MINELAB MANTICORE Metal Detector User Guide

Contents hide

1 GETTING STARTED GUIDE

2 QUICK START

7 Documents / Resources

7.1 References

8 Related Posts

GETTING STARTED GUIDE

QUICK START

1

TURN ON

2

SELECT SEARCH MODE

3

NOISE CANCEL

4

GO DETECTING

SEARCH MODES

ALL-TERRAIN
Great for high-trash recreational areas, fields and historical locations including most general detecting.

GENERAL FAST LOW CONDUCTORS

HIGH CONDUCTORS TRASH REJECT

BEACH
Perfect for all salty conditions – dry sand, wet sand, surf and underwater.

GENERAL LOW CONDUCTORS

DEEP SURF & SEAWATER

GOLDFIELD
Ideal for gold nugget prospecting in mineralised goldfield locations.

GENERAL

Can’t decide which Mode to use?
Use the General Mode for your detecting location.

ASSEMBLY

TIGHTEN CAMLOCKS

Tighten the Camlocks if they slip or become loose.

Open Tighten gently in increments

Close Check and repeat if needed

CHARGING

7-8 HOURS

CAUTION: Charge your detector with a good-quality USB charger that has a minimum charging capacity of 2A @ 5V. Risk of USB charger failure if a low-quality charger is used.

Look for the following marks on USB chargers:

CAUTION: Only charge the detector in ambient temperatures between 0°C and +40°C.

3 HOURS

CONTROLS & DISPLAY

SETTINGS MENU

Press from the Detect Screen to open the Settings menu.

1 Back

General Settings
Frequency
Audio Theme
Target Tones
Ferrous Tones
Ferrous Limits
Discrimination Pattern
Recovery Speed
Ground Balance
Noise Cancel
Search Mode
Volume

1 Flashlight
2 Tracking Ground Balance
3 Wireless Audio
4 Light Sensor
5 Headphones Connectivity
6 Battery Level/Charging

7 Target ID Number

Conductive ID Conductive ID with Ferrous Indicator

Salt Indicator (Beach Modes only)

8 Wireless Audio On/Off
9 Target Depth Indicator
10 Side Soft Key

11 ID MAP

a) Ferrous Limits
b) Target Trace (e.g. nail)
c) Discrimination Pattern
d) Target Trace (e.g. coin)
e) Target ID Scale Conductivity
f) More Ferrous
g) Less Ferrous

12 Navigation Arrows (×4)
13 Pinpoint
Press from the Detect Screen to toggle Pinpoint mode
14 Sensitivity
Press / from the Detect Screen to adjust Sensitivity
15 Action Bar Soft Keys (×2)
16 Action Bar
Actions/icons change depending on settings or the current screen
17 Backlight/Lighting
18 Sensitivity Level
19 Power
20 Frequency
21 Search Mode
22 Large Metal Overload
23 Charge Status LED

Scan the QR code or visit www.minelab.com/manticore for all product downloads including the full-length User Manual, specifications, software updates and learning resources.

Get these languages and more: