper alignment. |
| Cannot program new cards. |
|
|
9. Гаранција и поддршка
9.1 Информации за гаранцијата
WOOCH products are designed for durability and reliability. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or contact customer support for specific warranty terms and duration.
9.2 Поддршка за корисници
If you encounter any issues or have questions regarding your WOOCH M8-LOCK RFID Electronic Cabinet Lock, please contact our customer support team. We are committed to providing assistance and ensuring your satisfaction.
Контакт информации:
- Webсајт: Visit the WOOCH Store on Amazon
- Е-пошта: Погледнете го пакувањето на производот или официјалниот webстраница за поддршка преку е-пошта.
- Телефон: Погледнете го пакувањето на производот или официјалниот webстраница за телефонска поддршка.