FX-2001-6K and FX-2001-6KU
One Analog Loop Fire Alarm Kit
FX-2001-6K One Analog Loop Fire Alarm Kit
THIS DOCUMENT, LT-915, ONLY DESCRIBES MECHANICAL INSTALLATION.
FOR ALL OTHER INFORMATION, REFER TO LT-657 FX-2000 INSTALLATION AND OPERATIONAL MANUAL.
SPECIFICALLY, FOR ANY INFORMATION RELATED TO WIRING REFER TO “TABLE OF CONTENTS” ON LT-657 MANUAL FOR FIELD WIRING.
The Model FX-2001-6K is a one addressable loop fire alarm kit which includes a beige BBX-1024 Enclosure and a main chassis with main fire alarm board which provides one addressable loop. The Model FX-2001-6KU is the same kit as the Model FX-2001-6K except this kit has a red enclosure BBX-1024R. Both models have 6A power supplies. Mechanical Installation: Mount the BBX-1024/R enclosure as shown below in Figure 1.
Figure 1: BBX-1024 Backbox Enclosure
LEAVE BOTTOM OF BOX CONDUIT FREE FOR BATTERIES
The chassis setup for each kit is shown in Figure 2 below.
WIRING:
- For main fire alarm board addressable loop wiring see the LT-657 FX-2000 Installation Manual.
LT- 915 Rev. 1 Mar 2011
firealarmresources.com
Documents / Resources
 |
Mircom FX-2001-6K One Analog Loop Fire Alarm Kit [pdf] Instruction Manual FX-2001-6K One Analog Loop Fire Alarm Kit, FX-2001-6K, One Analog Loop Fire Alarm Kit, Analog Loop Fire Alarm Kit, Loop Fire Alarm Kit, Alarm Kit, Kit |
