MinION-Mk1C-All-In-One-Portable-Sequencer-logo

MINION Mk1C All-In-One Portable Sequencer
MinION-Mk1C-All-In-One-Portable-Sequencer-pro

Pre-installation

Before using the device, familiarise yourself with the following:

MinION Mk1C User Manual
community.nanoporetech.com/to/mk1c
Safety and regulatory information community.nanoporetech.com/to/safety

What’s in the box:MinION-Mk1C-All-In-One-Portable-Sequencer-1

Set up your device

  1.  Unpack your MinION Mk1C*
  2.  Attach a networked Ethernet cable (required for set up)
  3. Connect the power supply
  4.  Press the power buttonMinION-Mk1C-All-In-One-Portable-Sequencer-2

* Place device on a stable surface. Do not cover ventilation grilles. MinION Mk1C is designed to sequence at ambient temperatures of 10–30⁰C.

Log in

Enter your Oxford Nanopore account details to log in to the deviceMinION-Mk1C-All-In-One-Portable-Sequencer-3

Tip: View the pop-up tutorials to learn how to navigate the user interface

Perform hardware check

A hardware check is required before performing your first MinION Mk1C sequencing run. To initiate the hardware check, see the workflow below or follow the on-screen tutorials. For troubleshooting, refer to the User Manual.

Power off the device

  1. Select Host settings in the side panel, then click the Shutdown button
  2. In the pop-up box, select Shutdown. The touchscreen will turn black and the power button LED will turn off

Discover the Nanopore Community

community.nanoporetech.comMinION-Mk1C-All-In-One-Portable-Sequencer-4

Ensure the success of your nanopore sequencing project and stay up-to-date with the latest technology and protocol updates Use our protocol builder to design your complete, end-to-end sequencing workflow

Additional information

Storage and warranty
MinION Mk1C device: Do not expose device to temperatures outside of 5–40ºC. MinION Flow Cell warranty: community.nanoporetech.com/to/warranty
Recycle used flow cells
Oxford Nanopore is committed to environmental sustainability. Please help us by sending back your MinION Flow cells for recycling. Find out how: community.nanoporetech.com/support/returns
Support

For all of your support requirements from device set up to protocol optimization visit the Nanopore Community: community.nanoporetech.com/support

Documents / Resources

MinION Mk1C All-In-One Portable Sequencer [pdf] User Guide
Mk1C, All-In-One Portable Sequencer, Mk1C All-In-One Portable Sequencer

References

Leave a comment

Your email address will not be published. Required fields are marked *