MDS-10T
Field Guide
MDS-10T Dual Sensor Detector

MDS-10T Unfolding Procedure

1. Extend the Lower Shaft
   
2. Unfold the Detector
   
3. Unfold the Sensor Head
   
4. Position the Armrest
   
5. Extend the Middle Shaft
   

Attach Battery

Factory Reset

Quick Start

1. Turn On
   
2. MD Ground Balance
   
3. MD Test Piece
   
4. GPR Skyshot
   
5. GPR Test Target
   
6. Begin Detecting
   

Documents / Resources

MINELAB MDS-10T Dual Sensor Detector [pdf] User Manual MDS-10T, MDS-10T Dual Sensor Detector, MDS-10T Detector, Dual Sensor Detector, Detector

References

• User Manual